Jump to content

Recommended Posts

Posted

I drove a car that had a Pedal Commander installed yesterday. The throttle response was night and day and it was like driving a completely different car. It painted a smile on my face every time I romped on the gas. I was wondering if anyone has installed one on on their Silverado (previous/new gen)? 

 

I do not work for Pedal Commander

I do not sell Pedal Commanders

Im asking if anyone has installed one because I've heard they work better on some cars than others...I dont want to waste my $$$ if they dont work well on Silverados.

Posted

I have the same thing but a different manufacturer on my CTS V.

Vittness Motorsport $179.00

Make the vehicle more responsive
Does not add horsepower. .

83d05227ed6f2738b7cc92a8f372fdb4.jpg4e0e692dffc55d05c49cbfaaa0c49185.jpg

Sent from my SM-N910V using Tapatalk

Posted

Go to www.vitesse-motorsport.com check them out they make them for our truck




Sent from my iPad using Tapatalk

  • Like 1
Posted

I have one on my 17 Sierra, definitely makes in more responsive and you can dial in how much response you want. They have great customer service also. My controller was all scratched so I emailed them a picture of it and they sent me a brand new one super quickly. 

  • Like 2
Posted

I have one on my 18 Colorado with the 3.6. It’s set at City -1 and it makes a big difference.


Sent from my iPhone using Tapatalk

  • Like 1
Posted
15 hours ago, MY164X4 said:

Go to www.vitesse-motorsport.com check them out they make them for our truck




Sent from my iPad using Tapatalk

Website link does not come up. The correct one is www.vitesse-motorsports.com     The "S" must be at the end :thumbs:

  • Like 3
Posted (edited)

Thanks for the recommendation and the link!

 

Im surprised this mod isnt more talked about and added to the "must have" mod list. Manufacturers have baked in awful throttle response for improved MPGs (including sports cars) which sucked the fun out of most cars.

 

The mod is definitely worth every penny with the smiles it paints on your face...especially since it doesnt void your warranty. 

Edited by Chris walker
Posted

This programmer is much cheaper than Pedal Commander or the other brands.

$180 is not bad if it provides the same result as other competitors.

  • Like 1
  • 3 months later...
Posted

Installed a Pedal Commander this weekend and love it.   Running in sport -2

Posted

Not sure if I'd want a better response. The Ford F-150 had really mushy gas pedals which I got very used to then drove my friend's 707-hp Dodge Hellcat. I hit the gas pedal and the rear tires smoked for a very short period of time when I realized what I was doing. Unfortunately, the motorcycle cop was right there and I now have a $470 exhibition of speed ticket.

  • Like 1
  • Sad 1
Posted

Is there a way I could make it more mushy? I kind of like that.

Posted
59 minutes ago, Wiggums said:

Is there a way I could make it more mushy? I kind of like that.

Yes... it can increase or decrease the response.

  • Like 1
Posted
4 hours ago, BillyDee said:

Installed a Pedal Commander this weekend and love it.   Running in sport -2

So I guess they have one for the 2019. Can you post a link to what you purchased? 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.3k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,716
    Total Members
    8,960
    Most Online
    BDS my HD
    Newest Member
    BDS my HD
    Joined
  • Who's Online   0 Members, 0 Anonymous, 649 Guests (See full list)

    • There are no registered users currently online

  • Latest Articles

  • Posts

    • Hello hello looking forward to expanding my knowledge of the 2026 2500 HD that I just bought.   Truck has 3500 miles on it four-wheel-drive crew cab and I’m about to put a 6 1/2 inch BDS lift on it 18 x 10 -25 offset with 37’s   Already have the wheels and tires just waiting on the lift install in about three weeks   Question what surprises am I not gonna be happy with?  I’m not new to lifted trucks so I know that acceleration towing gas mileage all that is affected..   Question is those of you that have this truck this powertrain with a 10 speed Allison and have done the mods that I’m doing,,, how bad is it? Is that Allison constantly gonna be hunting for the right gear to go into? And what about towing, acceleration, fuel consumption as mentioned?    Lastly how come I can’t find any ring pinion gear set up for these axles and when could I expect to see them?   I apologize if there’s any typos I’m doing speech to text on my iPhone.    
    • I've got a 2013 2500 6.0L Flexfuel. Drove the truck earlier today with no issues. Went to run an errand tonight and noticed key fob wouldn't work. Figured battery was dead, so replaced fob batter. Still wasn't working. Grabbed my other set of keys with the other fob and that one wasn't working either. So I manually unlock truck and insert key. Interior lights come on, dashboard lights up, turn key and truck starts. Turn truck off, like a moron, and try starting again. This time no crank, no click, no nothing. Lights still come on and dash lights up, but now I'm getting a service 4wheel drive, service tire monitor, etc. Check voltage on battery and Im showing 12.2v. Throw my battery charger on it and give it 15 mins and try starting again. But still no crank no start. Decide maybe its a bad battery, run to autozone grab a new one and put it in. Same issue. Disconnect battery and let it sit for 15 mins. Try again and still nothing. I had managed to roll the windows down earlier as its a humid night, but now I can't get them to roll up. Power locks are also not working now. Then randomly I try the key again, and it fires right up. Immediately I roll up the windows as we have nothing but rain forecast this week. I shut it back off wait 30 seconds and start up again. Worked a 2nd time. So turn it off, start putting things back together. Try one more time, and back to no crank no start. And now the car alarm starts going off. Had to disconnect battery and leave it that way for the night as I don't think my neighbors would appreciate my alarm going off again tonight. Any thoughts or help would be appreciated. 
    • No one will care for you like you care for you. Do what you can for as long as you can. IMHO of course. 
    • How about them NICKS!!! 
    • Hi there.  Long time lurker, first post.    i have read the previous posts regarding the water ingress problem with this emblem.  I bought my 1500 SLT the  summer of 2025 new and after reading the MANY problems with these emblems failing I decided to install one anyways.  As per a YouTube video, I sealed ( or tried to) this sign with silicone sealant around the outer perimeter joint and the holes that were already somewhat sealed on the rear plate of the emblem.  And installed the connector assembly using dielectric grease on the connectors. The installation looked great and worked well for about 4 months……then FAILURE.  Grrrrrr…… I live in the great white north and wash my truck weekly in an automatic car wash  to keep the salt off.  Let me tell you that removing the old, failed emblem is a whole different animal than removing the OEM individual letters without removing the grill assembly. Mainly because the illuminated logo is built differently than the original letters which  you can remove the red surface lettering with a knife or some kind of blade which gives access to the tabs which hold the logo onto the grill. So I had to essentially destroyed the old emblem to remove it. Doing so killed my chance of doing somekind of autopsy on the failed , old logo.  But there was plenty of water inside when I ripped it apart.  Prior to installing the new assembly I tried it with the old harness and it works fine.   Does anyone have any insight as to where the water is getting into this emblem? I intend to seal the new logo with slow curing epoxy this time around using a syringe.  I think this newer emblem may be an updated unit which I hope GM got the vendor to fix. It has an October 2025 date on it.    If this one  fails,  I am just going to revert back to the non-illuminated letters….AFTER PULLING THE GRILL.    Any thoughts on sealing with epoxy would be appreciated. Thx!   Doug  
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...