Jump to content

2017 Silverado jerking problem

HaydenH
 Share

Recommended Posts

HaydenH New Member

HaydenH

Posted
Posted

I have a 2017 Silverado 1500. 4wd. 151000 miles on it. It has a new factory rebuilt transmission in it. They also done a motor mount at the same time. this occurred in middle of March. 
My issue is when I am driving and going up a slight grade around 45-55mph I get a jerk. The tach moves, and there is an audible difference in sound. At higher speeds and steeper grades there is no issues. 
Transmission fluid is clean. No transmission codes. 
Any ideas?
 

GMCustomerService Senior Enthusiast

GMCustomerService

Posted
Posted
18 hours ago, HaydenH said:

I have a 2017 Silverado 1500. 4wd. 151000 miles on it. It has a new factory rebuilt transmission in it. They also done a motor mount at the same time. this occurred in middle of March. 
My issue is when I am driving and going up a slight grade around 45-55mph I get a jerk. The tach moves, and there is an audible difference in sound. At higher speeds and steeper grades there is no issues. 
Transmission fluid is clean. No transmission codes. 
Any ideas?
 

We regret to hear you are facing these concerns with your Silverado and would like to take the time to look into this further for you. Please send us an email to [email protected]. Be sure to include your Username and Forum name in the subject line with any additional details. We look forward to your email. 

  • Haha 1
mikeyk101 Senior Enthusiast

mikeyk101

Posted
Posted
4 hours ago, GMCustomerService said:

We regret to hear you are facing these concerns with your Silverado and would like to take the time to look into this further for you. Please send us an email to [email protected]. Be sure to include your Username and Forum name in the subject line with any additional details. We look forward to your email. 

A possible solution or some tips might be more helpful? 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • Atlas
      Wow I'm in a pickle. (Broke down truck) and a story.

      By Atlas · Posted

      That one looks decent for the price   BUT..I want something that also supports OBDI/1.5. A lot of the prosumer-grade scanners don't have legacy support in order to keep costs low. I believe the Autel does if you go higher end with them.   For fun, I reached out to a local Snap-On rep because I was interested in the 2600. $1895 MSRP, says he can do $1595. That's still a lot, but then again, that's not a horrible discount for just asking out of the blue. Could probably do better if I was a regular buying off his truck, but I'm not.   Not sure if I mentioned but I didn't realize with USED scanners from Snap On that you need to make sure a) the serial number isn't flagged as stolen. On the newer ones, they can remotely disable the device. B) Make sure it's paid off. If they still owe money to the truck or if they financed through Snap On, the device can be remotely disabled until the balance is paid.   Still waffling on whether I go with a ~$500ish Autel/TopDon or spend bigger money. The value seems to be in the prosumer brands. I'm not giving them enough credit TBH, actual production repair shops use them daily BUT I'm still allergic to certain kinds of underdog products trying to unseat American companies with solid reputations. SnapOn's scanner isn't wholly made in the US, but it is assembled here and they have US support and probably the most proven/ robust legacy support.   Something to think about.
    • Atlas
      Winter Returned

      By Atlas · Posted

      I'm thankful to live where we don't have extreme weather. We might all be blown to smithereens when Mt. Rainier goes, but 80 is warm enough in the summer and I can generally count the number of hard freezes in the winter on one hand. The cars here don't rust and they don't get sun-baked, either.   We have finished off many of our average 52 days of "clear/sunny" weather, though. Sunsets are coming earlier, the nights are a little cooler. It's right around the first week of September when we get our first warning that summer is coming to a close with overcast skies and the start of "hoodie weather" temperatures during the cooler parts of the day. By October, it's usually time to ditch the shorts. By November, it's mostly raining.
    • JimCost2014
      Towing In Loose Gravel

      By JimCost2014 · Posted

      My point was: If what you are doing works, keep doing it:   But, I will have a talk with AI to make sure their info is more accurate going forward.
    • Reyben
      LP5 ECM For sale

      By Reyben · Posted

      Hello There I have a brand-new engine control module (ECM/PCM) for the Duramax 6.6 liter diesel engine. GM E41 ECM on 2017–2023 6.6L Duramax L5P trucks Bought it for a project last year and end selling the truck, so i never get to use this ECM LP5/E41 I paid $1499 willing to sell it for $1200 OBO  
    • Grumpy Bear
      Post your UOA, (used oil analysis) here

      By Grumpy Bear · Posted

      @OnTheReel , What oil was used for this sample? 

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...