Jump to content

Recommended Posts

Posted

no... I got the AT color matched bumpers without the step. I just can't used to the step on the bumpers yet. But on the flip side... all the color bumpers may be too much "color"

 

this is what I ordered..

post-40036-0-25298600-1373415060_thumb.jpg

post-40036-0-23063400-1373415061_thumb.jpg

post-40036-0-25298600-1373415060_thumb.jpg

post-40036-0-23063400-1373415061_thumb.jpg

post-40036-0-25298600-1373415060_thumb.jpg

post-40036-0-23063400-1373415061_thumb.jpg

post-40036-0-25298600-1373415060_thumb.jpg

post-40036-0-23063400-1373415061_thumb.jpg

Posted (edited)

I went to the dealership this evening and looked at all the colors. I was really focused on the Summit white, quicksilver metallic, and Iridium Metallic. I must say all looked great, but for me (One who keeps a vehicle for 8+ years) I really want to get the color I can live with the longest. That led me to going with the Summit White. The Fire Red, looked amazing too, but I may get tired of that red. Iridium would look the best clean IMO, but for me keeping it clean would be tough. I currently own Silver, so I won't go back for fact I wanna try something new.

 

I use to have a white 2 Dr. Chevy blazer with chrome wheels and I loved it.

 

I'm waiting to pull the trigger on the 2014 Sierra, SLT, 4WD, White, Standard bed, with dark interior, 20"Chrome wheels, and power sunroof.

Edited by WhiteMike
Posted

I went to the dealership this evening and looked at all the colors. I was really focused on the Summit white, quicksilver metallic, and Iridium Metallic. I must say all looked great, but for me (One who keeps a vehicle for 8+ years) I really want to get the color I can live with the longest. That led me to going with the Summit White. The Fire Red, looked amazing too, but I may get tired of that red. Iridium would look the best clean IMO, but for me keeping it clean would be tough. I currently own Silver, so I won't go back for fact I wanna try something new.

 

I use to have a white 2 Dr. Chevy blazer with chrome wheels and I loved it.

 

I'm waiting to pull the trigger on the 2014 Sierra, SLT, 4WD, White, Standard bed, with dark interior, 20"Chrome wheels, and power sunroof.

 

Hi WhiteMike,

You can't go wrong with white, its easier to keep clean, hides dirt better than dark colors, and seems to last better in the sun compared to darker colors. Don't get me wrong, i like dark colors but hate trying to keep them clean and free of superficial scratches. Hell, when I buy a '15 (6.2 & 8-speed) :fingersx: I will be keeping it for a loooooonnnnnng time.

Posted

Yep, I second the feelings on white. My first truck was a '95 Chevy K1500 Z71 in white...with a blue interior. Had a white '03 Trailblazer after that, '08 Silver Birch Silvy, then most recently a '11 white Camaro. Honestly, I almost bought a white LTZ Z71 loaded '14 Silvy then really took a shine to the truck I bought. But...I decided to lease this go-round as I'm afraid the dark color may wear on me allowing me to get back into something white in a few years.

Posted

I keep going back and forth on Quicksliver and Iridium Metallic .. Pro's and Con's ... darker always looks better clean. Lighter colors will hide everything. I figured Iridium Metallic... I don't drive that much, have no kids beating the hell out of it, etc.. pretty sure it will stay somewhat clean.

Posted
I keep going back and forth on Quicksliver and Iridium Metallic .. Pro's and Con's ... darker always looks better clean. Lighter colors will hide everything. I figured Iridium Metallic... I don't drive that much, have no kids beating the hell out of it, etc.. pretty sure it will stay somewhat clean.

Iridium metallic by far probably looks the best clean, but my silver hides alot. Not near as much time trying to get rid of water spots and swirls.

  • 2 months later...
Posted

RHTSooner & 07-Z71 - thanks for the great pics and info!

I just placed my own order for a double cab SLT AT w/chrome bumpers in Iridium. Now i find myself agonizing over whether i should have gone for the body colored bumpers. As you've each had yours for a little while, I wanted to ask your thoughts.

RHT - any regrets on getting the chrome bumpers over the body color?

7Z71 - any regrets on getting the body colored bumpers over the chrome?

If you had it to do over, would you do it differently?

Posted

Have a week old Iridium SLT texas Edition Z71 and it is awesome. It can look dark brown to black depending on how the light hits it. I have chrome bumpers and Cocoa Dune. Sould not be any happier.

Posted (edited)

Iridium Metallic is one of the few, I'm thinking about getting.
instead of black, I don't lke white, too boring along with silver too.

Edited by STINSAN3
Posted

RHTSooner & 07-Z71 - thanks for the great pics and info!

I just placed my own order for a double cab SLT AT w/chrome bumpers in Iridium. Now i find myself agonizing over whether i should have gone for the body colored bumpers. As you've each had yours for a little while, I wanted to ask your thoughts.

RHT - any regrets on getting the chrome bumpers over the body color?

7Z71 - any regrets on getting the body colored bumpers over the chrome?

If you had it to do over, would you do it differently?

No regrets, whatsoever, but I specifically wanted chrome bumpers. There was simply no way I would want to deal with the road rash on a painted bumper and I've made use of the steps in the rear more times than I can count now....okay, 36. :)

Posted

I have the Iridium Double Cab All Terrain with colored bumpers - (same truck in the pics above)

My thoughts -

 

The colored bumpers / grill looks better especially in the darker colors like Iridium. However, you will get more rocks chips, etc with everything being painted up front vs having chrome.

 

For the all terrain - I think if you have the color all terrain grill... the colored matched bumpers just look better.

Posted

Obviously GMC-AT and I look at things a bit differently but there's some mutual respect between the chrome/no chrome camps. GMC...I think you had tried the 3M paint defender with similar results as me. Utter junk. You may be well served in the long run going with some paint protection film. I've had it on my last three vehicles and just got the entire front end, sans-lower bumper, covered last week. That'll really help with road rash on your painted surfaces. I would estimate around $800 for your hood, fenders, upper and lower bumper. If you go that try to get them to throw in the door cups and door edge guards. Usually they'll have enough excess to fit those in to the sheet. I haven't been able to get the painted grille surround done yet but my guy said the template should be updated in the next couple of weeks to include that piece.

Posted

Your right... that 3m was junk... it came off a few days after. I just decided to keep a good coat of wax up front... and don't follow other cars too closely on the highway. Then again.. I only drive about 10K per year.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,921
    Total Members
    8,960
    Most Online
    Enduro73
    Newest Member
    Enduro73
    Joined
  • Who's Online   5 Members, 1 Anonymous, 1,387 Guests (See full list)


  • Latest Articles

  • Posts

    • While waiting for parts I have been working on installing the AC compressor, new accumulator, and orifice tube. Also changed out the high side ball valve (original). The orifice tube that was in there wasn't too bad. Slightly dirty, a little bit of junk, but not blocked. Glad I changed it out.   The accumulator, which should have been a 5 minute job, may have just burned $50. Put some PAG in it, wrote the date and mileage on the side, fresh o-rings and gooey'd up the threads and rings with Nylog. Got everything connected and snugged and was going to vacuum down the system, and....   My manifold gauge won't fit on the port. It's not an R12 service port. It LOOKS like an R134 service port but the diameter is a hair too large. There's a sticker on the accumulator that says it's designed to be used with R12 and R134a systems only. So it's not R1234yf. Even if I reduced the diameter slightly with a file, the shoulder on the port is too large so the quick-connect valve won't lock on. I'm stumped. It's going back, and 50/50 on if they'll give me a refund.   Also, I did a fuel pressure test.... Key on, the gauge spikes to about 60psi and quickly bleeds off, like 2psi per second. The fuel isn't going into the plenum, no smell, starts fine, so I'm guessing there's a bad check valve in the pump and the fuel is just draining back into the tank. oh, hell. But, it shouldn't be a problem, pump primes just fine and the truck starts right up. It just means I can't really ever use fuel pressure to verify a leak at the injector or intake.
    • Got this yesterday out of nowhere. Truck is a 25',6.6 gasser with 8k miles.  Only semi anomaly is that the truck had been sitting, uncranked for 6 days. Elec Stability Control showed immediately upon cranking, not while driving. No drivability issues, just the message. Battery didn't seem to be weak when cranking over.  I drove it, killed it, let it sit a few hrs with no avail.  Truck is 100% stock. No damage. 
    • This can be done.  It is not cheap and requires an instrument cluster swap with custom programming, new steering wheel with the controls on it, and a special jumper harness.   The cluster upgrade - 12.3” Digital Cluster Upgrade – 2022.5–2026 Silverado / Sierra (T1 Refresh Pickup) - WAMS   The wheel upgrade - Steering Wheel Upgrade Kit – 2022.5–2026 Silverado / Sierra (T1 Refresh Pickup) - WAMS   The column harness upgrade - 2019 - 2026 Silverado / Sierra: Steering Wheel LIN Bus Harness - Harness Dr. - DIY Done Right     The problem with doing all of this?  You pretty much can't have any programming done to your truck that involves the cluster ever again.  The dealer won't be able to program the cluster as GM's system will only pull data for the cluster the truck came with.  So it would be advised also to turn off over the air updates.   TLDR;  Should have bought an LT double cab?  You'd have a power seat, the wheel controls, the cluster, all things that you've been seeking in your various posts so far about your new WT regular cab.  
    • I was unaware of that, thanks for updating me.
    • Yes.  The 2.7 Turbomax has Active Fuel Management.  It is NOT the same as the V8s.  Totally different system.     Here is an article from GM when the 2.7 came out explaining the cylinder deactivation and the valve lift system.  Starts at the section called "SCS Valvetrain":   New Turbocharged 2.7L 4-Cylinder Engine Powers Full-Size Trucks – TechLink         This is an internet myth going around.  It was alleged that some 5.3s had this mystical 8th digit of the VIN as an "E" which somehow meant it had a new one year only 5.3 that didn't have DFM.  The writer of said article and the person that made the claim conveniently can't count because they posted the VIN.  The 8th digit was a "D" which meant its still the 5.3 with DFM.  The 9th digit of the VIN was an "E" and the 9th digit isn't the engine code.  At all.  
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...