Jump to content

2015 2500HD High Country Announced

hodges25

By hodges25
in Future GM News & Rumors

Recommended Posts

  • 2 weeks later...
Beagle804 Enthusiast

Beagle804

Posted
Posted

Wondering if anyone has detailed information on the "new" trailering mirrors. My old travel trailer was 7'6" wide and the camper/trailer mirrors on my 2011 2500HD were just fine. Then I upgraded to a 2013 travel trailer and they are making them 6" wider out to 8'. It doesn't sound like much. But it is a tremendous improvement for the inside of the trailer. But now my mirrors seem a bit short, specifically on the passenger side. I WANT to be able to see that back corner of the trailer in the mirror but can not. I also don't really like having to rely on the convex mirror for checking a HUGE blind spot.

 

Any information would be greatly appreciated...

MW

Chris Senior Enthusiast

Chris

Posted
Posted

Here. It was announced a week or two ago. I cant remember where I read it, but here is a link

http://gmauthority.com/blog/2014/04/2015-chevrolet-silverado-high-country-hd-shows-face-before-new-york-auto-show/


Official GM Press Release

http://media.chevrolet.com/media/us/en/chevrolet/news.detail.html/content/Pages/news/us/en/2014/Apr/0409-silverado-high-country.html

Chris Senior Enthusiast

Chris

Posted
Posted

The mirrors look identical to the Ford ford mirrors

dirtfan21 Senior Enthusiast

dirtfan21

Posted
Posted

The mirrors look identical to the Ford ford mirrors

 

100% agree, not a big fan of them. I noticed it is just one big mirror too, why lose the dual view mirror?

Chris Senior Enthusiast

Chris

Posted
Posted

It is 2 different mirrora in the housing. Here is the split

uploadfromtaptalk1398193317690.jpg

uploadfromtaptalk1398193317690.jpg

uploadfromtaptalk1398193317690.jpg

uploadfromtaptalk1398193317690.jpg

dirtfan21 Senior Enthusiast

dirtfan21

Posted
Posted

Ahhh I see it now, thanks Chris. Still not real big on them though, I am glad they are finally putting marker lights in them.

saxman915 Enthusiast

saxman915

Posted
Posted

Figured I would post these pics that I have...post-129164-139820705457_thumb.jpgpost-129164-139820706301_thumb.jpgpost-129164-139820707405_thumb.jpgpost-129164-139820708341_thumb.jpg

 

Sent from my SM-N900P using Tapatalk

post-129164-139820702982_thumb.jpg

post-129164-139820702982_thumb.jpg

post-129164-139820705457_thumb.jpg

post-129164-139820706301_thumb.jpg

post-129164-139820707405_thumb.jpg

post-129164-139820708341_thumb.jpg

post-129164-139820702982_thumb.jpg

post-129164-139820705457_thumb.jpg

post-129164-139820706301_thumb.jpg

post-129164-139820707405_thumb.jpg

post-129164-139820708341_thumb.jpg

post-129164-139820702982_thumb.jpg

post-129164-139820705457_thumb.jpg

post-129164-139820706301_thumb.jpg

post-129164-139820707405_thumb.jpg

post-129164-139820708341_thumb.jpg

06_GMC Enthusiast

06_GMC

Posted
Posted

That thing is nice! Loving the new towing mirrors!!

cobrajet84 Senior Enthusiast

cobrajet84

Posted
Posted

love that they are power folding, power extend would be nice too, but ill take the one I would use more often which is the fold.

newdude Senior Enthusiast

newdude

Posted
Posted

Figured I would post these pics that I have...attachicon.gifuploadfromtaptalk1398207053853.jpgattachicon.gifuploadfromtaptalk1398207062365.jpgattachicon.gifuploadfromtaptalk1398207073424.jpgattachicon.gifuploadfromtaptalk1398207082734.jpg

 

Sent from my SM-N900P using Tapatalk

 

 

So...being that you have these pics do you work at the plant or know someone who does?? Any word as to if this replaces the DPN "old style" on all cabs?

Archived

This topic is now archived and is closed to further replies.

Go to topic listing

  • Latest Articles

  • Posts

    • Another JR
      Parking Brake - Automatic Engagement Questions

      By Another JR · Posted

      On 2021 3500hd it consistently sets automatically when selecting park if the incline/decline is above a certain angle. 
    • Policeoff01
      Feeling Vibration and Jiggles in 2024 HD Gasser Steering Wheel

      By Policeoff01 · Posted

      Curious, did anyone ever get a fix for the vibration reported here.   I have a 2024 Silverado with 6.6 duramax.   I’m noting the same vibration resonating up through the steering shaft into the steering wheel.    Best way to describe- like someone is tapping on the steering shaft/components and it’s resonating into the steering wheel.    thanks. 
    • Gkistler
      2015 Sierra Denali L86 cyl 5 misfire at idle

      By Gkistler · Posted

      Hi friends - first time poster. I have a 2015 sierra Denali with 150k miles, I’m the second owner and she’s given me 75k of great service. I run a pulse AFM disable device. Starting Thursday when I exited the freeway after a short local ride it started idling rough, with an obvious misfire shake and was down on low end power.  I got it home and hooked it up to my scannner and found no codes but in live data a pretty bad misfire on cylinder 5. I replaced the coil, plug and wire with all new OE replacements (Delphi gn10165 coil, acdelco wire and 41-168 plug). It’s still behaving the same way after firing the parts cannon at it.   I know cyl 5 is a non AFM cylinder so I am not thinking this is AFM related but I’m kinda at a loss. injector? Bent pushrod? It’s running too well over 1k rpm to suggest those IMO. Has anyone chase this issue before and what was it? Any suggestions? 
    • zibzer2
      Pulsating Noise 4Cyl Mode

      By zibzer2 · Posted

      2017 Silverado L83 5.3l 6speed transmission Hello, not a new member but havent posted in a while and my old signup info isnt working so had to create a new account. anyways, I have an issue with my truck and hope someone can spread some light on whats happening: -when it goes to 4cyl mode it makes a clunk sound (but not when coasting or going downhill) -when in 4 cyl mode and under load it makes a load pulsating sound (not a tick). -goes away completely when in M5 gear or when plugging in an AFM delete. Im guessing it is one of 2 things but im not convinced of either to be honest. 1. lifter stuck in v8 mode 2. torque converter shudder realistically it doesn't seem like the TC as there is no physical vibration , and it never happens in v8 mode. but maybe? and wouldnt a lifter make a sound whether with load or not? any ideas let me know please. thank you!  
    • Chuck FB
      Some Assembly is Required

      By Chuck FB · Posted

      Which has made me wonder with the various engine failures of a few brands in the last few years, is it sub par materials such as lifters etc causing failures, or bearing clearances on the crank etc or perhaps bad designing of an engine physically or causing too much load on the components due to the hp/torque they can push out of them. Or is the oil viscosity and additive package of current oils or a lack of oil flow by an oil pump not able to supply sufficient oil at idle or under high load at low rpm. Or is it every item I listed that combined together has pushed the limits so far to the left that there is hardly a margin of safety left and add in some fuel dilution and too long of an OCI and premature engine failure is the result ?. 

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...