Jump to content

Continental Terrain Contact AT


Boardmember

Recommended Posts

Posted

Anyone try these yet?  TireRack shows high ratings but I’ve never owned a Continental tire.  

Posted

I'm interested in this, too.  Like you said, Tire Rack has good ratings on these and Consumer Reports ranked this on/off road tire and their truck highway tire as best in class.  I'm hesitant to buy a set because our Ford Taurus fleet cars always had Continental tires, and they would always get out-of-round wobbly from belt separations or sidewall bubbles sooner or later, and Conti would not stand behind them.  

Posted

Two important negatives here:  your experience with Conti not backing their distributer to make good for customers and Consumer Reports does back them.

 

I see they have a trial period, but I’d be left swapping them for a Conti I have less than zero interest in.  So if I buy, I drive.   And there are no dealers close to me, so everyone says “Sure we can special order them for you, but you’d be better off buying XYZ that I keep in your size here.”  No kidding.   I don’t want to hand dig you a swimming pool, but I guess for the right price, I would.  

 

Posted

Yep.  Same situation in my area.  There are many Goodyear dealers, a BfG/Michelin dealer, a couple of Bridgestone/Firestone dealers, and a few dealers that carry multiple lines.  Nobody advertises Continentals.  I can get Contis installed at a couple of dealers, but that is not their main line of tires, and as such, I doubt they'd take a stand with me if the tires had problems.  

Posted

We have Continentals on our 2016 Suburban from the factory with 31k miles on them with no issue.  Granted they are not the AT's but they run smooth and handle well.  Same with the Conti Pure Contacts on my 2014 Cruze with 10k on them.  The guys on the Cruze forum loves the Conti's.  

Posted

I got the Conti Terrain Contacts installed today.  By my local Firestone store.   In stock size they’re apparently a little scarce in my region.

 

At ~50 miles I don’t have a qualified review.  But,  they look great.  They are quiet but but not magically quiet.   They ARE smooth but that might be in comparison to what I just took off.   More later if anyone’s interested.   $924.20 OTD.  Then a mfg $70 rebate.

 

Premium territory.  

Posted

I installed a set of Firestone Destination AT on my first (2016) Sierra, had the whole setup swapped to my second 2016, then to my 2018.  I had a little over 40k on them.  I’ve had that tire on 4 different vehicles I’ve owned and it really is a great tire.  I wanted something different.

 

i really like the Conti’s now that I found a pressure that works for me (36psi front, 35 rear). Smooth and quiet and really nice looking.   We’ve had some weird 98*F + weather this week that’s had me idling for a few periods and don’t have a good read on mpg impact.   I think it’ll be nominal when I average it all out over time. 

 

So far, I believe I’ve made a great decision with the Terrain Contacts.  

Posted

I ordered a set from Discount Tire last year for our Subaru Forester, and they've been great (the tires and Discount Tire).

Posted

I have 3 or 5 pics of my dirty/rained on truck in the parking lot at work.  Now need to figure out how to post.  I access GM-trucks from my iPad, the pics are on my iPhone.  I’ll get there.  

Posted
On 7/9/2018 at 10:33 PM, Boardmember said:

I have 3 or 5 pics of my dirty/rained on truck in the parking lot at work.  Now need to figure out how to post.  I access GM-trucks from my iPad, the pics are on my iPhone.  I’ll get there.  

Like they always say on here, "Photos, or it didn't happen!"  :D

Posted

Ya know Mav, I’ve said that myself.

 

today ive been almost two hours south of New Orleans and my boat caught 85 speckled trout and two bull reds.

 

ill tackle this sometime this weekend.  Pardon the pun.   Good night zzzzZZZZzzzz

Archived

This topic is now archived and is closed to further replies.

  • Latest Articles

  • Posts

    • I have a 2024 Chevy Silverado 2500 with the 6.2 liter engine, Vin: 2GC4YME79R1273849, with 27,437 miles. Recently we took a trip from Candor, NY to Townsend, TN pulling our fifth wheel, when I got close to the Townsend, TN area The truck gave me a message of low oil. I checked the dip stick and found it was 2 quarts low. Today, August 27, 2026, I had the oil changed and the technician Found the truck was very low on oil.  Is there a Recall for this? What is my recourse for this issue? Do I call the dealer where I bought it or any chevy dealer?   Robert Strickland 292 Owego Road Candor, NY 13743 352-502-6588 [email protected]
    • We understand the importance of understanding how your Sierra performs, @SoCal Angler. Our team would like to gather the proper details to assist you with your inquiry about your truck's automatic braking. When you have a moment, please visit: https://s.chevy.com/support-request and fill out the request form with pertinent details. This will ensure your request is routed correctly so we may take a further look. We will keep an eye out for your outreach.
    • That is the funnel kit I bought and for being here in Canada I did get a better deal than what other sources were charging through a certain supplier in town that sources more directly and they ordered it for me. There are other items now on the market which would be perfect as well but this has worked well which was the hope when I bought it. I mentioned the Amsoil quart bottles as they have that squarish shape up top and it props nicely on the rim of the opening without falling into the funnel so I can leave them sit and drip a bit. You may have already figured out that to get the cap off the valve cover unless one is 7 + feet tall its not going to be reached without standing on a step of some sort and so when I do that I put the right adapter in and just leave the elbow on the funnel all the time anyway and open the lid and then if using quart containers for sure I can stand beside the truck and leisurely add the oil, and I can leave that funnel on when starting the engine to let it idle to fill the filter and then add the rest of the oil to top it up before removing the funnel and putting the factory cap back on. I put the cap back on the top and slide the bottom cap on as it fits onto the elbow adapter also and then store the funnel in a clean household plastic garbage bag along with the adapter so I have no reason to be washing out the inside of the funnel as I keep it completely clean between uses.    Draining the oil as per the under the truck portion, yes indeed that is slick as someone was thinking on GM's part there and admittedly I don't drop the oil screaming hot in this truck due to the exhaust being there and makes it safer as far as the oil temp if its just warmed up some instead as I don't have the truck on any ramps etc as I do it as the tires sit on the garage floor. The filter is not boiling hot then either and can drop it off into another pail after pulling the drain plug and just leave it drip out. Go back under a few hours later with new filter in hand and clean off the filter base and put the new filter on and install the drain plug. The filter is a little cramped in there as per wrapping ones hand around the filter and I am so used to using the band style filter removal tool that its no big deal and same for snugging it up. My filter wrench is many years old now but I think this is the current version and sounds like the right size, just in case my explanation was not great ( those nylon strap wrenches that one tool fits all filters are not my favorite tool to use, I much prefer this style personally )     57020 Swivel Gripper - No Slip Filter Wrench - Small | Lisle Corporation   And again about the oil draining and filter setup under these GM trucks, I've watched Ford videos of them struggling with oil flying sideways out of the oil pan on the gas 7.3 due to the sideways drain plug onto other components or cross members and guys trying to make shields out of carboard etc and other Ford pickups that Ford insisted they have sideways drain plugs. One win for GM there anyway with this engine. 
    • Kind of off topic, wife drives a 2023 Yukon Denali with the 3.0, been a great rig so far, incredible fuel economy for a truck that big and heavy. Coming up on 50000 trouble free miles.
    • I`m gonna try some of this in my 2000 LM7 that has had the famous piston slap since 17,000 miles or so. I have used Mopar combustion chamber cleaner down the spark plug holes a few times in the past. Corrects the problem for a few months or so. Then returns. GM top engine cleaner has been used also. No good results from this.   This LM7 never used oil. Even running the piss out of it.   Course, I`m gonna use this in my 2025 L84 while it`s still clean. It`s got 13,000 miles. Used Chevron fuel system cleaner [2 bottles in tank] a tank or 2 ago.  
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...