Jump to content

Cooled Seat Conversion

louie730
 Share

Recommended Posts

  • 4 months later...
arad_na64 New Member

arad_na64

Posted
Posted

I`m Arad and need help for install two electrical front seat of 2007-2013 chevy tahoe or suburban or avalanche. I have some question about that and wiil be happy if some one can help me on this way.

1- Can I have wiring diagram of front seats? (picture attached) link of pictures: http://www.auctiva.com/hostedimages...,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0&format=0

2- I checked socket of seats and find two bigger wire(Red/white and black). I think main power wires are them. But when I connect 12v adapter to wires nothing happened and no movement.

3- I know the seats have many function. But I need anly movement and heat/cool function.

Thanks for reading my post.

Arad

P.s: sorry for my bad english

post-149162-0-41435200-1444467409_thumb.jpg

post-149162-0-89646400-1444467417_thumb.jpg

post-149162-0-40422900-1444467426_thumb.jpg

post-149162-0-41435200-1444467409_thumb.jpg

post-149162-0-89646400-1444467417_thumb.jpg

post-149162-0-40422900-1444467426_thumb.jpg

post-149162-0-41435200-1444467409_thumb.jpg

post-149162-0-89646400-1444467417_thumb.jpg

post-149162-0-40422900-1444467426_thumb.jpg

post-149162-0-41435200-1444467409_thumb.jpg

post-149162-0-89646400-1444467417_thumb.jpg

post-149162-0-40422900-1444467426_thumb.jpg

  • 4 months later...
Tnutt19 New Member

Tnutt19

Posted
Posted

Ok guys bumping this back up to the top. Anyone that can help I also need the diagrams for converting from heated to AC/ Heated.

I just received today the seats and both the memory and ac/heat modules. Any help to know what is needed next would be very much appreciated.

  • 4 months later...
ep224 Enthusiast

ep224

Posted
Posted

looks like this thing has died - but I would really like to get a hold of "rich22" to see what he offers in the way of instructions to do this... I am adding a cooled seat (driver only - at $1200 screw the passenger haha) to my 2013 suburban 2500... black leather is smoking hot.

dsr611 Senior Enthusiast

dsr611

Posted
Posted (edited)

looks like this thing has died - but I would really like to get a hold of "rich22" to see what he offers in the way of instructions to do this... I am adding a cooled seat (driver only - at $1200 screw the passenger haha) to my 2013 suburban 2500... black leather is smoking hot.

Here's his profile page...there's a link to send him a message on the page

Though, he hasn't been on here in almost a year

 

http://www.gm-trucks.com/forums/user/29983-rich22/

Edited by hammerhead611
ep224 Enthusiast

ep224

Posted
Posted

Still shoot him a message, he may happen to have the email alert on if he gets a message on here!

 

ok I PM'd "rich22" and I am holding my breath for a response. everything I have found online says you can do this - and I have talked to two (1 GM and 1 chev) parts counters (I know, I know) and they think I can do it too... I even have the seats lined up. a little hesitant to pull the trigger just yet until I get a green light from my GM mechanic... hopefully rich22 has his ears on!

  • 2 weeks later...
ep224 Enthusiast

ep224

Posted
Posted

well, still nothing from nobody that seems to have anything to add, but i'll keep going. i have a 2013 2500 suburban - KB6 wasn't an option. i have heated and airbag seats from factory. i have procured the identical seats with the addition of the cooling option as well as the door switches. i have identified that there are two wires from the truck (B10 and B11) in the truck-side harness (X303) that don't exist in my build from the factory that the new seats will need run. i am working on locating the schematics that will tell me where these wires come from...

 

any help would be GREATLY appreciated!

  • 1 year later...
paddonNZ New Member

paddonNZ

Posted
Posted

well, still nothing from nobody that seems to have anything to add, but i'll keep going. i have a 2013 2500 suburban - KB6 wasn't an option. i have heated and airbag seats from factory. i have procured the identical seats with the addition of the cooling option as well as the door switches. i have identified that there are two wires from the truck (B10 and B11) in the truck-side harness (X303) that don't exist in my build from the factory that the new seats will need run. i am working on locating the schematics that will tell me where these wires come from...

 

any help would be GREATLY appreciated!

 

Did you ever figure your seats out, i just got done installing mine in my 2007 silverado but i had to add about 10 or more extra wires to the passenger seat and about half that to the driver, i found all the diagrams i needed, which im going to add on here for other people in the future as i wasted a day sourcing through the wiring diagrams for the whole truck, just went to the dealer and reflashed the BCM with the vin from a 2009 tahoe but came up with faults and theft errors etc, must be cause the BCM has the incorrect vin number just wondering what the dealer has to do to program these in, they are unsure since its not something they have done before. hopefully someone out there can help. thanks

ep224 Enthusiast

ep224

Posted
Posted

 

Did you ever figure your seats out, i just got done installing mine in my 2007 silverado but i had to add about 10 or more extra wires to the passenger seat and about half that to the driver, i found all the diagrams i needed, which im going to add on here for other people in the future as i wasted a day sourcing through the wiring diagrams for the whole truck, just went to the dealer and reflashed the BCM with the vin from a 2009 tahoe but came up with faults and theft errors etc, must be cause the BCM has the incorrect vin number just wondering what the dealer has to do to program these in, they are unsure since its not something they have done before. hopefully someone out there can help. thanks

i have them installed but we haven't wired them. we were actually getting ready to do that this week. i am going to see if i can PM you...

  • 3 years later...
  • 1 year later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • Another JR
      PF63 Oil Filters Going Away?

      By Another JR · Posted

      I went to order some PF63 oil filters from an on line GM parts source, and the blue PF63 oil filters seem to be getting phased out. They show the new part number as 19363567, which is a black colored AC Delco Silver product apparently marked PF63A. Some sites show a part number 12693541, which is a black colored AC Delco Ultragard Gold filter marked UPF63R.    I assume the UPF63R is the better one, but I’d be happy if I could just get blue PF63 filters I’ve been using.    Can anyone explain what is going on with the filter part number changes and any actual design changes?  Any other advice on buying OEM filters right now?  Thanks 
    • davester
      HELP! DUMPING COOLANT

      By davester · Posted

      thanks for coming back and posting what the fix turned out to be.
    • Grumpy Bear
      Post your UOA, (used oil analysis) here

      By Grumpy Bear · Posted

      Only TAN I have for the product was at 5K in service miles and it was 2.71
    • SwitchBladeSierra
      HELP! DUMPING COOLANT

      By SwitchBladeSierra · Posted

      If anyone lands here looking for an update - the problem wasnt with the hose, the clamp, etc... I purchased a metal Thermostat housing that just must not of been made to spec. It just wouldn't plug up the hose.. Went back to a plastic cheap housing - leak fixed. Some plumbers tape carefully placed in tandem with a clamp likely would've gotten the job done.   Best,
    • SwitchBladeSierra
      AUX switch install

      By SwitchBladeSierra · Posted

      For anyone following, this is what I have deduced from this forum - and my very specific niche case. Please do let me know if you see me going in the wrong direction here. For context, I have a 16 sierra 1500 w/t. Has TC and Cargo light switches. Removed the switch to find the X1 and X2 of the S48A connection populated with wires (x1 10-14, and x2 1-5).   Took photos of the X61A-X5 to find the wires from S48A-X1 land here at their respective pins (10, 11, 17, 23 on the X5). Was hopeful that this means my X51A fuse box has the appropriate pins... No cigar. So now I will be routing wires from the rear of the X61A-X1 to the engine bay and to their respective negative relay triggers. Please see to the diagram. If any has insight as to where the S48A-X2 pins 4 and 5 land that would be awesome.   Will be attempting this sometime shortly and will likely make a youtube video out of it.   Note: please disregard fuse sizes. Main fuse will likely be 25A, all mini bus fuses will likely be 10-15A.   Here is my parts list: GM 84347199 - TC, Cargo Light, Exhaust Brake (useless to me unless I find a means to reconfigure), Aux 1 - 4. 12V 6 Way Pre-Wired Fuse Relay Box Kit with 4 x 40A 4-Pin Relays (link below - some mods required to make negative trigger)            https://www.amazon.ca/dp/B0F4KCS43B?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 Various wire sizes (12 AWG - red and black, 14 AWG, 16 AWG multi-colored bundle) Wire termination leads for X61A-X1 (unknown at this time) Crimp connectors/Soldering Gun Heat Shrink Split Wire Loom To be continued...    Cheers

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...