4x4 Dash Light Indicator

[bobbyboy327]

Have a 2006 Silverado , 5.3. push button 4 wd, when engaged in any 4 wd settings my indicators light does not come on, checked fuses, what do i need to ck next.

 

 

Thank you.

[bobbyboy327]

Have a 2006 Silverado , 5.3. push button 4 wd, when engaged in any 4 wd settings my indicators light does not come on, checked fuses, what do i need to ck next.

 

 

Thank you.

 

ok, well thank u any way.

[hrspwr]

Could be the switch itself?

[dsr611]

Have a 2006 Silverado , 5.3. push button 4 wd, when engaged in any 4 wd settings my indicators light does not come on, checked fuses, what do i need to ck next.

 

 

Thank you.

 

Bulb behind the indicator could have burned out.

[RaddHazzard]

Mine recently went out too, although I have manual floor shift. Four wheel still works, just no light. I also checked the fuses but they were fine.

[bobbyboy327]

Have a 2006 Silverado , 5.3. push button 4 wd, when engaged in any 4 wd settings my indicators light does not come on, checked fuses, what do i need to ck next.

 

 

Thank you.

 

Bulb behind the indicator could have burned out.

 

 

 

 

i am guessing it would be a pain to get too?

[Fallz]

I wish my 2011 has some type of indicator as to what mode your in . Its only on the little dial and not easy to see . Why didnt they put something on the dash/speedo area with all the other gadget lights .

[RockySierra]

Here is what a bunch of us did a few years back:

 

http://www.youtube.com/watch?v=M9zzPDK6sT4

 

http://www.gm-trucks.com/forums/index.php?...oto+Engineering

[1990ss]

Your talking about the lights on the switch itself, correct? I don't think they had any lights on the dash. I would say you would have to replace the switch.

[RockySierra]

The GMT 800s and 900s did not have lights in the dash, only on the switch, with the exception of the W/T models with the manual 4X4 lever on the floorboard, those had lights in the dashes.

[GMCanuck]

Have a 2006 Silverado , 5.3. push button 4 wd, when engaged in any 4 wd settings my indicators light does not come on, checked fuses, what do i need to ck next.

 

 

Thank you.

 

So here's a silly question (my truck has the same set-up - little indicator lights on the button itself)...

 

Does your 4wd actually engage, just the light doesn't come on? Maybe the light is a response to indicate the 4wd is actually engaged and yours isn't hooking up.

 

Just a thought.

[bobbyboy327]

Have a 2006 Silverado , 5.3. push button 4 wd, when engaged in any 4 wd settings my indicators light does not come on, checked fuses, what do i need to ck next.

 

 

Thank you.

 

So here's a silly question (my truck has the same set-up - little indicator lights on the button itself)...

 

Does your 4wd actually engage, just the light doesn't come on? Maybe the light is a response to indicate the 4wd is actually engaged and yours isn't hooking up.

 

Just a thought.

 

the 4x4 indicator on the dash, not the button, might just take it in.

[1990ss]

There isn't an indicator on the dash.

[RockySierra]

EXACTLY. You may see what you think should BE a light on the dash but there is no light behind it, there is no socket in the dash for that light. The only light is on the switch itself.

[cameron24v]

I have a floor shifted transfer case, 4x4 works, but the dash light that used to light up indicating the front axle is engaged does not come on now. Is there a sensor for this on the t-case??

 

Sent from my Nexus 7 using Tapatalk