Jump to content

Request for Michelin LTX AT2 Tire Pics


Recommended Posts

Posted

I ended up going with Hankook Dynapro AT3's on the stock 20's in 275/55/20. All in all a nice tire, a little more aggressive looking, but nothing too crazy. Rides nice, wearing well and priced good as well.

Posted

I just ordered a second tire/wheel setup using the Michelin LTX A/T2's and new GMC All-Terrain Wheels (NZH)

 

I swapped out the Goodyear Wrangles SR/A for Michelin Defender LTX M/S when I took delivery last week.

Posted

I just ordered a second tire/wheel setup using the Michelin LTX A/T2's and new GMC All-Terrain Wheels (NZH)

 

I swapped out the Goodyear Wrangles SR/A for Michelin Defender LTX M/S when I took delivery last week.

When u get a chance, can we get some pics of both??

Posted

I ended up going with Hankook Dynapro AT3's on the stock 20's in 275/55/20. All in all a nice tire, a little more aggressive looking, but nothing too crazy. Rides nice, wearing well and priced good as well.

How many miles do you have on your set? Mine have roughly 25k and 2 of mine are cupping like crazy. Except for one time they have been rotated every oil change.

Posted

How many miles do you have on your set? Mine have roughly 25k and 2 of mine are cupping like crazy. Except for one time they have been rotated every oil change.

I only have 5k, so no issues yet. You should take them back, shouldn't be doing that.

Posted

Took these this morning, I'll take another set this afternoon and try to eliminate my shadow, but hope this helps. These tires do have some miles on them and have been rotated at least once

 

BNQGgHt.jpg

OWvNK4t.jpg

TO7AP5a.jpg

Posted

In terms of tire dressing I put on Blackfire Tire Gel yesterday after washing it, supposedly it's one of the few water based tire shines out there as most others are silicone based. Suppose to keep the brown ozone stuff from forming as quickly on the tire, but you do have to wash it with a soap and such before putting it on to clean the brown off

Posted

Make sure you check the specs on Michelin vs good year, I believe the good years are wider, or look wider. Fyi

Archived

This topic is now archived and is closed to further replies.

  • Latest Articles

  • Posts

    • Not sure about DFM tech but i know there's a stop/start deactivation button. 
    • I could be interested if they axed cylinder deactivation and at least have a button for stop start. I’m sure the HP numbers will be higher. I would want a longer warranty to help build confidence. I’m a less is more guy as I get older. A V-8 work truck model would be my choice. I know a few outfitters for custom additions I prefer. 
    • It's official. GMC pulled the covers off the next-gen 2027 Sierra 1500, and we got the first official look. Full breakdown here: https://www.gm-trucks.com/next-gen-2027-gmc-sierra-1500-v8-trim-changes/   The quick hits: SLE and SLT are dead. The new core retail trim is just called "Elevation". Two new V8s, a 5.7L and a 6.6L built with high-performance Corvette architecture roots. No horsepower or torque numbers yet. The 2.7 TurboMax finally ditches the old gearbox and gets the 10-speed automatic. AT4X moves to larger standard 35-inch tires with front and rear e-lockers, Multimatic DSSV dampers, and heavy-duty Jounce Control Dampers. Over 60 inches of combined display on Denali Ultimate and AT4X, complete with a motorized articulating center screen and an adaptive passenger screen. Seven simplified trims across the entire model line to clean up ordering confusion.   So let's get into it: New 5.7L and 6.6L gas V8s with custom active exhaust tuning and a Corvette connection. Is this the exact engine lineup half-ton traditionalists have been begging for? Purging the iconic SLE and SLT names after all these years to lean entirely on Elevation as the high-volume core. Bold move, or a mistake? That motorized articulating 16.3-inch screen that slides up to reveal a hidden dashboard vault. Awesome mechanical theater, or does it make you nervous about long-term durability? Physically lowering the headlamps in the front fascia to improve road courtesy and stop blinding oncoming traffic. Smart real-world engineering, or does it hurt the truck's aggressive stance? What trim are you putting your name down for on day one? Drop your first impressions below.  
    • My overnight hospital stay turned into five.  I developed a post operative fever and an erratic  heart rate.  A blood clot in the lungs was the culprit.  This is apparently a common post surgical complication and easily remedied.   I was the youngest in a four bed ward and a Doctor with a Geriatric specialization was in charge of my care.  All of the nurses were good and some were outstanding at dealing with old people.  It was very evident that my age triggered a different level of care!  My advice to any senior going for a hospital stay is to have a trusted family member advocate visible.  If not, you will still be well cared for, but you may discover that your voice  isn't as strong as it once was! 
    • $4.25 85 oct. in town, down 50 cents.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...