Jump to content

SMART car


Black02Silverado

Recommended Posts

Posted
This is interesting. But still the individual inside would have to be strapped in like a NASCAR driver.

 

Crash video

 

 

 

 

I noticed the barrier was not perpendicular and had a slant which would have deflected the crash energy mostly to the left centre as shown on the right side of the car.

 

I see these things on the highways and compare their safety only slightly better than riding a motorcycle on the roads. Just think if a semi hits it -- bye bye driver and passenger!

Posted
Small cars are great in single car wrecks. The problem comes in when you add a 6k lb pickup truck into the mix.

 

 

 

 

Freakin' rednecks in their rolling billboards for conspicuous consumption. :fume: Why can't they all drive normal vehicles?

 

 

 

 

 

 

 

 

 

:)

Posted

What's that car weigh? 1500 Lbs? Add the weight of two adults to it and try it again and then show me how it "Survived". It's like dropping an empty beer can off the roof of your house. Not much damage, compared to dropping a full one.

Posted

The real value of this clip is that it puts you in the google video search tool.

 

Search for crash.

 

There are quite a few cool crash videos, in the first 5 pages of results.

Posted

I don't think the damage would be much different adding a large vehicle into the mix... The energy would be deflected, like the car hitting the solid barrier deflected to the side. I think something similar would happen the small car would simply be knocked out of the way rather than a larger car trying to hold it's ground and sustaining more damage, plus it is a much smaller target to hit. :D

  • 6 months later...
Posted
This is interesting. But still the individual inside would have to be strapped in like a NASCAR driver.

 

Crash video

 

 

 

 

Your kidding, right? :rant: They are Crash Test Dummies. We already have those cars up in Canada. Now we have to look for motorcycles AND Smart cars in our blind spots.

Posted

Somehow I don't see those doing very well in the States, high gas prices or not. IMO that car is about as ugly as the Mercedes A class. I'd sooner buy a VW Jetta or Passat TDI, settle for 45-55mpg, and still retain some usable space and crashworthiness.

 

Not a smart fan.

Posted

You will probably see them in the big cities. All the tree huggers will scoop them up. Its the tree huggers up here in Canada that are buying them.

Posted
You will probably see them in the big cities.  All the tree huggers will scoop them up.  Its the tree huggers up here in Canada that are buying them.

 

 

 

Yep, that's true....and I hope they don't hit a tree when driving one of those. It'll put a different meaning to 'tree hugger'. :rolleyes:

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,914
    Total Members
    8,960
    Most Online
    AidenVorpagel
    Newest Member
    AidenVorpagel
    Joined
  • Who's Online   3 Members, 0 Anonymous, 1,283 Guests (See full list)

  • Latest Articles

  • Posts

    • Thanks newdude!  By the time manual selection is needed, I'm probably too much of a control-freak to depend on the transmission sensing braking to activate automatic downshifting.  I would be anticipating the situation and already be manually downshifting.   This truck replaced a 2004.5 LLY diesel with the Allison 5-speed.  Putting it in T/H made noticeable differences (when the torque converter locked, upshift points, downshift behavior).  On this 2024 gasser with the 10L1000 I haven't been able to detect much, if any, difference.  Ok, I can never tell now when the torque converter locks up.  But I also don't notice differences in shifting.  For downhills, I've probably already manually downshifted by then anyway.  Since it's also more awkward (than the 2004.5) to engage/disengage I don't even bother.  Or maybe it doesn't really matter with just a 3k lb. camper in the bed?   Thanks also for the list of reasons the charging system might select various voltages.  However, what I am seeing doesn't fall into any of those categories.  It very definitely, and very consistently, rises after coasting/braking.  Maybe not immediately, but not very long after coasting/braking.  Very consistently drops voltage when no longer coasting/braking.  It might also be interacting with the camper battery charging (I might disconnect the camper and see if it changes the charging behavior).  I also need to recheck turning on headlights for when I want to force it to charge the camper.   Another JR, in June I converted the camper to LiFePO4.  Since it's not a good idea to try to charge lithiums directly using truck, I installed a Victron Orion XS DC-DC charger (which BTW is AMAZING!!).  Being cheap, I only had to buy that one item (besides the battery, of course) to do the conversion.  The camper OEM 120v battery charger (only 19 years old and works perfectly) and the truck feed the input to the DC-DC charger (not at the same time).  But I didn't want the camper charger feeding back to the truck so I kept the old separator.  I considered replacing the separator with a 30amp diode but that means more work and might add another 1/2 volt drop.  One thing that surprised me was the voltage drop over the long 10awg wire run, so I can only charge smoothly at 8 amps (because the DC-DC charger is completely configurable).  Another reason I don't want an added voltage drop with the diode.  I might also be a little lazy but all this work is being done under the sink with a small cabinet opening.    
    • apparently CA smog is (or at least was)  checking that the vehicle is using the oem and/or a ca smog approved tune, so I expect you'll fail inspection doing it.
    • yes, leaking exhaust will mess up o2 sensor readings, which in turn messes up fuel trims.
    • 286,740 Mile Services   8/6/2026   New AC Compressor. Refrigerant oil and dye, evacuate and charge system.  New exhaust system from cat back.  New Iridium plugs plus replace #3 coil Repair/rewire headlamp wiring (passenger side) and replace all forward bulbs. Polish lenses of both assemblies.  Pull rear rotors, clean and adjust parking assembly. Inspect, clean and grease front calipers. Check pads and shoes.  4 wheel power bleed of brake system. Dot 4 Reset idle speed 50 rpm higher New Serpentine belt.    Will need new pads in the rear in about 5K more miles.    Tax Title and License out the door just short of a grand.    AC clutch had bitten the dust. 1 year warranty on the pick and save replacement. Thing will make a Polar Bear cry Uncle.  He spent quite some time on the wiring. It was in the harness and he does nothing half. I got off cheap. I have considerable more light down the road. Sylvania Silver Star replacements.  Gas seal between the porcelain and shell of plug #3 was blown, cooked the coil. That was the cold miss.  Love the new exhaust. I can sneak into the neighborhood again.  Nice to have a working parking brake again. Belle Tire never got it done. That was disappointing.    This was one of her bigger bills and still way cheaper than a payment even given the oil consumption. This thing cost me under a hundred a month in repairs and normal routine costs. What is my incentive to replace it? 🤔           
    • hello I recently bought a 2012 gmc 1500 with a 5.3 and have a AFM disabler on it I'm interested in doing a cam but I'm worried if I remove the AFM system I will fail smog does anyone have info if they are able to detect that or a work around to it (not talking about hot smogging) please let me know thank you  
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...