Jump to content

Recommended Posts

Posted

Does anybody know how many amps the 110V electrical outlets can handle? I'm wondering if I can run a Coleman air bed pump from one of these? Is it about the same as the 12V plug or more/less? I want to buy an air pump for camping, but I also want to be able to use it around the house, so 110V version is preferable it the truck can run it.

 

Thanks.

Posted

The alternating current (AC) accessory power outlet system consists of the accessory DC/AC power inverter module and the accessory power receptacle – 110 V AC. The accessory DC/AC power inverter module converts 12 V direct current (DC) battery power to 110 V at 60 Hertz (Hz) AC power to operate AC powered devices. The accessory DC/AC power inverter module provides up to 150 watts of power. The accessory power receptacle – 110 V AC provides the usual connection for AC powered devices.

 

Posted

The AC outlet is a joke. I plugged my Makita charger into it, and it tripped immediately. Why even put on in there in the first place?

 

You can plug the pump in and see if it trips.

Posted

Okay. Here's the equation:

 

P=VI (Power (watts) = Voltage (volts) x Current (amps))

 

With the numbers provided above, the available current (I, in amps)

should be...

 

I = 150/12 = 12.5 A

 

Yes, I am a physics nerd.

Posted

Don't know the specs but can tell you I tried using my 400w invertor to plug in a pump for an air mattress and it cut out immediately. I doubt the factory 110v plug will allow you to run that pump.

Posted

So, it looks like the 120V pump runs at ~250 watts after the initial ~450 watt surge. That won't cut it. I guess I'm going with the 12V pump.

Posted

12.5 amps should be plenty for most household appliances, even a microwave or a small refrigerator. I'd imagine, though, that you want to pull this much amperage only with the alternator turning/engine running.

Posted

Okay. Here's the equation:

 

P=VI (Power (watts) = Voltage (volts) x Current (amps))

 

With the numbers provided above, the available current (I, in amps)

should be...

 

I = 150/12 = 12.5 A

 

Yes, I am a physics nerd.

 

Maybe I'm wrong, but the outlet is 120v, correct? So wouldn't it be I = 150/120, or 1.25A?

  • Like 2
  • Haha 1
Posted

Okay. Here's the equation:

 

P=VI (Power (watts) = Voltage (volts) x Current (amps))

 

With the numbers provided above, the available current (I, in amps)

should be...

 

I = 150/12 = 12.5 A

 

Yes, I am a physics nerd.

This is 120v AC, not 12v DC....

  • Like 1
Posted

This is 120v AC, not 12v DC....

 

You are correct sir! :)

 

And on top of it from my experience with the outlet, it looks likes its a modified sine wave inverter and not a pure sine wave inverter. This means that there are certain things like some chargers will not be too happy on that modified sine wave.

Posted (edited)

Does anybody know how many amps the 110V electrical outlets can handle? I'm wondering if I can run a Coleman air bed pump from one of these? Is it about the same as the 12V plug or more/less? I want to buy an air pump for camping, but I also want to be able to use it around the house, so 110V version is preferable it the truck can run it.

 

Thanks.

 

You will be fine, I have done this many times with no issue.

 

truck.jpg

Edited by roadblock
  • Like 2
  • Haha 1
Posted

Okay. Here's the equation:

 

P=VI (Power (watts) = Voltage (volts) x Current (amps))

 

With the numbers provided above, the available current (I, in amps)

should be...

 

I = 150/12 = 12.5 A

 

Yes, I am a physics nerd.

 

 

Nerd, maybe but correct, no.

 

Your formula is correct, but you solved for the 12V amperage and not the 110V amperage. Since the pump in question is a 110V device, it's THAT amperage that will dictate whether or not its current draw is too much.

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • Looking up on the web you can the information that would seem obvious. You asked engine components to do more. You get more wear. The answer is they can last just as long but required more maintenance. Apparently having to change lifters, cam and associated components are maintenance or repairs. In some research the normal life span of valve train components are 80-100 miles with 3-5K miles oil change. So the next logical conclusion would be cost per mile. I use that analogy with my wife all the time with vehicles. My Odyssey is approaching 170K. The cost per mile will go up at 200K with maintenance. Looking at a low cost car. A K-4 with a 10-10 warranty. Selling my Ridgeline that’s about to hit the same maintenance milestone. My argument becomes not only I get worry free driving. But at no cost increases. Because I take the money from my Ridgeline and maintenance savings and other potential savings. I’m driving for free. So tying it with a bow. It makes you wonder. Is this a grand conspiracy by the auto makers? Raise the potential maintenance high enough. Buyers by extended warranty to 100K miles. Do the minimum maintenance required. Trade in at the warranty end. How long should they last? That question is what keeps people up at night. The answer is much more complicated than it used to be.
    • Could you cite your source on this?  I cannot find any reference to the US secretly taking the oil.  I find references that the US helped oil tankers move through the Strait of Hormuz, but nothing about what you're stating.  
    • Same thought, also the everything doesn't have the details real photos do (talking about the noise in the photo)
    • Since the media YOU and your buddies are programmed to watch failed to mention this, I'll fill you in.   Trump admitted today that we've grabbed 150 MILLION barrels of oil from the Iranian tankers locked in the Strait by our Navy. We turned off their transponders, took them out to sea in the dark of night since they have zero radar capabilities anymore, offloaded every drop onto another vessel, and put them back by morning so no one was the wiser. That oil has been en-route THROUGHOUT the entire conflict.   Main reason he admitted this is to let even guys on our own side who joined leftists in complaining about the prices that he hears us all, and has taken steps to make sure this didn't spiral into a BAD situation ... just like the mainstream media has been PRAYING would happen, just so they could gloat. Amazes me how these people are rooting for the destruction of THEIR OWN HOME, just to make a President they don't agree with or like look bad! That's next level TDS!   I know your not capable of giving our President the benefit of the doubt, again due to your deep programming, but THIS is why oil never hit $150 a barrel as predicted by your programmers, AND the reason oil continues falling. Like I said before, Trump's got a plan, and this is proof of it. By the end of his term, we're going to be in GREAT shape for a change!   Since I just spent $3,000 this week on #2 heating oil and gasoline, the war most certainly is ending! 🤣   https://mxmnews.com/article/ba359ac9-2711-4851-92de-187f2400f2dd?breaking-trump-cancels-iran-strikes-deal-now-approved-by-all-parties
    • No leaks. Replaced the condenser 3 years ago. Problem was found to be caused by the A/C blend door actuator. Just replaced it and it's blowing out the cold air it used to when I bought it. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...