So I finally grew enough balls to bake my headlights...

[My18Silverado]

Used this guys steps to do mine after work today. Added clears! 
Few maybe obvious tips that I came across

-Face the headlight up in the oven

-The face and the housing overlap. You have to put a screw drive and lift or pull in small sections.

-Don’t plan on trying to separate it on the first 2 cycles. It will pop out just focus on separating around evenly.

- On mine the corners seemed to have a lot more glue in them 

-After there apart Try your best not to touch the part of the head light after the lens. If you leave dirt or smudge marks and reseal it you will be hosed lol Will see those marks forever!!

 

[My18Silverado]

[My18Silverado]

I do need some help with bulbs now. Know nothing about this kind of stuff, but I want to run a white corner light. Anyone got a link to a plug and play option on that.

[SirenRed16]

I do need some help with bulbs now. Know nothing about this kind of stuff, but I want to run a white corner light. Anyone got a link to a plug and play option on that.

I believe you can find any LED bulb and plug it in. You wont need any resistors since that light doesn't blink or anything.

Sent from my SM-G955U using Tapatalk

[My18Silverado]

So that might explain why when I just put some led white bulbs in my turn signals it blinks like 3 times then goes really fast and says check turns signal on the dash. So what do I need for those?