Jump to content

Speed Limiter 2008 Silverado 5.3


Recommended Posts

Posted

I had to get to work yesterday in a hurry, normally I would be in a car that speeding would not matter :thumbs: .....but anyway, I was on the freeway and at 91mph the truck nose's over and won't go any faster....even with my foot WFO.

 

 

Is this something a tune can fix, BTW.....the power trains in these trucks suck....allways acting confused and not giving the power when needed, freaking touqe managment

Posted

Get a Black Bear Tune, and your speed limiter will be gone. Your truck will be more responsive, the powertrain dosen't suck. My truck on a stock tune won't go over 92mph, but with my Black Bear Tune it will go over 120mph. What sucks is the factory tune so get in touch with Justin at Black Bear Performance, and he will make your truck drive like how it is supposed to drive.

Posted
Get a Black Bear Tune, and your speed limiter will be gone. Your truck will be more responsive, the powertrain dosen't suck. My truck on a stock tune won't go over 92mph, but with my Black Bear Tune it will go over 120mph. What sucks is the factory tune so get in touch with Justin at Black Bear Performance, and he will make your truck drive like how it is supposed to drive.

 

You need Black Bear my friend :thumbs:

Posted

the factory speed limiter is set for the speed rating of the tires installed on the vehicle.

 

all manufacturers do it this way, even my GF's new Audi we picked up last night acknowledges in the owner's manual that it has a speed cutoff of 130 mph (the speed rating for the factory H rated tires).

 

L 75 mph 120 km/h Off-Road & Light Truck Tires

M 81 mph 130 km/h

N 87 mph 140km/h Temporary Spare Tires

P 93 mph 150 km/h

Q 99 mph 160 km/h Studless & Studdable Winter Tires

R 106 mph 170 km/h H.D. Light Truck Tires

S 112 mph 180 km/h Family Sedans & Vans

T 118 mph 190 km/h Family Sedans & Vans

U 124 mph 200 km/h

H 130 mph 210 km/h Sport Sedans & Coupes

V 149 mph 240 km/h Sport Sedans, Coupes & Sports Cars

Posted
normally I would be in a car that speeding would not matter :P

 

Speeding ALWAYS matters, no matter what you are driving !!!!! :thumbs::eek: Leave for work earlier !!!!!

Posted
normally I would be in a car that speeding would not matter :P

 

Speeding ALWAYS matters, no matter what you are driving !!!!! :shakehead::lol: Leave for work earlier !!!!!

 

 

The funny part is, that unless you have to go 50 miles, the time you "save" by speeding is in the seconds range. Same for the running to the car, then running into the office. It just makes you feel better about being late. Now if he uses those seconds to find a cure for cancer, then I would say it was worth it.

Posted
the factory speed limiter is set for the speed rating of the tires installed on the vehicle.

 

L 75 mph 120 km/h Off-Road & Light Truck Tires

M 81 mph 130 km/h

N 87 mph 140km/h Temporary Spare Tires

P 93 mph 150 km/h

Q 99 mph 160 km/h Studless & Studdable Winter Tires

R 106 mph 170 km/h H.D. Light Truck Tires

S 112 mph 180 km/h Family Sedans & Vans

T 118 mph 190 km/h Family Sedans & Vans

U 124 mph 200 km/h

H 130 mph 210 km/h Sport Sedans & Coupes

V 149 mph 240 km/h Sport Sedans, Coupes & Sports Cars

 

 

 

Yup! Even tho you get a tune and your engine still wants to go 120 mph, your tires are probably not rated for it and you are risking a blowout at those speeds which could kill you and other Innocent people...

 

 

 

 

With that being said, my truck cuts out right around 95 :shakehead: It was a one time thing that i accidentally discovered... I was playing a little cat and mouse with another car and next thing i know it felt like i hit a brick wall cause the gas shut off and truck said NO MORE! Then i realized how fast i was going and backed the f off :lol:

Posted

I have my truck tuned...for 94 octane too...

I still have no idea what the speed limiter is set to....I told the guy doing the tune to just leave it alone.

 

It goes fast enough below 60MPH to get in trouble...

Posted

The speed limiter is set to 95MPH - get a Bullydog (or other handheld programmer) & you can raise it up to 135MPH.

Posted
The speed limiter is set to 95MPH - get a Bullydog (or other handheld programmer) & you can raise it up to 135MPH.

 

 

My Black Bear Tune could do that and more than any handheld programmer.

Posted

Tune if you need to go that fast...I would not worry about the tire nannys here...I ran my 67 69 72 goats 110 + and my friend's 70-71? hemi cuda 140+ on bias ply red lines...not near the tires we have now no matter the rating...

 

Now the handling of my large truck (even with bilsteins and good michelins) and stopping distance would slow me down but not the tires...if late often, recommend a Camaro, Stang or Chal...or a better alarm clock...

Archived

This topic is now archived and is closed to further replies.

  • Latest Articles

  • Posts

    • So after reading the reveal from Chevrolet, I kept asking myself...why did the trim levels change?   Here are the official ones:   Work Truck (WT): The quintessential fleet truck, built with durable, easy-to-clean interiors for commercial or utilitarian use. Custom: A stylish, road-oriented trim that adds a more refined appearance, standard dual exhaust, and modern exterior styling. Custom Trail Boss: An entry-level off-roader featuring a 2-inch factory suspension lift and 34-inch mud-terrain tires on a budget. Silverado: Serving as the new base consumer truck (replacing the previous LT trim), it comes standard with the Z71 off-road package when equipped with 4WD. Trail Boss: Steps up the off-road hardware with the 2-inch lift, 34-inch tires, monotube shocks, an exclusive off-road hood, and more premium interior options. ZR2: The flagship off-roader. It boasts 35-inch mud-terrain tires, Multimatic DSSV dampers, front and rear electronic lockers, forged carbon-fiber interior accents, and an available hardcore Bison Edition (co-developed with AEV). High Country: The pinnacle of luxury. It replaces bright chrome with modern satin chrome, 22-inch wheels, premium leather, real wood interior trim, a panoramic sunroof, and an exclusive front-passenger touchscreen. As others have stated, why would you want a Silverado - 'Silverado' - wth?? LT needs to remain!!!   Also, there will no longer be a dedicated Z71 model.  All 4x4 trucks will have the Z71 package. Carplay is also something that cannot be removed.  Hopefully it will remain.     I am excited about the 5.7L V8 (350 C.I.D.)  Old school Chevy power.  My only concern is whatever version of AFM/DFM cylinder deactivation.  Too bad that isn't an option a buyer can choose to have or not.   I will definitely be stopping by my local dealership when these trucks start showing up.
    • I haven't seen diesel for less than $5.30 anywhere in my area
    • The not as clean as one would assume theme with the new engine oil, that reminds me of comments over the years with mechanics not always being so on board with filling an oil filter, not from the center anyway due to that typically being the clean side of the filter, danger of some contaminant falling into the filter if not careful but the realization now that the oil may not be as pure as one had assumed it would surely be. Yes it would be possible to fill from the small holes but that means messing with something to prop open the anti drain back valve if the filter is so equipped and not damage that valve in the process. Me, I have hardly ever prefilled an engine oil filter however I have prefilled diesel fuel filters with a filter on a fuel bulk tank and for anyone that has messed with diesel engines with filters and units that have a limited or no way of priming them, putting on a dry filter is a bad day to say the least with those crappy systems. But anyway back to not so clean engine oil, indeed perhaps its not so bad after all that I have not made a practice of prefilling oil filters.    As Grumpy Bear commented on keeping things clean, that I really have to wonder what the typical practice is at a dealer or any other shop that changes engine oil, do they make sure to wipe or wash off the oil plug and certainly if it fell into some gunk or onto a dirty floor, or that they wiped the filter mounting flange and didn't go and use some dirty rag and end up adding dirt to the inside of the head of the filter mount. Or be careless in how they stored or handled the new filter and if they were bumping into items under the vehicle with the filter opening facing up and having dirt drop right into the filter and if so right into the threaded center that is on the clean side. The top side, did they clean away the built up gunk that may be around the filler before removing the cap or to be really careful at that point that something right close to the filler hole that was hidden under the caps flange won't fall into the engine. Or did they clean the funnel or was that just laying there covered in oil from the oil change before and dust kicked up from sweeping the floor stuck to the oil and now that will go running into the next persons engine due to just not cleaning the funnel as "they won't know anyway" attitude as that young guy is more worried about taking a break so he can go outside and smoke a joint. Just random points that came to mind when I think about what some hired personnel may do that the shop foreman has no idea of or perhaps the whole attitude of some shops may be "eh ... who cares, they will never know the difference anyway".  
    • $3.69 for 87 octane.   $4.24 for Diesel in town.
    • On the subject of OLM, Gm's OLM tool may be more "informed" than others brands. I recall OLM's in mid-2000's Chrysler products literally counting down a set number of miles. That's all the OLM appeared to be.    I would actually expect GM to be able to explain the parameters that their OLM takes into account from a high level. No, I would not expect them to disclose their software coding or data analysis around their parameters.   So we're talking about two different topics, so to continue the subject on the other one, I'd be curious to know how much "standard particulate matter" in fresh oil is able to be filtered at first start by a fresh oil filter. How much particulate matter is enough to "matter"?   I.e. how much of a "lever" do we think this equates to (variability in particulate content, in fresh oils, between different makes/brands, some which filter less, and some that filter more).   We can say that more particles = more wear = shorter engine life as a logical statement and use that data with a little marketing to scare people into selecting a more refined/filtered oil. Using a similie, is this like deciding to forego two alcoholic drinks in a lifetime because we're worried about the potential impact on lifespan? Are there numbers which translate the ISO test results into a quantifiable increase in wear for a given engine/use case?
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...