Anyone used the Inez Hotrods 4/6 drop kit? Looking for feedback.

Riveted1 · June 2, 2017

Like the title says. Have been doing research on drop kits and came across these guys. Just wondering if anyone here has used the kit. It's priced in between the McGaughy's and the Bell Tech kit.

For reference: https://www.facebook.com/inezhotrodzcustomz/videos/1325923170830171/

And a pic from their page:

Edited June 2, 2017 by Riveted1

Riveted1 · June 4, 2017

Sunday bump... no one?

Nasty · June 5, 2017

Do they make them for the different arms? Because these trucks come with 3 different arms

Riveted1 · June 5, 2017

That doesn't matter if you replace the control arms, right? This kit uses the factory spindle and new control arms.

Edited June 5, 2017 by Riveted1

Goinovr · June 5, 2017

Never ran across this kit in my searching. I'm looking at the McNaughy's 4/6 deluxe bu tI like the point he made about running out of alignment room.

$650 +shipping is a decent price for an adjustable drop.

Edited June 5, 2017 by Goinovr

Riveted1 · June 5, 2017

I agree on both points, Goinovr. Just wish someone had experience with their setup. Pretty sure I'm just gonna order it to check it out. It's only money and time, right?!

Goinovr · June 5, 2017

Damn. If I was local I'd have that shop he listed (Luckys Suspension Works) do it. $800+tax out the door is an awesome price. Shops around me want an extra grand to install a kit they already over price.

Goinovr · June 5, 2017

I agree on both points, Goinovr. Just wish someone had experience with their setup. Pretty sure I'm just gonna order it to check it out. It's only money and time, right?!

I might have to change my mind as well and hit them up. We'll see what happens in a couple weeks.

51 stovebolt · June 5, 2017

Does anyone sell a kit to lower the front 1" ? don't want 2" think it will be to drastic. Had 2" in my

51 and had to remove because it was too low.

Nasty · June 5, 2017

Yes it matters because the spindle mount holes are different

Riveted1 · June 6, 2017

Good to know, Nasty. I wasn't aware of that. Guess I need to ask a few more questions! Thx for the info.

Goinovr · June 9, 2017

Got the IHR 4/6 coming next week.

$800 shipped to door if anyone is curious.

Riveted1 · June 12, 2017

Got the IHR 4/6 coming next week.

$800 shipped to door if anyone is curious.

Nice! I haven't had time to call them back about the differences in the control arms. I have the cast steel ones.

Also haven't decided if I'm just going to do the 3/5 or go w/the kit you have. They said the 4/6 is more like a 4.5/6.5 on a CC, so 3/5 might be just right for 24's on 295/35's.

Are you going to have it installed or do it yourself?

Static · June 12, 2017

I plan on doing this as well. I spoke with him through facebook messenger. I am in the process of getting my wheels and tires first. I want to do it all at once.

Goinovr · June 12, 2017

Nice! I haven't had time to call them back about the differences in the control arms. I have the cast steel ones.

Also haven't decided if I'm just going to do the 3/5 or go w/the kit you have. They said the 4/6 is more like a 4.5/6.5 on a CC, so 3/5 might be just right for 24's on 295/35's.

Are you going to have it installed or do it yourself?

I'll be installing it myself. I'm running 22's with 305/45's so I have a little more room for that half inch.

I have the cast arms as well. When I called to order he asked which arms I had.