Jump to content

Cap/Camper Shell/Topper


Recommended Posts

Posted

I'm not sure how toppers work on resale or trade in, but if anyone is planning to get a new truck and wants to unload their topper I may be interested if any of the following can be met:

- Somewhat near Colorado, I can turn anything north, south and west into a road trip, East within reason. 

- A.R.E., Leer, Jason, etc. Looking for higher end models in fiberglass. 

- Roofracks

- Graphite Metallic is ideal. 

 

I'm patient, just trying to find a better deal than new. 

Shoot me a PM with a pic to two. Thanks. 

Posted

Got lucky and found mine 2 hours away. Had to be color matched of course, but the hail storm on the way home from picking it up helped with that!

  • 4 weeks later...
Posted

I'm thinking of parting with mine.  I don't really have any good photos of it, as it is covered up in the garage.  No idea what they go for used though.  It's a Leer, and always garaged.  In perfect shape.

 

 

 

 

Truck Cap.jpg

Archived

This topic is now archived and is closed to further replies.

  • Latest Articles

  • Posts

    • Hey everyone, I recently had an issue with my 07 2500HD GMT900. My DRL’s stay on at all times. Right front turn and right mirror turn signal indicator stay on solid at all times. By “at all times” I mean the only way to make them go off is disconnecting the battery. I tore the headlight assemblies out, tried disconnecting the harnesses to eliminate bad wiring at the harness, I unplugged the headlight switch, no change and the mirror turn signal still stayed on. My first thoughts were : Bad bulb and/or socket somewhere, under hood fuse panel bad, bcm bad, tail light or trailer wiring problem, or some random short to power in the harness.  Possibly a bad ground but unlikely. I had a big clue in the fuse panel, it had a burnt smell. I started pulling every fuse that had to do with DRL or right turn/park lamp. Nothing made the right directional turn off but pulling the DRL2 fuse made the DRL’s go out.  After studying wiring diagrams, I found that both problems had that fuse panel in common, the bcm also controls both problems but knowing the fuse panel had a burnt smell I removed and disassembled the fuse panel and found a little corrosion on the printed circuit board.  I ordered a new fuse panel from Amazon for like $260. When it arrived I installed it, and put everything back together, the problem was fixed. I figured the fuse panel needed to be replaced anyway so that was a logical place to start. Hopefully this story helps someone in the future. Regretfully I didn’t scan for codes before I did everything.
    • That stinks. I’m sitting on the side of the road right now with the same issue. Never had an issue before taking it in for the ground strap recall. Now I’m outside of warranty and they’ll probably want $200 just to diagnose what they already “fixed”. 
    • I wonder kind of nuts and bolts they will come up with next? Jim
    • “It should be recognized, however, that there becomes a point where fuel economy oils do not make much economic sense for the end consumer—we talk about a fuel saving of ~€100 compared to a risk of €1000 Euros if the oil is too thin and causes increased engine wear rates. However, the benefit of these oils accrues to the car manufacturers. If their vehicles can save 1–2% fuel by using a special fuel economy lubricant, then that OEM can drastically reduce the amount of fines they need to pay.”   I liked this and the following paragraph as well but it’s really only touching the beginning of the benefits OEMs see from spec’ing these oils. After you factor in “out of warranty” service work and new car sales when these engines fail before their time, it’s a good racket for them. Just because you're paranoid doesn't mean they're not out to get you!
    • Too much voodoo and snake oil.   Time to go EV    😉
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...