Jump to content

Recommended Posts

Posted
5 minutes ago, Steven York said:

 


What brand? How do you like the lights? Specs on the lift?


Sent from my iPhone using Tapatalk

 

Rough Country Grill with 30 inch light bar. I think it was $500 with the light. 7.5 RC inch suspension lift, RC Vertex Coil overs,  RC traction bars and RC skid plate. Also AMP research XL power steps. 

 

The grill light is bad A**. 

Posted
5 minutes ago, Frankielozano214 said:

That looks clean what size lift is that 

7.5 inch RC with coilovers 

  • Like 1
Posted
5 minutes ago, BAUBOY said:

Rough Country Grill with 30 inch light bar. I think it was $500 with the light. 7.5 RC inch suspension lift, RC Vertex Coil overs,  RC traction bars and RC skid plate. Also AMP research XL power steps. 

 

The grill light is bad A**. 

Damn that’s what I wanna do to my truck lift it alil higher 

Posted
6 minutes ago, Frankielozano214 said:

That looks clean what size lift is that 

That pic in on a slight hill. This one is on level ground.

New pic 7.5 - 2.jpg

  • Like 1
Posted
6 minutes ago, BAUBOY said:

That pic in on a slight hill. This one is on level ground.

New pic 7.5 - 2.jpg

Man that’s a badass truck, what size wheel and tires? Im currently on 20in with 33s

Posted
5 minutes ago, Frankielozano214 said:

Man that’s a badass truck, what size wheel and tires? Im currently on 20in with 33s

Fuel D611 (Stroke) 20x10 - 18 offset on 35x12.50-20 TOYO RT's

Posted
7.5 inch RC with coilovers 


How many miles on the RC coilovers? How do you like them? I looked at them hard, but
Couldn’t find many reviews so started looking at eibachs


Sent from my iPhone using Tapatalk
Posted
5 minutes ago, Steven York said:

 


How many miles on the RC coilovers? How do you like them? I looked at them hard, but
Couldn’t find many reviews so started looking at eibachs


Sent from my iPhone using Tapatalk

 

RC just started making coilovers and honestly, It made the truck drive completely different. It rides a ton better. These just came out a few months back and I only have about 2K on them. They are made super heavy duty. best bang for $1000 bucks

Posted
9 minutes ago, BAUBOY said:

Fuel D611 (Stroke) 20x10 - 18 offset on 35x12.50-20 TOYO RT's

I might be good just doing the lift and getting 35s wasn’t sure if I wanted to go with some 22x10 but after lookin at yours I think I’ll stay with the 20s I have and buy 35s

Posted
RC just started making coilovers and honestly, It made the truck drive completely different. It rides a ton better. These just came out a few months back and I only have about 2K on them. They are made super heavy duty. best bang for $1000 bucks


They looked strong, would be interested in seeing them compared to eibach and fox 2.0s. Eibachs are only about $600


Sent from my iPhone using Tapatalk
Posted

35 are hard to clear on GMC's with that square fender well. The actual suspension lift is 6 inch (didn't clear the 35's cleanly) but the coilovers adjust to 7.5 inch so when I cranked them up, they cleared with zero rubbing. 

  • Like 1
Posted
9 hours ago, Steven York said:

 


That’s almost exactly what I’m hoping to end up with. The bumper, topper, wheels, all of it (with maybe a little more lift). Great looking truck.


Sent from my iPhone using Tapatalk

 

Thank you.  I don’t have a lift, only a front level... and the tires are about as large as I could put on stock rims without more lift and/or spacers...(285/65r18) I have been very happy with the look...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.4k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,760
    Total Members
    8,960
    Most Online
    MASONV88888888
    Newest Member
    MASONV88888888
    Joined
  • Who's Online   1 Member, 0 Anonymous, 1,434 Guests (See full list)


  • Latest Articles

  • Posts

    • My 2025 Silverado 1500 had to receive a brand-new engine (long block) under warranty last month at only around 16,500 miles. Before the replacement, the truck repeatedly displayed "Engine Oil Level Low" warnings, even though the Oil Life Monitor still showed around 50% remaining after about 6,000 miles since my last oil change. After seeing the warning several times, I checked the dipstick with the engine cold, and the oil level was completely normal. The next day, the message escalated to "Add Engine Oil." At first, I assumed it was just a faulty oil level sensor, so I brought the truck to the dealership. After inspecting the engine, they found internal cylinder wall scoring and ultimately replaced the entire long block under warranty. Before this happened, I was planning to install a 4-inch lift and suspension upgrade on my truck. After needing a new engine at just 16,500 miles, I honestly don't see the point anymore. I also contacted GM to ask whether my vehicle qualified for a buyback, but I was informed that it does not at this time. Anyway, this experience has left me with serious concerns about the long-term reliability of this engine. I sincerely hope NHTSA expands the current investigation or recall to include 2025 model and performs a thorough inspection of affected vehicles. My biggest concern is that these engines may fail shortly after the powertrain warranty expires. If GM truly stands behind this engine, then at the very least, please consider extending the powertrain warranty to 10 years for affected owners. That would go a long way toward restoring customer confidence.
    • Without exception but then I'm the odd duck, right? I know what goes into that test, how it is calculated and thus how to beat it. But EPA values are often not beaten by the general public and the government has in past years adjusted the means and methods to come to those values to more closely approximate "Joe Average".    The only real trick to beating that EPA average is don't drive like "Joe Average".    It's the same method you used to profit from "Economic Migration" and in doing so beat the 'stats'. But you, like me, are not "Joe Average".     The thing you don't seem to grasp is this "Purchasing Power Index" isn't forward looking. It doesn't predict what it going to be but looks backward and states what it was. They are not telling us what the THINK, they are telling us what they MEASURED. Example:    Wife says "I'm going to lose 40 pounds by Christmas". May she does, maybe she doesn't but the doctors office who weighed her when she made that statement and again at Christmas only REPORTS what the RESULT was. You and I can banter about what was possible and what aunt Tilly did till the cows come home but the result is the result. Arguing otherwise is.....irrational. That's all I'm saying. This isn't about:      What you are calling a 'Statistic' is a RESULT not a CALCUATION and as a result the RULE. Like gravity as a rule, it can not be broken. 
    • Just wanted to say thank you for posting this. Years later, your thread is still helping Silverado owners.   I bought my 2025 Silverado 1500 in January 2025, and I've had what feels like the exact same rattle since day one. After reading your findings, I believe my truck has the same issue with the cable carrier contacting the rear sliding window. To be honest, I had pretty much given up on pursuing the issue. It wasn't until I recently drove another brand's pickup that I realized just how quiet their cabin was—and how noisy mine has been all along. On my truck, the rattle happens on almost any paved road, gets even worse on rougher pavement, and I can even hear it during braking and acceleration.   I actually referenced your thread when submitting my case to GM, hoping they'll recognize this as a recurring issue instead of treating it as an isolated incident. The reason I reached out to GM first is because my dealership told me they would need to keep the truck for at least two days just to diagnose the problem. I was concerned that even after two days, they still might not be able to identify the source of the rattle before giving the truck back to me. I had also asked a few dealerships about this issue during previous service visits, but none of them seemed to know what was causing it or had a solution. That's why I decided to contact GM directly first, hoping they might already have an official repair procedure or guidance for this issue.   I also hope GM eventually comes up with an official fix for this problem. I have a feeling there are many Silverado owners experiencing the same rattle, but most either choose to live with it or simply don't know what the cause is.   Really appreciate you taking the time to document your diagnosis. Your post is still making a difference years later.
    • I have 2 choices. 
    • Do you have access to BP fuels? Some stations have Silver 91 E-0 priced the same as their 93 E-10.  There is a local Marathon with 90 alky free for $6 a gallon but I go down the road to BP for $5-ish. They also have a 100 E-0 but that stuff is $10 a pop. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...