Jump to content

Rust Warranty Apply To Wheels?

redjewel2ss

By redjewel2ss
in Tires, Wheels & TPMS

Recommended Posts

redjewel2ss Enthusiast

redjewel2ss

Posted
Posted

i have the factory chrome "clad" wheels on my truck. over the past year they have become pitted from the hard water coming out of my apt's sprinkler system. there are even a few rust spots on them. i've tried to clay bar and polish them off but it seems to be underneath the clear coat.

 

will GM honor the 6 year rust warranty on the wheels? or does it only apply to body parts?

Doug_Scott Senior Enthusiast

Doug_Scott

Posted
Posted
i have the factory chrome "clad" wheels on my truck. over the past year they have become pitted from the hard water coming out of my apt's sprinkler system. there are even a few rust spots on them. i've tried to clay bar and polish them off but it seems to be underneath the clear coat.

 

will GM honor the 6 year rust warranty on the wheels? or does it only apply to body parts?

 

GM fixed the wheels on my GrandAm a few years ago. They were the chrome clad wheels, and the wheel under the chrome covers were aluminum wheels. The alum was corroding from underneath the chrome covers, and looking like crap. GM paid for all the wheels to be polished, and then coated with some stuff that stopped the corrosion. That was when the car was in its 3rd winter.

newdude Senior Enthusiast

newdude

Posted
Posted
i have the factory chrome "clad" wheels on my truck. over the past year they have become pitted from the hard water coming out of my apt's sprinkler system. there are even a few rust spots on them. i've tried to clay bar and polish them off but it seems to be underneath the clear coat.

 

will GM honor the 6 year rust warranty on the wheels? or does it only apply to body parts?

 

 

I think, think, wheels are covered under the 3yr/36k? I know where I work we have done a good handfull of chrome clad 20" wheels on I think 2009, and 2010 trucks under warranty.

 

I would check with your dealer to be sure. Owners manual might have description on warranty as well.

Archived

This topic is now archived and is closed to further replies.

Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Forum Statistics

    250.4k
    Total Topics
    2.7m
    Total Posts

  • Member Statistics

    342,791
    Total Members
    8,960
    Most Online
    d.lowrey
    Newest Member
    d.lowrey
    Joined

  • Who's Online   2 Members, 1 Anonymous, 3,233 Guests (See full list)

  • Latest Articles

  • Posts

    • Grumpy Bear
      J&L OIL SEPARATOR CO

      By Grumpy Bear · Posted

      Just did an injector/HPFP replacement on Pepper at 192,400 miles; close enough to 200K, RIGHT? (If 200K is considered life end and to me it isn't). But hey, to each his own.    Have never run a catch can on this vehicle. Back side of every valve looked like a new valve spray painted semigloss black. Port walls looked 'neat' (all a normal result of passive EGR via VVT) Zero build up even in AFM cylinders. Just color. It uses no measurable oil and never has.    At 155,000 I put her on E-85 and a borescope of the cylinders at plug change showed very clean pistons and valve faces. The replaced injector tips looked new. (It was the pump piston seal that was leaking). Oh well, have six good backups.    Still gets 28 mpg on gas (highway average) and over 20 (highway) on alky. UOA's look good and runs as good now as it did when I bought it. Better in fact.    What improvement would a Catch Can provide this motor?     And given all this I expect that IF I installed one I'd see some water/gas/oil vapor accumulation. Byproducts of normal combustion.   Having said that, IF my motor used an appreciable amount of oil I'd consider it a useful 'crutch' until I had the situation corrected OR if bore polished, until I junked it or rebuilt it to stave off repeated plug fouling.    I'm not telling you what I THINK. But what its DONE.          
    • Grumpy Bear
      Starting a new thread regarding mounting my 2014 OEM wheels to my 2026

      By Grumpy Bear · Posted

      Love the look. I'm a SCSB lover myself.    Two items. 1.) A spacer changes scrub radius but this also changes when we use wheels of different offsets. A little isn't a big deal. 2.) Steel wheels, alloy wheels all have different thickness. Same effect on the stud and lug nut as a spacer. When hub centric the wheel isn't supported by the stud. It's supported by the hub. The stud just keeps it all together.  
    • JAI3
      2016 Sierra 5.3L L83 new injectors now runs rich.

      By JAI3 · Posted

      I had a evap sol go bad a couple weeks ago. . I replaced it.  While watching live data at the time I saw I had some cylinder 1 misfires. No MIL but on live data I could see ~50 at startup and about 70 more after an hour a drive all on cyl 1.  I also noticed that the LTFT were -5% to -15% always.  And that bank 2 is always -3% richer than bank 1. Even across all driving modes, city, highway, etc it’s always 3% richer than bank 1. So I start with the misfire. Swapped coil, plug, and plug wires from 1 to 3. No follow. I got an Injector reseal kit, pulled the D/s injector rail, swapped #1 and #3 injectors, resealed them, reinstalled and retested.  The misfire followed to 3. So I ordered and replaced all 8 injectors, spark plugs, and plug wires. Also replaced the 1 time use fuel pipes under the intake manifold.  Injectors that were in the truck since new were  Part # 12668390.  I replaced them with # 12742701 Got from RockAuto. Pretty certain they’re genuine and the correct ones. I called a friend at a parts store who told me “the 12742701 were the correct superseded part # for the originals I was replacing”. So started truck after replacing all that and it’s running -15 - -30 LTFTs. I reset the fuel trims with GDS2 and drove it for a 60 miles trip each way. There have been no changes in the LTFTs.  I checked if the HPFP was leaking into the crankcase. I removed the pvc and watched the trims. No difference.  I checked the alcohol content and it was at 10%  I’m out of ideas here. Truck seems to run great. Just always rich on the fuel trims.  Anyone with any help or ideas would be greatly appreciated.  I ran an injector balance test just for the heck of it and it came back this. I’m confused.  I have gds2 and some other diag tools if anyone knows of anything I should test next.
    • Coastie05
      Will not stay in Reverse

      By Coastie05 · Posted

      Definitely needs to go back to the dealer. 
    • Grumpy Bear
      Wow I'm in a pickle. (Broke down truck) and a story.

      By Grumpy Bear · Posted

      No, but don't skimp on safe! 😉 

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...