Jump to content

Will a 33x12.50r20 fit????????

kyhunter5569
 Share

Recommended Posts

Robert.jean1 Enthusiast

Robert.jean1

Posted
Posted (edited)

Members djjtmj12 and Justinass have that set up with only a 2.5" level and state zero rubbing. There are several people on this sight running a 33/12.5r20 on stock rims with no rubbing.

Edited by Robert.jean1
kyhunter5569 Enthusiast

kyhunter5569

Posted
  • Author
Posted

Members djjtmj12 and Justinass have that set up with only a 2.5" level and state zero rubbing. There are several people on this sight running a 33/12.5r20 on stock rims with no rubbing.

thanks! What has everyone heard about the cooper stt??

 

 

Sent from my iPhone using Tapatalk

JUSTINASS Enthusiast

JUSTINASS

Posted
Posted (edited)

Members djjtmj12 and Justinass have that set up with only a 2.5" level and state zero rubbing. There are several people on this sight running a 33/12.5r20 on stock rims with no rubbing.

actually i BARELY rub the sway bar at full lock...

photo%201_zpsasrdqufe.jpgphoto%201%204_zps5r5hku0v.jpg

but so does my 08 with 285/70/17...335k trouble free miles.

photo%203%203_zpsjkfkbouo.jpg

photo%203_zpsplpvjf05.jpg

both have RC 2.5 level

Edited by JUSTINASS
Robert.jean1 Enthusiast

Robert.jean1

Posted
Posted

Well dang it, I'm sorry to have miss quoted you?. I could have sworn you didn't have problems.

 

actually i BARELY rub the sway bar at full lock

ADB0627 Enthusiast

ADB0627

Posted
Posted (edited)

Will the tire rubbing on the sway bar cause issues over time? I find it difficult at times to avoid turning at full lock whether it be in parking lots, parking garages or other tight areas.

 

'14, Crew Cab, Standard Bed

Edited by ADB0627
JUSTINASS Enthusiast

JUSTINASS

Posted
Posted

Will the tire rubbing on the sway bar cause issues over time? I find it difficult at times to avoid turning at full lock whether it be in parking lots, parking garages or other tight areas.

 

'14, Crew Cab, Standard Bed

 

I don't think it will personally...but everyone has their own opinions...

so it is really just personal preference, whether it bothers you or not...

they do not rub the a-arms or anything...like i said it is very minimal rubbing of the swaybar, and only at full lock...which i try to avoid but like you said, sometimes you just can't avoid it when parking etc.

my daughters 08 with 335k miles never saw premature tire wear or anything...still got 70k miles out of the tires.

hope this helps

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • Aimatdeer
      Ac not keeping up

      By Aimatdeer · Posted

      Monday looks like a good day for the dealer to test an ac issue. Hopefully it all turns out good.
    • CamGTP
      Gas Prices

      By CamGTP · Posted

      Paid $2.72 for E85 today.
    • Atlas
      Gas Prices

      By Atlas · Posted

      Welcome back! No, it definitely doesn't pass the sniff test. Even "ceasefire" needs an alternative definition these days.    $5.29 at Kroger today
    • bluev8
      Intermittent no-code issues on 2022.5+ V8 trucks — what did the shop fail to capture?

      By bluev8 · Posted

      That makes sense, and I think you are describing the real product problem. Capturing data is the easy part. If the owner or technician has to manually dig through five minutes of millisecond-level logs, the product has already failed. The device would be at the ECM harness, not at the OBD port, so I agree that data retrieval and event marking need to be thought through carefully. The way I am thinking about the architecture is: The recorder itself should not depend on a phone, app, Bluetooth, Wi-Fi, or cloud connection to capture the event. It should always keep a local rolling buffer and lock the event locally. A button, phone app, or small cabin device would only act as an event marker. If the driver feels a stumble and presses the button 10–30 seconds later, the pre-buffer has to already contain the useful data. For data retrieval, the practical options would be a sealed service USB lead, Wi-Fi download, or a phone/cabin companion device. I would not expect the owner to remove the ECM-side module or work with raw files directly. The cloud or AI side would be for interpretation, not for capturing the event. The truck may have no connection when the issue happens, so the evidence has to be saved locally first. After that, cloud processing could help decode the data, compare it against baselines, and generate a readable report. For the first version, I would keep the automatic triggers conservative and objective: driver event marker bus-off error passive voltage drop / brownout device reset FIFO or queue overflow a normally periodic message disappearing side-to-side communication mismatch, if the topology supports that For “learning normal,” I agree with your point, but I would not want to overclaim it as automatic root-cause diagnosis at first. A realistic first step would be learned baseline comparison for that specific vehicle and operating condition. For example, a value would only be compared against similar conditions: RPM range load / MAP throttle position gear / vehicle speed coolant and oil temperature battery voltage AFM/DFM state, if decoded and validated Then the report could flag things like: this periodic message disappeared compared with its normal timing this value deviated from this vehicle’s normal range under similar conditions the same abnormal pattern repeated after the same type of event the anomaly occurred together with voltage, oil-pressure, misfire, or communication changes But I would still call that “abnormal pattern detected,” not “replace this part,” unless there is enough validated repair data behind it. So the intended product would not be “here is a huge log.” It would need to be an event package: what triggered the capture how much pre/post data was preserved what changed before and after the event whether the device itself reset, overflowed, or saw a bus error selected graphs around the event raw data only as supporting evidence From your perspective, what would make this kind of report useful instead of just another datalog? For example: What are the top 5 parameters or events you would want highlighted first? Would you trust a learned baseline for that specific vehicle, or would you prefer fixed thresholds? How much false-positive flagging would be acceptable before you stopped looking at the reports? What would a one-page report need to show for an independent shop to take it seriously? For misfire, AFM/DFM, oil pressure, or U-code complaints, what would you want the tool to flag automatically?
    • scotthvac.net
      2022-24 halogen - led grille swap

      By scotthvac.net · Posted

      2024 Silverado 2500 HD LTZ grille no camera Parts list   84603331 84913656 84913657 84913654 84913655 84911567 84911568 85646092 85646093 85797921 85797922   11570637  x10-15   grille/bumper bolts 11546500  x10      grille clips 11571006  x10      push/retainer clips 11546454  x6       nut retainers 11611609  x6       M5 bolts 11610700  x6       molding/trim retainers

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...