Hypertech confusion?

[02suburbanZ71]

My hypertech allows me to increase my shift points by +100,+200,+300,+400,+500. How do i know what RPM it will shift at with these numbers. I would like to shift at 6100 so what should I increase it by?

[Hypertech]

stock shift point is 5600 and put it at +500 and you should shift where you want to. You will have to bump up the rpm limiter all the way as well to keep from hitting it before shifts

[redtherocket]

Read your instructions.

 

 

When you increase the rev limit or shift point you must do bot "rev limit" and "shift point" in unison.... Why they made the programmer like that I dont know, but if you don't make the settings match things don't work right when you floor the truck .

 

 

Example..

 

If you have your shift point set at +300 and you "don't" match it with a rev limit of +300, the truck won't shift at WOT... It will bounce the limiter and you have to let off the gas...

 

 

Just a FYI... Cuz most people don't read the instruction and take the time to actually understand what going on..

[02suburbanZ71]

I read the instructions but i still didnt understand some of the settings. So i set the shifts at +500 then it shifts at 6100. Is it possible i will hit the rev limiter during shifts if both are set at 6100?

[Gurrzt]

Question;

 

When will you have "I blew up the motor party"?, and is it "BYOB"?

 

If you can not obtain the power you desire @ 5600 rpm, you will not obtain it @ 6100 rpm.

 

JMHO