Jump to content

Wierd Problem after trip today


Recommended Posts

Posted

Ok I had a long day.  Early morning hauled mulch and top soil home.  Then took off and went to the beach (lake michigan).  Stayed a few hrs (enough to get burnt).  Did some driving in some sand (gotta love the locker and BFGs).  Then we drove up to our summer cottage (trailer) to cut the grass.  Drove about 100 miles 55-65mph all in D (overdrive) and 60% the time in cruise.  I pull off the main road and come to a stop sign and start to go and i heard a noise.  Next stop sign same noise.  So i turn the radio down come to a complete stop and take off again.  Same noise i though it was coming from the rear end but gf said no its coming from up front.  Next time i heard it i did agree it was coming from upfront.  Well we got there and i crawled under to check things out (the noise sounded like something was broke off).  Everything was fine.  So i started the truck up and drove up and down the street but the noise never came back.  Drove home and noise is gone.  I am thinking it could have been the trans?  Like a rough (had loud clunking) start? Going from a complete stop to hitting the gas could have caused this.  Also it seems like it was computer related cause after i turned the truck off it never came back.  Also no warning lights or anything.  Truck ran fine and i just rolled over 27K

Posted

Here are 2 pics from the day

 

10749371.jpg

 

10749375.jpg

 

That grass is real fun to cut when it is 90+ degrees and 100$ humidity  :crazy:

Posted

If it's a "clunk" it's the same noise I've heard on my truck, not all the time and only when I take off at a stop sign.  I spoke with the service manager at the dealership here and he said it's the slip joint.  They are going to replace it then I take the truck in this Thursday to have the rear windows replaced for "whistling" noise on the highway.  :music:

Posted

Can relate to the grass, did Granny's yesterday with a temp of about 90 and humidity near 100% as well.  As for the truck, your symptoms sounded like the "driveline clunk" but it wouldn't go away like that as you described I would think.  No other guesses from me on it.  Love the indigo blue pictures...can only look at mine so often:)

Posted

If sounds like the rear slip joint, which after handing the

TSB from AllData to the Service Manager refused to replace

in our truck. The Technician instead ordered a new rear differential carrier, and greased the slip joint. The carrier was never shimmed properly and now I have a loud clunk, and oh ya, the "squack, bump squeak" noise from the rear slip joint, my original complaint has returned. The GMC Dealer refuses to

install the nickel plated yoke.

 

Have a great one!

Posted

Want to mow my 23 acres in S.E MO? It's been 88-95 here with 95+ humidity. I do most of the cutting with my ATV pulling a "bush-hog". My wife likes to keep the grass around the house really short because of the snakes...aka cottonmouths! She uses the 38" ride on mower.

Last year I was on the ride-on and went over a yellowjacket nest, got stung something awful. At least I can outrun them on the ATV! :crazy:

BTW, if you'll mow the place, I'll let you fish the "pond". Farm raised catfish and blue gill a plenty!

Posted

We have a POS sears (forrest gump) rider.  It works i guess.  My dads friend found it in an alley and let my dad have it.  Needed a little work.

 

I have you beat me and my cousin drove a rider into a lake.  Pretty scary at the time but funny 5 seconds after it happened

 

Also last yr i was cutting (by pushmower) down by the lake and forgot there was a nest of bees in the RR ties.  I got stung by a swarm of em.  Never in my life was i ever stung previously.  It hurt like a SOB

 

An atv mower would be cool how much does that cost?  Id like one to also put a plow on for winter

Archived

This topic is now archived and is closed to further replies.

  • Latest Articles

  • Posts

    • On the subject of OLM, Gm's OLM tool may be more "informed" than others brands. I recall OLM's in mid-2000's Chrysler products literally counting down a set number of miles. That's all the OLM appeared to be.    I would actually expect GM to be able to explain the parameters that their OLM takes into account from a high level. No, I would not expect them to disclose their software coding or data analysis around their parameters.   So we're talking about two different topics, so to continue the subject on the other one, I'd be curious to know how much "standard particulate matter" in fresh oil is able to be filtered at first start by a fresh oil filter. How much particulate matter is enough to "matter"?   I.e. how much of a "lever" do we think this equates to (variability in particulate content, in fresh oils, between different makes/brands, some which filter less, and some that filter more).   We can say that more particles = more wear = shorter engine life as a logical statement and use that data with a little marketing to scare people into selecting a more refined/filtered oil. Using a similie, is this like deciding to forego two alcoholic drinks in a lifetime because we're worried about the potential impact on lifespan? Are there numbers which translate the ISO test results into a quantifiable increase in wear for a given engine/use case?
    • I'm pretty sure it doesn't actually recalibrate the speedometer it just changes the wheel speed sensor inputs to the computer. The truck still thinks it has stock tires.
    • I apologize, I missed this post, at risk of going off CURRENT TOPIC.   I'm not saying it is BS, I'm questioning how much information is being held back. GM is NOT going to spell out exactly every parameter in the algorithm. Liability, intellectual property, etc.    I'm not naive enough to believe that it is as simple as revolutions, coolant temperature, miles, time; are you?    I don't do irrational either, and boiling the OLM down to four simple values that I could code in an afternoon (I'm not a coder) is irrational - unless it suits your agenda to ignore it. 
    • Chris 21 I appreciate your constructive response. !!  😉😉😉   The 6.6 is gas.  Correct me if I’m wrong but by recalibrating the speedo you’re correcting the shift points of the transmission on these trucks.?.
    • That is a huge misconception.     Bigger does not always equal safer.  Modifying does not make it safer either, with exceptions.   Think of this.  Your truck in stock form is capable of emergency maneuvers, proper stopping distances, its handling is designed around the factory wheel/tire packages, etc.   37s and a lift?  Now you've affected your braking distances, handling and ride control.  You've raised your center of gravity higher.  Your front visibility is now obstructed more than stock, same for your rear.  Does it look cooler?  Yes.  Does it now work as good as it did from factory on road?  NO.       As for my mention of exceptions?  Say you had a sedan or crossover.  They typically come with all season tires.  If you swap out for a performance all season or a summer tire, you improve your car by lowering its stopping distance (better braking because of traction) and improve the handling (regular and emergency) of the vehicle.  That is an actually improving modification.  My old 2019 LD 1500, I ran UHP all season tires on 20in wheels in a factory offered size.  It improved all aspects of how it drove over the Duratracs it came with from the factory in the stock 18" tire.  
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...