Jump to content

New GTO for 2008?


PaulieK

Recommended Posts

Posted

Glad to see it. The technology is finally here to have a nice V8 powered car that passes emissions and gets good milage. These will be fun cars, I hope though that GM puts a good design on the car with excellent quality, especially the interior.

Posted
Lutz added.

 

“It was going to be the world’s greatest car and apparently cost nothing to make. So we’ve started over now.

 

 

If taken out of context, that's a really asinine statement. :sigh:

  • 3 weeks later...
Posted

FYI, by the time that article was written, GM has changed their minds 4 times already.

 

However, the official word is that the Zeta light platform that next gen GTO would ride on is on hiatus for North America for now until GM gets some more "profitable" vehicles to market, I.E. the Tahoe/Suburban and eventually Silverado and their GMC counterparts.

 

The information in Autoweek is old outdated news.

Posted
FYI, by the time that article was written, GM has changed their minds 4 times already.

 

However, the official word is that the Zeta light platform that next gen GTO would ride on is on hiatus for North America for now until GM gets some more "profitable" vehicles to market, I.E. the Tahoe/Suburban and eventually Silverado and their GMC counterparts.

 

The information in Autoweek is old outdated news.

 

 

 

 

Actually that is said to be rumor as well.

 

A March 2005 Detroit News article claimed the Zeta platform had been killed off by GM Chairman Robert Lutz, effectively killing off any hope for a resurrected Camaro as well. Rumors then shifted to suggest a stretched Kappa platform may be used for a future Camaro instead. However, the 2006 NAIAS concept Camaro clearly demonstrates that, to borrow a phrase from Mark Twain, the reports of Zeta's death were greatly exaggerated.

 

That was taken from www.wikipedia.com.

Archived

This topic is now archived and is closed to further replies.

  • Latest Articles

  • Posts

    • I also found this.. API activated emergency provisional licensing because of base oil supply conditions meeting force majeure thresholds.   I wonder what's being substituted for Group III base oils...
    • You seem to be struggling with reading comprehension.   I HAVE SAID 3 TIMES THAT THE BOTTOM OF THE CROSSHATCH IS A QUART BELOW FULL.    I have also said that the manual will not call that "1 quart low" because it is not a quart below the acceptable range in answer to asilverblazer saying that he has never seen the bottom of the marking noted as "1 quart low" in a manual. The wording of the manual allowing for an acceptable range would indicate that .00001" above the add mark is ok. Also, because the manual allows a range, a quart below full and a quart below acceptable are two different volumes. Thus the manual will not use the phrasing "1 quart low"
    • GDI Injector tips are in the combustion chamber and yes, they are subject to the same aromatic hydrocarbon based carbon build up the entire chamber is subjected to. Chevron Techron is a PEA based cleaner (polyether amine)  that is VERY effective if the dose is high enough.  Carbon the tips disrupts the spray pattern so keeping them clean is kind of a big deal. It will clean more than the injector tips. It will keep the inside of the injector tip clean as well. When they shut off they 'hot soak' building varnish internally behind the pintle. The tip, unlike most MFI systems have several orifices of very small diameter. They have to stay clean to work right. That spray pattern is supposed to spray into the cup in the piston, not all over the cylinder walls. Old guys will understand...    Top Tier Chevron has enough of the cleaner to be effective if used regularly. Other solutions could be Shell V Power Nitro + Premium and Exxon/Mobil Supreme Plus Premium ONLY use a different chemistry to the same effect with the added bonus of a friction/antiwear additive as well. Red Line SI-1 is PEA based as well with an upper cylinder lube. There's a white paper on their site for shock treatment of system left untreated for long periods. AMSOIL PI has a full system cleaner of yet another chemistry that will strip carbon out of the power cylinder pretty quick. Gumout Regane is also PEA based but at very low doses and those that are isopropanol based will not be effective. Alcohol content is way to low. Chevron Techron in any pump gas, Use by package instructions. 10 oz per 15 gallons every 3,000 miles. First use may require two treatments.    So, Techron, Red Line SI-1 and AMSOIL PI if batch treating and Shell, XOM Premium or any Chevron Fuel will not just keep it clean, but will clean it if dirty. No other fuel "I'm aware of will do that".    Flex Fuel motors. If you use at least 40% alcohol on a regular basis they won't carbon at all. PEA is not recommended for fuels over E-20     (www.carparts.com)
    • It is always a good idea to exercise it at least every few months to make sure the actuators don’t get stuck. It is also a good idea to actually drive it for at least a few hundred feet when you do that so seals experience motion and oil movement.  Off pavement or snow/ice is best for this, but driving wet pavement in a straight line for a  short distance will work if you don’t have other options. I have  forgotten and gone as long as six months between exercising it on my 2021 and it has always shifted promptly.  I usually just use my straight 300 foot gravel driveway.  
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...