Jump to content

Chevy 6.0 Cam

chvy2500hD

Recommended Posts

chvy2500hD New Member

chvy2500hD

Posted
Posted

i wana put a cam in my truck i just dont know which would be best, i dont want to have to get it tunned or nothin i just want a little more power an a nice lope.. any suggestions.. thanks

Wingnut Senior Enthusiast

Wingnut

Posted
Posted

You're going to HAVE to get a tune if you want a bigger cam. It'll run without it...But it'll run crappy and get horrible mileage.

txab Senior Enthusiast

txab

Posted
Posted
You're going to HAVE to get a tune if you want a bigger cam. It'll run without it...But it'll run crappy and get horrible mileage.

 

+1 If you want to get everything out of your new cam

Draenor Senior Enthusiast

Draenor

Posted
Posted
i wana put a cam in my truck i just dont know which would be best, i dont want to have to get it tunned or nothin i just want a little more power an a nice lope.. any suggestions.. thanks

More torque or horsepower? Where do you want it?

 

 

You're going to HAVE to get a tune if you want a bigger cam. It'll run without it...But it'll run crappy and get horrible mileage.
+1
66nova Senior Enthusiast

66nova

Posted
Posted

Why don't you want to get it tuned? A good tune by it self will net you a lot more than a cam without a tune. A good tune with a cam and you will have an animal.

VR021302 Senior Enthusiast

VR021302

Posted
Posted
Why don't you want to get it tuned? A good tune by it self will net you a lot more than a cam without a tune. A good tune with a cam and you will have an animal.

 

 

In that case Mr. Vet, what cam would do good in my truck? :lol:

66nova Senior Enthusiast

66nova

Posted
Posted
Why don't you want to get it tuned? A good tune by it self will net you a lot more than a cam without a tune. A good tune with a cam and you will have an animal.

 

 

In that case Mr. Vet, what cam would do good in my truck? :lol:

 

 

 

I refuse to give cam recommendations. If you look at any of my post, I will always direct you to the professionals...Comp, Lunati, etc. Way too many variables when picking a cam and I also don't recommend anyone picking a cam because someone on a internet forum or a buddy, buddies buddy, a guy that use to build engines, (get the point) said it would work.

 

There are some very good LS cam companys out there too. Also, when I say professionals, I do NOT mean a tech from summit or jegs.

chvy2500hD New Member

chvy2500hD

Posted
  • Author
Posted
Why don't you want to get it tuned? A good tune by it self will net you a lot more than a cam without a tune. A good tune with a cam and you will have an animal.

 

 

idk like i didnt want a huge cam so i was just seeing if there was a small one i could get bigger than stock that wouldnt really need to be tuned but i figured i would have to get it tuned anyways i was just askin around.

2000DV4.8 Senior Enthusiast

2000DV4.8

Posted
Posted
Why don't you want to get it tuned? A good tune by it self will net you a lot more than a cam without a tune. A good tune with a cam and you will have an animal.

 

 

idk like i didnt want a huge cam so i was just seeing if there was a small one i could get bigger than stock that wouldnt really need to be tuned but i figured i would have to get it tuned anyways i was just askin around.

 

 

Why wouldn't you want to get it tuned? :lol:

Archived

This topic is now archived and is closed to further replies.

Go to topic listing

  • Latest Articles

  • Posts

    • Atlas
      Wow I'm in a pickle. (Broke down truck) and a story.

      By Atlas · Posted

      Why don't I have a good scanner? I've always wanted one when I've needed one.   My latest reading says I don't need to do a relearn on the ckp sensor on a 1995 with OBD 1.5. The relearn is prescribed for the later-model 1995's which shipped with actual OBD II when GM completed the transition in prep for the 1996 MY. I need to confirm that. Did you know forums are disappearing? Knuckleheads on Facebook... it's not the same. It's just not.   So, scanners. Again, shooting myself in the foot for having eBayed my Snap On MT2500 "brick" with all the adapters. Not that I couldn't buy another but those are getting quite old, and mine wasn't new enough to work on 2000's vehicles.   Damn it (as I'm scanning my email between paragraphs here). Did you know there's a 2000 Jimmy 2-door on BaT that's ending this morning? It's local. I want it. 14k miles. Absolutely beautiful.   Back to scanners. MT2500's are old. Solus, now that could be a contender. There's a ~2008 Verus with a system error that's basically new in box for cheap. Hmm...I'm not sure about a scanner that runs an archaic version of windows (95 or CE, I can't tell).   I want the ability to reset and rotate TPMS, test individual modules, bleed ABS, electronic parking brake controls for servicing brakes, relearn procedures and other bidirectional controls.   Snap On does an MT2600. It's a new model as of last year, marketed as their "entry" scanner. Entry? Only where $1900 gets you through the doorway plus, I'm guessing, $1000/year if you wish to keep it current. So goes scan tools actually designed for production environments. Want decent products with excellent support, you pay for it.   Everyone is raving about Autels and TopDons and Foxconns and all these newer brands that are selling the $500 "prosumer" scanners for backyard hacks like me. They're tempting...honestly. Updates are cheaper, base prices are remarkably cheaper... And you get to deal with bugs and translation whoopsies and, well, just don't use it on anything expensive, OK? Having a dealer replace an ECU because it needs to be re-imaged after an adventure in scanning is no joke. But I think most people are getting by OK with these units.   eBay on a scratch-and-sniff pro-model oldie, a shiny new TopDon, or???   God dang it, I can't stop looking at this Jimmy. I'm ready! I'll Bring The TRailer! It's beautiful.
    • Texasdeere
      What have you done to your K2 today?

      By Texasdeere · Posted

      I removed the OE running boards.  It looked so much better.  I wish I took them off a long time ago.     I had to put something back on for my wife.  I wanted Westin Sure Grip Running Boards but they are very pricey, like $600 plus.  I was going to go with the Ionic 41's like I had on the 2019 Silverado but went with Westin Outlaw Drop Steps instead, about $200 cheaper.  They are sturdy and functional but not super crazy about the look, but it works.  
    • Atlas
      Gas Prices

      By Atlas · Posted

      It's all a crock of 💩
    • fondupot
      Disable DRL's

      By fondupot · Posted

      I had a Gen5DIY DRL relocate harness from a 2022 1500 that I saved. I had Gen5DIY modify the harness for my 2024 Silverado 2500. Plug n Play, worked perfectly.    Here's a video I made for the 2022 1500 truck. The install is more or less the same on a 2500.    The harness relocates the DRL tot he top amber turn signal on my 2500.     
    • CamGTP
      Gas Prices

      By CamGTP · Posted

      Can ask that about a lot of places.   Holiday sells 91 for $1 over 87 octane. BP 93 is 80 cents. Amoco 93 is 80 cents Kwik Trips is $1.20 for 92 or whatever they have and $1 for the 91.   I know that this is not exactly same as what you are saying with the premium to premium debate of those two stations but why is there such a difference. Top Tier this and that, it's all BS. All the fuel comes from the same damn refinery, so give me a break.

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...