Jump to content

BG Products

petemata

By petemata
in Vendor & Product Reviews

Recommended Posts

  • 1 month later...
MS3DALE Senior Enthusiast

MS3DALE

Posted
Posted

We use them here at the dealership,Great products and Great results :D

GatorFan Enthusiast

GatorFan

Posted
Posted
Hi

I hope I'm in the right forum? I was wondering if anyone has any experiance or comments on

BG Products. Any help would be appreciated. 

:D

 

 

 

 

My Sierra only has 38,000 and it sounded like a diesel so I tried the BG fuel cleaner. I added it plus 93 Octane fuel to see if it would "really work." Well, after only 1/4 of a tank, I had ZERO pinging and it ran like a brand new truck. I will swear by this stuff and plan on using it in my other 4X4 (4Runner). This stuff is great. It only cost me around $16 + the gas (which almost broke the bank because of the high gas prices). Anyway, I recommend this product to anyone. Good luck and I hope this helps.

 

Rob

ChevyTech007 Enthusiast

ChevyTech007

Posted
Posted

BG makes the best products. I have been in GM dealers since 83'. I have seen all the snake oil products and BG is not one of them. I wish BG made a product for career change because I would sure take it. Bad decision 23 years ago.

  • 10 months later...

Archived

This topic is now archived and is closed to further replies.

Go to topic listing

  • Latest Articles

  • Posts

    • No1UKnow
      Transmission Woes :-(

      By No1UKnow · Posted

      I wonder as well, why they would send me a text message with links to these suggested procedures totalling over $10,000 without even the slightest hint of how they arrived at these being necessary.
    • Grumpy Bear
      OCI, not when but why?

      By Grumpy Bear · Posted

      https://precisionlubrication.com/articles/oil-filter-efficiency/     For them it is a problem of $$$$ and compliance. To cover both they have to lie from the heart.    Government wants low waste oil numbers so the bar needs to be very low on contamination to met that requirement.  Consumer wants cheap maintenance (perceived cost). Again requiring a low bar.  OEM wants high margins at a cost effective warranty rate and lots of repeat customers. More low bar.  Filter manufacture wants the same thing the OEM wants. See the pattern?   Consumers are fickle and also want perfection requiring a HIGH bar. Inconsistent with all of the above. Consumers can be, when the put their minds to it, inquisitive, love winning arguments which requires some useful information to be available to support them. And this is where it gets sticky and the lies begin.    Information needs a solid well grounded point of reference if we are to compare in a useful way. There is a standard for this.  ISO 4548-12. This standard sets the particle size at a specific Beta ratio and darn few are faithful to its intent.    If they don't state the test method they change the particle size or the Beta ratio to hit a perceived favorable standard. They obscure the information in a way as to prevent direct comparisons leaving the consumer with one method. UOA's with an ISO 4406 test result. Pricey and not allot of labs willing to do the work. Lobby work happens everywhere, not just at the seat of government.       
    • diyer2
      OCI, not when but why?

      By diyer2 · Posted

      IF,IF,IF. If they cared about quality instead of profit and this applies to any company, what a concept. 
    • Christopher Miller
      2001 GMC Sierra - Banging feeling in steering wheel

      By Christopher Miller · Posted

      Good Morning Gents..hope everyone is enjoying a beautiful saturday morning. I have a 2001 GMC Sierra that I bought used in 2018. I am the 2nd owner and its a beautiful truck. Ive put about 60,000 miles on it and recently the front end has felt funny. Kind of loose when hitting bumps adn sometimes I actually feel a "bang" in the steering wheel. I took it to a local guy who said that everything was tight and he tightened the steering box. It didnt feel much better, so I had him replace the front shocks, which had noto been done since I bought it. It had the check enging light on so I took it into a local garage to fix that and check out the suspension. Everything is original and the rubber bushings that I can see look bad. They said everything was tight and there wasnt any play in the front end. Im concerned about the banging feeling in the wheel. Ive been driving this truck for 8 years, so I know how it usually feels and this is something new. Its a second vehicle, so I dont drive it all the time, but Im trying to use it more often. I live out in the country and some of the  roads are kind of rough and I alive on gravel roads. Anyone deal with anything like this before? 
    • KARNUT
      Joke Thread

      By KARNUT · Posted

      Yes of course. There’s no experience in the Trump organization in hiring contractors. it’s not like they’re experienced in that field.😆

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...