What's the easiest way to add fogs lights?

[gary03l]

My little brother just got a 2015 so glee can Sierra and it didn't come with fog lights. He wants to add some, what's the easiest way to add them? Thanks

[gary03l]

Will this work? http://m.ebay.com/itm/301839685116?_trksid=p2060353.m1438.l2649&_mwBanner=1

[TJay74]

Not really a way to add the factory ones. Another member on here tried, it was super expensive and then he found out the wiring harness is different and would require a new harness from the firewall forward in order to add the factory connectors. Then you have to find a way to have someone program the BCM for the fog light function as the dealer is not able to do that part either.

[CptMcSaug]

Easiest way would be to buy a bumper with the fog light spots, and run your own wiring to a switch inside. Thats what I would do.

[xelli]

They would end up being a bit higher then the factory fog lights, but a simple light bar like this would work for a mount:

 

http://www.n-fab.com/products/sfID1/75/sfID2/63/sfID3/68

 

You could also use the Rigid mounting kit in the factory location:

 

http://www.rigidindustries.com/mounting-options/46511

 

Either way - you would still need to wire them yourself.

[Spurshot]

if the bumper doesn't have the fog light blank plastic fillers, it's not economically viable to change the bumper just to add them, IMO. You can buy some expensive very small powerful lights to put behind the grill, cheaper than buying all the factory stuff.

[gary03l]

His bumper has the fog light holes, he doesn't want the oem lights. He likes the square led lights like the rigid d2s something like that. I just wanted to know what's the best way to wire them.

We figure the oem route would be extremely expensive