Jump to content

Tailgate Bushing - Keep going bad

FL335i
 Share

Recommended Posts

FL335i Enthusiast

FL335i

Posted
Posted

Ok, I'm on my 4th tailgate bushing since I bought my truck in late 2014.  This most recent one only lasted about 6-9 months.  I keep the tailgate jamb clean.  Not sure why this last one went so quickly.  Is there something else that needs replaced along with it? Part # of the bushing is 22966936.  These things are not cheap either.  About $30 a pop.  That's $120 in tailgate bushings in less than 4 yrs. 

FL335i Enthusiast

FL335i

Posted
  • Author
Posted

Good video.  I have not checked this on my truck... doing it tomorrow! Wonder why that piece on the gate is bent.  EG- overloading? I don't believe that piece is replaceable, it's part of the tailgate itself.  But i will check mine and straighten it out. 

FL335i Enthusiast

FL335i

Posted
  • Author
Posted (edited)

Well turns out my tailgate looked bent just like yours!!! I used a crescent wrench and bent it back.  All straight now.  I cleaned both the tailgate and receiver piece with WD40 and a rag to ensure it's super clean on both ends.  Buying a new bushing today online.  Looking at my old broken bushing, it's broke right where the "flared out" piece would be. Thanks for your post and video. Going to give this another try now. 

Edited by FL335i
txab Senior Enthusiast

txab

Posted
Posted

Wonder what the hinge piece looks like on other's trucks that are not having any problems

FL335i Enthusiast

FL335i

Posted
  • Author
Posted

Well after a few days of use the bushing is doing well.  Tailgate feels great and I really think we found the ROOT CAUSE to the on-going bushing failures.  I'm 99% confident the bent piece was the issue.  Because with a new bushing, when you "shoved it in", into the receiver piece it probably was causing damage to the bushing so it was downhill from the moment of install.  Like I said, after straightening my metal, installing the new bushing.... the tailgate went RIGHT on, super smooth, no shoving and pushing required like in the past. 

  • Like 3
  • 9 months later...
flyingfool Senior Enthusiast

flyingfool

Posted
Posted

try placing a rad clamp around the pivot to give support to the tailgate hinge?, also helps slow down the tailgate thieves

  • 1 year later...
revrnd Senior Enthusiast

revrnd

Posted
Posted

Replaced the bushing in January & it failed this month. I'll hold off replacing it as I'm not interested in throwing 40 bucks away every 6 month. I've messaged Dorman suggesting they produce a replacement.

 

Anyone who thought of using plastic parts in a tailgate (especially in a high load location) obviously has never owned a pickup & used it as a truck, not a grocery getter.

 

?

catpartsman Enthusiast

catpartsman

Posted
Posted

Watch my YouTube video describing why these keep breaking. I showed this to my dealer and they corrected the issue and I’ve not had a broken bushing since. The comments on the video all seem to have had the same result.





Sent from my iPhone using Tapatalk
  • 3 months later...
Dmax Renegade 1234 New Member

Dmax Renegade 1234

Posted
Posted
On 4/29/2020 at 7:06 PM, catpartsman said:

Watch my YouTube video describing why these keep breaking. I showed this to my dealer and they corrected the issue and I’ve not had a broken bushing since. The comments on the video all seem to have had the same result.

 

 

 


Sent from my iPhone using Tapatalk

 

 

What exactly did your dealer do to correct the issue?  Did they replace the tailgate or just grind or bend the part back to a round shape? 

 

My 2016 2500 has had this issue since new.  They've probably replaced it half a dozen times if not more.  Last time they replaced the cup that bolts to the truck side that the tailgate sits in along with the bushing.  This replacement lasted the longest but not much more than a few weeks or so.

 

flyingfool Senior Enthusiast

flyingfool

Posted
Posted
On 4/29/2020 at 4:45 PM, flyingfool said:

i think the big fix is aftermarker tailgate shock from a ford f150

amazon now sells a better tailgate shock now for $20

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • Chuck FB
      Missing thrust bearing? And oil selection

      By Chuck FB · Posted

      Yes I agree, its what amounts to free advertising to let people know about his UOA testing company, and not that there is anything wrong with that but certainly that is a motivator for putting out videos about the science of oil as well as other topics such as oil and air filtration etc. The interesting part I found with his last video is not only the physics behind the reason for the varying wear due to a diesels working torque range causing more bearing load and that higher viscosity oil is of benefit, it was also that the chemistry behind the GM Dexos 0W-20 and the Mobil Dexos licensed 0W-20 are far enough apart that its showing up with a difference in wear even though the two oils are matched in viscosity and in that comparison viscosity was not having the finger pointed at it.    There are a few youtubers out there or one anyway that I have watched a bit of who has gone through the pains of accessing various countries manuals for a certain engine platform and while in the US/Canada it may say use 0W-20 or what have you for some Toyota product, in some other countries it sings a very different tune for the very same engine with the typical traditional oil viscosity/ambient temperature charts to help choose which oil viscosity is correct for the conditions the vehicle will be used in and in some cases its taken an engine in a US manual that states only use 0W-20 as per warranty coverage and yet that same engine in certain other countries may have up to a 15W-40 etc oil option that meets the spec. Another words the guy who is driving through Death Valley or Phoenix and south weather at 120f is often being fed a line of bs by the US system that has forced vehicle companies to restrict the warranty to a specific low viscosity oil for anterior reasons as well as the long drain interval suggestions.    Thankfully youtube is free ( yet anyway ) for viewers to sift through information and of course comes with the good and the bad ( truth and lies ) and we can choose to turn off/not watch what a person finds is bs or just not interested in the topic.         
    • Atlas
      Missing thrust bearing? And oil selection

      By Atlas · Posted

      No doubt... But, as someone who doesn't pay for his services, but who has provided a few views/clicks on his Youtube platform, the data around the Mobil oil testing I think does have some value including to "freeloaders" like me.   A lot of what he's doing is likely showing the OE's work in their oil selection, something that many of us had kind of assumed was true all along, a good balance of both excellent protection and efficiency.
    • Z45
      Missing thrust bearing? And oil selection

      By Z45 · Posted

      Lake Speed is drumming up business for his company just by being in the spot-light so he has a vested interest in stoking the 0W-20 fire.  IMO  
    • Chuck FB
      summer road trips in the 2026 2500HD

      By Chuck FB · Posted

      I knew when I bought my truck that it had off road hill decent or craw control or whatever they call it and rolled my eyes at that but it gets throw on with other options my truck has, I just never had a heads up if the highway speed regular cruise setting had anything to do with the brakes and that took me by surprise. If you've ever been to the top of Pikes Peak and watched those ahead of you on the way down with their brake lights on constantly, one can guess they are probably not gearing down or not enough anyway if their vehicle will allow and a good reason their is a brake check spot part way down where they use an infra red heat gun to check how hot ones brakes are front and rear.    Your right that once one gets out of the front range by Denver and I've not been on that stretch of 285 between Denver and Fairplay myself but I know its high and Fairplay at 10000 feet, Buena Vista at 8000, it drops a bit from there but then your going back up and over the 11000 pass and Durango is at 6500 . So yes your definitely right that 6500 and a lot higher is the theme of going anywhere out in that direction from Denver but hey, the down hill sections give fantastic fuel mileage !.    I don't even look at the fuel pumps for what premium costs here, since I live on a farm and up to this point get fuel delivered I am rarely in front of a fuel pump and when I am, I am often using card lock bulk fuel stations so it tells me what the price is AFTER I buy the fuel. Looking up on gas buddy and converting to US gallons but in Canadian dollars, regular on average of the prices listed was around 5.95 and premium is around 7.00 . That was one reason I did not go for the 6.2 half ton aside from its lack of carrying/towing if one was going by the rule of using premium fuel and until recently one could only buy regular farm gas if playing the few cents off game for farm dyed fuel for a "farm licensed pickup". But yes I hear you on the fuel price difference and like the diesel theme with it often being more expensive then gas it doesn't have quite the charm to it either as it once did although right now here for some reason the price of diesel has come down more so its now inline with the price of regular gas. 
    • KARNUT
      Missing thrust bearing? And oil selection

      By KARNUT · Posted

      I agree with this assessment. As you know I’m testing longevity with vehicles for the first time. I have a few vehicles I passed to kids and grandkids. We’re all past 100K miles some approaching 170K. I’m the only one doing 5k oil changes. The rest whatever the minder says. I’m the only one doing frequent transmission service. My odyssey the trip vehicle at 200K will be finished as a trip vehicle. I recently changed to high mileage oil, Valvoline. I can’t get past the fact that all manufacturers want to claim long service life. I just don’t make sense that they would go with low weight oil for mileage. While sacrificing longevity.

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...