HUB BEARING ASSEMBLY

[toddgotfish]

i have to replace my front hub bearing assembly on my 00 sierra 2WD

on the back of this assembly there is a cover that reads "do not remove"

does anyone know if behind this cover is a splined shaft opening for the 4WD to go into.

if so i can just take the dust cover off the back of mine and put it on a 4WD hub bearing and presto my problem is solved

these things are outrageous , even the junkyard wants 150.00 a pop for'em.

i found a few on ebay for less than 30.00 but they are for a 4WD model hence , the problem

any help would be much appreciated

Thanks

Todd

[Taaaaaaahoe?]

can't help with the 4wd thing sorry....

But I just had my hub replaced under warr. Was yours making a bunch of noise? WOndering if this is commen problem.

MIke

[toddgotfish]

worse than that it was causing my abs to activate.

felt likr the truck was coming apart.

by the way how much would this have been from the dealer if you would have had to pay

[Taaaaaaahoe?]

want to say it was about $300 bucks.

Hummm....My ABS comes on sometimes when I feel it shouldn't really be active (slow, and dry roads) wonder if my other one is going bad? I had them check both...but the drivers "was fine"

Humm?

 

Mine was bad, I jacked up the tahoe, grabed the wheel at 12:00 and 6:00 and could move it in and out about 1in - 1.5in....lots of play!!!!

Mike