Jump to content

Adding Cameras

Jackson Lanich
 Share

Recommended Posts

Jackson Lanich Enthusiast

Jackson Lanich

Posted
Posted

I have read through multiple threads here and other sites and most people say it isn't possible but I want to see if anyone has tried it. I have a 2020 Silverado Trail Boss LT. It is a amazing truck but lacks all of the luxury features found in higher trim models. I only have the single reverse camera and want to add the rest of the OEM cameras, bed view, top reverse view, both mirrors, front, and trailer provisions. Everything that is needed for the 360 View. I have the IOR radio. I know it will be expensive and probably not worth it but if it is possible I want to do it. I know I will need to upgrade my radio to IOU and get a VPM. Has anyone done this or know if I can and where to start. I'm not afraid to tear the truck apart to do the install but I don't want to spend thousands of dollars and lots of hours installing stuff just to find it doesn't work.

Jackson Lanich Enthusiast

Jackson Lanich

Posted
  • Author
Posted

Rally6.2RST had the camera in the 3rd brake light from the factory I do not. Most people say that is a requirement but I have also heard that if you don't you have to change out and program the BCM.

Haufski762 Enthusiast

Haufski762

Posted
Posted (edited)

I successfully added two side cameras, front grille and a trailer camera.

 

I used the echomaster kit. Intellihaul 3.0

Gm pn#19433460

 

It was plug and play. You just have to call the dealership and confirm your truck has the factory connections. 

 

There is also gm pn#19433462 

 

The difference is the mirror cameras. If you have the larger tow mirrors, use the xxxx2

. If you have smaller mirrors use xxxx0.

 

You can shop gm parts acessories site or on your my chevrolet app for deals. Mine was 25% off. 

 

Edited by Haufski762
Bikerjon Enthusiast

Bikerjon

Posted
Posted
9 hours ago, Haufski762 said:

I successfully added two side cameras, front grille and a trailer camera.

 

I used the echomaster kit. Intellihaul 3.0

Gm pn#19433460

 

It was plug and play. You just have to call the dealership and confirm your truck has the factory connections. 

 

There is also gm pn#19433462 

 

The difference is the mirror cameras. If you have the larger tow mirrors, use the xxxx2

. If you have smaller mirrors use xxxx0.

 

You can shop gm parts acessories site or on your my chevrolet app for deals. Mine was 25% off. 

 

Hey Dan. Which Trail Boss trim do you have LT or Custom? What radio do you have IOR?

NCMAN424 New Member

NCMAN424

Posted
Posted

Anyone know how to use the Sierra AT4 surround view cameras to record vs buying dash cams.  I have a friend with a Cadillac and there is a sd card slot in the trunk for this.  Why didn't GM add that feature to the Trucks 

Jackson Lanich Enthusiast

Jackson Lanich

Posted
  • Author
Posted
23 hours ago, Bikerjon said:

Hey Dan. Which Trail Boss trim do you have LT or Custom? What radio do you have IOR?

I don't think any additional cameras can be added to the IOR radio system, even Intellihaul.   My goal was to add the factory cameras but with so many different parts that need changed and new wiring I would need to run before I can see if it will even work makes me hesitant about trying the mods.

  • 3 months later...
c0wb0y84 Enthusiast

c0wb0y84

Posted
Posted
On 9/30/2024 at 9:58 PM, Jackson Lanich said:

I don't think any additional cameras can be added to the IOR radio system, even Intellihaul.   My goal was to add the factory cameras but with so many different parts that need changed and new wiring I would need to run before I can see if it will even work makes me hesitant about trying the mods.

 

This kit claims it can add a front camera to the IOR.

 

https://www.camerasource.com/automotive-backup-cameras/gm-front-side-cameras/2019-2021-gm-front-camera-kit-for-ior-display

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • HeronLeal
      2021 Silverado 2.7L – N232395310 – Can someone with GM dealer access check my VIN?

      By HeronLeal · Posted

      Just want to make sure it is covered by Special Coverage N232395310 Evaporative Emission Purge Pump 2021 Silverado 1500 Custom 2.7L L3B ~100k miles I'm getting DTCs P146B and P146F. VIN 3GCPWBEK2MGxxxxxx   I spoke to a person that works at GM and he said it is not covered after checking my VIN.   Is there anyone here who currently works for a GM/Chevrolet dealership and has access to GM Global Warranty Management / Investigate Vehicle History who could explain how the VIN eligibility is determined?   thank you    
    • jgaudet99
      Tire psi

      By jgaudet99 · Posted

      Thanks for all that information, I might purchase one and see if it will work for me, if not they may let me return it! Yes for sure the tires are definitely within limit for my truck empty, and when I do tow I'll definitely make sure to raise the rear psi for the amount of weight that's going to be on it.
    • Chuck FB
      Tire psi

      By Chuck FB · Posted

      Yes exactly, more and more these days people/companies are afraid of liability issues so its easier just to say no rather than risk putting their neck on the line.    I will say with the Autel unit or when I used it last year on my truck, it wasn't like I could choose the 2025 model year or even the 2024 model year as that option was not there to manipulate the placard pressures but had to go back to 2023 or there abouts and then it showed up as an option, odd but that was how the software was then and I can't say one way or the other now as they throw out updates every so often. I still would talk to your tire dealer though to start with and they may do it for nothing but also they may have a comment on a better unit to purchase. All I know is that one of the large tire shops in my area happens to use these Autel units for their use and set them up to use the wifi and all of that jazz for constant updating because each tire tech has one handed to them by the shop but I just plugged it into my laptop to update it and yes if one is bought it has to be registered so you can get the link to do updates and then the unit has to be updated before its even used. I am not at all techy so it took me a bit but anyway just a heads up for anything you buy, most likely it will need to be connected to a computer to access the internet to have it updated to the latest software version before you can put it to use.   If your truck is near empty, those tire pressures you listed are a very safe upper range pressures to carry the weight, both the front and rear as I know they could be run lower yet with an empty truck. And if its a trailer and not some motorcycle your going to strap onto the front of your truck on a rack, you shouldn't have a need to inflate your front tires if your at 55 front already, its the rear ones that would need more air if you have much hitch weight. 
    • jgaudet99
      Tire psi

      By jgaudet99 · Posted

      Thank you, I'll check that Autel scanner out and see if it will work for me! Ya I can see GM's point of view if they lower the psi set value for someone and the person sell's the truck and the new owner puts the factory tires back on then their could be liability issues cause the psi warning light wasn't coming on when the tires were under inflated for towing their load and then it might be able to be traced back to GM lowering it.
    • Chuck FB
      Tire psi

      By Chuck FB · Posted

      I had a similar but different response when I talked to the service manager where I bought my truck in that he said GM corporate won't allow them to lower the placard pressure setting as they would get their hand slapped but that of course they have the ability to make that change. His suggestion was simply go to a tire dealer or third party shop that is willing to reset the pressures lower. However I chose to buy a tpms tool and partly based off of this very forum as it had been proven to work on the 2024 model ( Global B system ) and while I could have paid lots for a full two way diag tool, I didn't want to spend that much and bought the recommended Autel TS 508 and it will reprogram the 2025 model and assume it should do the 2026 as well. However the tool is rather proprietary to reprogramming Autel tpms sensors so that is a function I will never use, where as a real two way scanner would have many uses but also have yearly subscriptions etc where this 508 is free updates for as long as they put updates out for the unit. In any event it worked to lower the placard pressures and I often use it to adjust my actual tire pressures although will check with a mechanical gauge as well sometimes just to make sure that tires tpms sensor isn't lying to me.    My suggestion is either buy a tool that you know will work to adjust the system or start out by getting the tire shop you bought your tires from to reset your truck and if after that you still want a unit to do it yourself, get one at that point. 

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...