6.2L (L9H) Owners - Get all your questions answered here

[RyanbabZ71]

I need some help, so many tuners to choose from and I want the one that gives me the most bang for my buck. I have a 2011 GMC Denali with the 6.2 any suggestions on which ones are the best ones for the motor. I want longevity out of my truck but I also want to add some horse power and fuel economy.

 

http://www.blackbearperformance.com/

[SILVERADOSC540]

^ +1

Edited August 26, 2013 by SILVERADOSC540

[ChevyTech77]

Denali's got the L94 6.2 which DOES have AFM.

What about the 2013? has it got AFM?

 

Not the L9H pickup truck engine.

[Jtlindenmeier]

Hello everyone,

I am new to the site so bear with me. I have a question but don't know if this is the right place to ask it. So hear goes... I have a 99 tahoe 5.7 v8 should I have lateral movement on any of the pulleys?

[wazowski77]

http://www.blackbearperformance.com/

 

I was going to ask the same question. rensently got a new to me 11' Sierra with the Z71 pakage. it came with Banks cold air intake and TB spacer. I just added a flow master and was looking into the superchips programer but didnt convince me 100%. is this BB programer the one that works best for this type of truck?

 

[dgrinnell]

I was going to ask the same question. rensently got a new to me 11' Sierra with the Z71 pakage. it came with Banks cold air intake and TB spacer. I just added a flow master and was looking into the superchips programer but didnt convince me 100%. is this BB programer the one that works best for this type of truck?

 

BB is the only way to go, its a custom tune and not just a programmer. For the price BB is hard to beat.

[401 YJ]

Just thought I would post after I picked up my 2013 6.2 Sierra. I am finally part of the club. I traded in my almost identical 2012 5.3 Sierra to get it. This thread helped make the decision for me. Well actually this thread and trying to keep up with another truck with a 6.2 pulling a Jeep on a car hauler. I was pulling almost an identical load with my 5.3 and it was amazing how much difference there was in power. There was also less then a mile per gallon difference in fuel economy between the 2 trucks over a 2500 mile trip from Illinois to Colorado and back. Both had 3.42 gears and 6spd trannies.

 

The best part I was able to pull out the dealership and fish tale the new truck with no trouble. Can you believe my wife says I am like a big kid.

 

Thanks for all of the info guys!

[SILVERADOSC540]

Congrats on the new truck, and the new horsepower.

[Edgecrusher09]

I have a quick question. I recently purchased a 13 z71 with the 6.2 and 4x4. I freaking love it. But sometimes when I stomp on it it sounds like it "hiccups" between shifts, usually from either 2-3 or from 1-2. This is not a "hard" shift, its like the engine stops for a millisecond and the truck lags until shift is complete. Any ideas what this is? I only have 2800 miles and I don't want to worth about a truck so new..

[Daryl LBZ]

I have a quick question. I recently purchased a 13 z71 with the 6.2 and 4x4. I freaking love it. But sometimes when I stomp on it it sounds like it "hiccups" between shifts, usually from either 2-3 or from 1-2. This is not a "hard" shift, its like the engine stops for a millisecond and the truck lags until shift is complete. Any ideas what this is? I only have 2800 miles and I don't want to worth about a truck so new..

 

Mine does this exact same thing. I assumed it had something to do with torque management...

 

Edited September 18, 2013 by Daryl NHT

[palomal94]

i love my 6.2 but i had always noticed that when on idle it is rough. i cant feel it in the cab but when i see the engine under the hood it looks like it wants to jump out. is there something wrong with mine ??

[Wolfmanjohn]

Mine does this exact same thing. I assumed it had something to do with torque management...

 

 

I believe it does. If I understand things correctly (from my '04 'Vette), the PCM retards engine spark timing for the duration of the shift to lessen the load on the transmission internals. I also think tuning will remove/moderate that.

[savillian]

i love my 6.2 but i had always noticed that when on idle it is rough. i cant feel it in the cab but when i see the engine under the hood it looks like it wants to jump out. is there something wrong with mine ??

 

Mine does the same. I can def feel mine in the cab, I like it, puts a smile on my face!

[SilveradoX2]

 

I have a quick question. I recently purchased a 13 z71 with the 6.2 and 4x4. I freaking love it. But sometimes when I stomp on it it sounds like it "hiccups" between shifts, usually from either 2-3 or from 1-2. This is not a "hard" shift, its like the engine stops for a millisecond and the truck lags until shift is complete. Any ideas what this is? I only have 2800 miles and I don't want to worth about a truck so new..

I read on this thread or another on this forum about putting the shifter in M and leaving it for smoother transmission action. I have and I agree. I also like to manually shift to let that "Corvette" motor sing to me.

Edited October 7, 2013 by SilveradoX2

[mymaggiebell]

I read on this thread or another on this forum about putting the shifter in M and leaving it for smoother transmission action. I have and I agree. I also like to manually shift to let that "Corvette" motor sing to me.

u guys will have to get it tuned out. the "it" is torque management. also, while it is a 6.2l motor, it is not a "corvette" motor, just to be p.c.