Jump to content

Impact Sensor 15297468

Edward Tycenski
 Share

Recommended Posts

  • 2 months later...
tigers2007 Enthusiast

tigers2007

Posted
Posted

This part is no longer available from Dorman (part #590-206). BUT it appears that some of the Advance Auto Parts - Carquest family of stores still have this part on the shelves as old stock. I noticed that you can use their 20-25% coupon codes to make an online order and then pick one up at a nearby store (seems like only Carquest stores have this part) or just do a ship-to-home order for about $140. I actually spoke with Dorman tech support. This part was sourced by the OEM in Singapore and they stopped making the part for Dorman so its 100% over with. Once they're gone, they're gone. I'm not sure where WVE is getting the part from nor where ACDelco is getting them (new part #85598007 $215).

I opted to go to my local U-Pull U-Pay lot and started to grab these off of trucks. Bring a multimeter to test them to make sure you're not grabbing junk. You should get some sort of ohm reading/continuity. If its open (no continuity) then the sensor is garbage. If the sensor has a bulge behind the stick or a crack, it is from corrosion and the sensor is destroyed.

Another piece of free advice: the 15297468 sensor is ONLY compatible with 2007-2008 GMC Sierra and Chevrolet Silverado 1500's. Not 2500HD or 3500HD nor the SUV's. That specific part number (15297468 or 85598007) will only work with the 07-08 half ton pickups only. This is part of the system design and that is for a reason. I wouldn't screw around with Supplemental Restraint System (SRS) parts; just do it right.

sierra_001a.jpg

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • C/K Man
      Silverado 4500-5500-6500 are they still being produced? Would have sold better as GMCs as well

      By C/K Man · Posted

      There was talk over the last couple of years that the contract to build these trucks between GM and International would not be renewed.  International moved production of all their other trucks besides the companion CV model out of the Springfield plant some time ago when they opened their San Antonio plant.  That left Springfield only building the Silverado Medium Duty, International CV Series, and some Express/Savanna long wheelbase cutaways.  International also put the plant up for sale some time ago.  This all answered my earlier question as to why GM and International did nothing with these trucks since they were introduced, as they had basically become a market 'placeholder' with a finite life.    The Silverado Medium Duty/International CV trucks were interesting combination of a GM powertrain, electrical system, and K2XX Silverado cab with an International chassis that was supposedly designed for a step-van type vehicle they never produced.  They were manufactured in International's Springfield plant along with the IH MV series initially.  When first introduced, there was much talk that the Silverado Medium Duty/CV would eventually get a gasoline engine option along with other upgrades and GM and IH would work on a class 6/7 joint venture truck.  This was before VW bought Navistar out, after that happened no more was said.  Draw your own conclusions...   About the time talk started that the GM/IH joint venture was not going to be renewed, rumors started that GM would develop a new line of medium duty trucks themselves.  The story is the new trucks will be part of the next generation HD's due in 2028, and will still feature a 'straight rail' chassis design that the current medium duty has.  GM views this as a desirable feature that differentiates their truck from the competition.  A gasoline engine option is also expected.  As the current Silverado Medium Duty remains in production until September 2026 and there is still a lot of inventory available do not expect any official word for some time.   I believe GM remains committed to their successful partnership with Isuzu, and all the LCF models will still be available from Chevy Commercial dealers.  Isuzu is on the cusp of opening a new large plant in South Carolina and there is also speculation that this may result in new product for both Isuzu and Chevy Commercial dealers.                  
    • davester
      push to talk button

      By davester · Posted

      drive the truck back to the dealer and complain that the button works.
    • davester
      push to talk button

      By davester · Posted

      drive the truck back to the dealer and complain that the button works.
    • nfisherman
      Software Update

      By nfisherman · Posted

      I have a 2026 2500 HD Ultimate. My phone app says there’s a software update available. It’s something about improved battery management and something to do with the running boards. I follow the instructions for the update but the “Check for Updates” option is greyed out in my settings menu. Has anyone else seen this? How did you resolve it? The help message just says “see your dealer” if the download doesn’t work. I’m just trying to save a trip. 
    • newdude
      Exhaust Question

      By newdude · Posted

      Fuel mileage?  That's all how you use your right foot.  Exhaust will give you sound.   Stock exhaust 5.3 is 2.75" diameter piping.     If the truck is nice and worth putting some $$ into it, I'd go for a Corsa catback.  I had one on my 2019 old body 5.3 and it was just perfect.  Zero drone, just driving around and cruising on the highway you'd think it was stock, but when you opened it up it was like a Camaro with the factory dual mode.  Corsa bumps their catback to 3in diameter.  

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...