Jump to content

Michigan


OUMike

Recommended Posts

Posted

So..how about them App. State Mountaineers?

 

Anyone think Lloyd Carr will be back next year? Not me. Only way he comes is if they run the table and win the Rose Bowl.

Posted
So..how about them App. State Mountaineers?

 

Anyone think Lloyd Carr will be back next year? Not me. Only way he comes is if they run the table and win the Rose Bowl.

 

Agreed. And keep in mind this isn't the NFL where you can drop your first few games, and have a shot at a championship by virture of a playoff. To even have a shot they need to run the table AND have some help from other folks.

 

-Jay

  • 2 weeks later...
Posted

I don't think there is any way Lloyd Carr will be back, Les Miles will be the coach next year up there. He has a clause in his contract that says he can leave LSU for only one school and that school is Michigan. The game has passed up Lloyd Carr, and much of the other coaches in the Big 10.

Posted
I don't think there is any way Lloyd Carr will be back, Les Miles will be the coach next year up there. He has a clause in his contract that says he can leave LSU for only one school and that school is Michigan. The game has passed up Lloyd Carr, and much of the other coaches in the Big 10.

You hit the nail on the head.

Posted
I don't think there is any way Lloyd Carr will be back, Les Miles will be the coach next year up there. He has a clause in his contract that says he can leave LSU for only one school and that school is Michigan. The game has passed up Lloyd Carr, and much of the other coaches in the Big 10.

 

 

Some of the 80 year olds can still get the job done. The problems isn't Carr, the kids think hey we're Michigan who can beat us? After the beating they took the first week Oregeon knew they would be tough so they played extra hard to get ahead. I think that's why they went for the 2 point conversion in the first quarter. deflate Michigan's balloon early and then continue to hand it to them. They'll win this wekend but M. State will play a tough came and only lose by a few points.

Posted
So..how about them App. State Mountaineers?

 

Anyone think Lloyd Carr will be back next year? Not me. Only way he comes is if they run the table and win the Rose Bowl.

 

I've been wanting Lloyd gone since last years piss poor showing at the Rose Bowl. There is no way USC should have beaten Big Blue. NO EFFin' way!!!

Archived

This topic is now archived and is closed to further replies.

  • Latest Articles

  • Posts

    • Are you using a weight distribution hitch system with your trailer as that alone can change the actual tire pressure requirements needed. It would prove interesting to see what the actual individual axle weights are on your truck when you are hooked up to the trailer. In fact when your hooked to the trailer, typically if anything unless it has a large capacity weight distribution system that is over cranked, often the weight on the front axle will be less when hooked up vs driving empty and certainly if one doesn't have a weight distribution hitch. Really the only times one may get up there with weight on the steer axle is if there was a snow plow mounted on the front or a motorcycle on a rack or with a very large jockey tank full of fuel at the front of the box that transfers a bit of its weight to the front axle.    And of course your tires carry more weight for a given tire pressure due to their size vs a stock sized tire so there is that to take into the equation as well. 
    • Great info here thank you. I just joined, we have a 2014 Silverado truck we bought about 4 years ago with less than 5,000 miles on it. It has approximately 24,000 on it now. It appears to have all the standard issues that people are talking about. Occasional charging problems especially using 110 volt, occasional blinking triangle where nothing will turn on when first starting the truck but it will reset itself if you wait 10 to 15 minutes. Noisy coupler between the flywheel and the generator. Our truck is speed limited to 74 mph, is there any way to change that? The latest issue we have been dealing with is when driving long distance on the highway at full speed the generator does not keep the batteries charged. The meter will go into the yellow/red border Zone for charge status and the yellow triangle will illuminate solid but the generator will not keep the battery charged, not sure why the controller doesn't tell the gas engine to increase RPM to increase generator output it usually stays well below 25 kilowatts even though the battery is discharging and I have to slow down the highway to 45 mph and eventually pull over and let the truck idle to charge the battery so I can continue driving at speed. Has anyone had this issue before or have any idea how to diagnosed it? When via Motors was around it they were very helpful at troubleshooting. This becomes much if the Terrain is hilly and you're towing a small trailer
    • I have the GMC accessory (REV) cover installed by dealer. Ordered with the truck.  They did a very good install job, can't find a single issue. Some water gets in around the tailgate but no where else.  You can see daylight around the tailgate but that's not the covers fault.  Installation is means everything. Guys at my dealer were seasoned pros, not inexperienced here today good tomorrow types, like many dealers employ for these jobs.   I don't mind paying for a professional job.    
    • Like others have said, they will all leak. Mainly at the corners.   I have owned several and the best has been my current one. Revolver x4
    • About 8 months after an alignment job by the dealer I started experiencing a pretty significant clunk in the front end on hard left hand turns usually parking lot speeds almost at lock.  Occasionally get the same on hard rights too.   Discovered that the lower control arm attachment bolts are TTY and only to be used for a single use. And then I found some evidence of a TSB that indicates you can over torque those fasteners to about 130 foot pounds.   Asked a local shop to investigate and they found 3 out of four bolts loose and retorqued.   I've ordered the MOOG    K100421 lower control arm bolt kit that is completely reusable and not TTY.    Is the 80 ft pounds a realistic number?  Anyone have experience with those bolts?
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...