Lowered guys what's your tire size!?

[bwright2112]

They do! Really nice kit too, I welded mine instead of drilling and using the supplied bolts/spacers because honestly, once you cut the frame you won’t ever be able to remove the c-notch so why waste time drilling and bolting. Once you cut the frame the notch should stay in there forever. 

[Nasty]

2 minutes ago, bwright2112 said:

They do! Really nice kit too, I welded mine instead of drilling and using the supplied bolts/spacers because honestly, once you cut the frame you won’t ever be able to remove the c-notch so why waste time drilling and bolting. Once you cut the frame the notch should stay in there forever. 

Pictures and part number please. I bought an underbed notch but I havent installed it yes. Because it would be easier to reverse a regular c notch than an underbed 

[bwright2112]

Yea this one comes with C-Notch and crossmember notch for rear end (“pumpkin”)

 

Part #6524

[Nasty]

1 minute ago, bwright2112 said:

Yea this one comes with C-Notch and crossmember notch for rear end (“pumpkin”)

 

Part #6524

I wonder why it doesnt state for 16 17 when it's the same frame 

[bwright2112]

Not sure, I’m sure you could call and ask but I am willing to be they just haven’t tried it yet. Might be able to get lucky and be their tester and get it cheap and/or free install

[Cardinals11]

305/40r22 on mine.


Sent from my iPhone using Tapatalk

[K_Sevy]

Here's my 2015 4wd on 285/45/22 with a Belltech 3/4 drop. 

[Slapps74]

On ‎1‎/‎23‎/‎2017 at 5:23 PM, bakerrr said:

I run 305/40/22 on a 4/7 and rub on big dips and when in full lock

Similar for me. Same wheels even but I run a 285/40/22 on the front and no rubbing

[UofAZCats]

Stock 285/45/22 on a 4/7 drop.  Lock up front for tight turns.  Going to be raising it up to 2/4 soon and adding 1.5" spacers.  Looking for that street truck look and want to be able to drive it without steering limitations.

 

For the guys running 305/40/22s on Chevy OEM rims - where did you find tires that size that fit on the 9" wide OEM rims?

[kogdevilnuts]

On 2017-01-23 at 7:23 PM, bakerrr said:

I run 305/40/22 on a 4/7 and rub on big dips and when in full lock

Dear god that’s sexy ?

[lsxgarage]

On 8/26/2017 at 10:50 PM, qwank said:

I'm running the stock 285/45R22 because I got them for free. I'l most likely go with 305/40R22 next time around.

 

 

What about a 285 22 up front and the 305 24 in the rear. Would be sporty and you could drop the rear a extra I ch to level this out.

[lsxgarage]

On 1/25/2017 at 12:27 AM, Marv88 said:

Every time I see the great look as well as photography of this truck I say to myself "this bad boy should be in a Chevrolet commercial!"

Please let us knowwhere u got these wheels.

And full specs. Size and offsets

 

[JimCost2014]

On 7/24/2018 at 10:19 AM, K_Sevy said:

Here's my 2015 4wd on 285/45/22 with a Belltech 3/4 drop. 

Great looking truck!!!

[Front Runner]

On 1/24/2017 at 7:28 PM, 14GMC14 said:

 

275/40R22 Continental 4/7 Belltech

 

 

Sent from my iPhone using Tapatalk

Is that a stock Borla exhaust or modified?

[Ricardo Borba]

I am running 24's