Jump to content

Recommended Posts

Posted
3 minutes ago, Aaron G said:

I got a 2018 gmc sierra and noticed when I turn the ignition on engine light stays on without the truck running but when it’s on engine light is not on is that normal???

Welcome to the site.

 

Yes, 100% normal. If it stays on, or see it while driving, then you have a problem.

  • 1 month later...
Posted

So I have a brand new 21 trail boss and I’ve had 4 check engine lights come on. First 2 we’re misfires in cylinders 1 and 6 but they couldn’t track what it was because the codes were stored because the lights didn’t stay on. The 3rd came on 4th of July but said it was to update ecm. Then the day after it came on for a 4th time and it stayed on solid check engine light. Took it in and they said they found code p0300. They performed crankshaft variation relearned procedure and cleared code. Told me to report back if it happens again. How many more times until I can get a lemon law involved. This probably is getting old on a brand new vehicle. Any suggestions? Anyone having the same issue with these vehicles?

  • 4 months later...
Posted

I bought a 2021 GMC Sierra AT4 with 30 total miles on it on saturday. Last night, Monday night, as in 2 days later, I have a check engine light and an "emissions system" diagnostic issue. 


I am pissed to say the least

Posted

Ask your dealer to perform the latest ecm update and to do the crankshaft position sensor relearn. Fixed my shudder issues and the CEL light hasn't flashed for the misfire now in over a week. I think they finally fixed it. 

  • 2 weeks later...
Posted (edited)

I just purchased a 2022 Silverado Custom at the end of October (2021). within days I got the message "Service Front Camera", I took it in to the local dealership and they said the front camera would need to be replaced and it would need to be ordered and be a couple of weeks. A day or two after that the Check Engine light came on. I took it in and they said they fixed it. they said it was due to my drivers side door being open too long when they made a small adjustment on the door. I thought that was odd but whatever. The next day the light came on again so i took it in that morning. this time they said it was power supply transformer and replaced it. the light came on the next day and i brought it back again. it was in the shop for 3 days without an answer at which point I picked it up as i needed it over the weekend and they said it was safe to drive. I brought it back in today (Monday 11/22) and I was just informed it wont be fixed today either. Extremely frustrating. I even contacted GM directly via chat last week and was basically instructed to contact the CEM (Customer Experience Manager)at the dealership my truck is at. Tried that, the phone just rand and rang.

 

My observation over this past weekend is that the Check Engine light comes on at about 9am the past 2 mornings as the outside temps start to warm up and then turns off at around 5:30-5:45 pm when the weather starts to cool down. It seems like 80 degrees is more or less the magic number. I also notice that when the Auto Stop feature turns the car back on, the infotainment screen flickers (almost everytime) and the music gets static-ky (using streaming service, not the radio). the Service Front Camera message also made a comeback this past Saturday.

 

All of that said, the truck runs fine. Has anyone else had similar symptoms or issues?

 

2022 Silverado 1500 Custom Crew Cab. Inline 4, 2.7 liter, turbo. Assembled in Mexico.

Edited by TonyTone
typos
Posted
9 minutes ago, TonyTone said:

I just purchased a 2022 Silverado Custom at the end of October (2021). within days I got the message "Service Front Camera", I took it in to the local dealership and they said the front camera would need to be replaced and it would need to be ordered and be a couple of weeks. A day or two after that the Check Engine light came on. I took it in and they said they fixed it. they said it was due to my drivers side door being open too long when they made a small adjustment on the door. I thought that was odd but whatever. The next day the light came on again so i took it in that morning. this time they said it was power supply transformer and replaced it. the light came on the next day and i brought it back again. it was in the shop for 3 days without an answer at which point I picked it up as i needed it over the weekend and they said it was safe to drive. I brought it back in today (Monday 11/22) and I was just informed it wont be fixed today either. Extremely frustrating. I even contacted GM directly via chat last week and was basically instructed to contact the CEM (Customer Experience Manager)at the dealership my truck is at. Tried that, the phone just rand and rang.

 

My observation over this past weekend is that the Check Engine light comes on at about 9am the past 2 mornings as the outside temps start to warm up and then turns off at around 5:30-5:45 pm when the weather starts to cool down. It seems like 80 degrees is more or less the magic number. I also notice that when the Auto Stop feature turns the car back on, the infotainment screen flickers (almost everytime) and the music gets static-ky (using streaming service, not the radio). the Service Front Camera message also made a comeback this past Saturday.

 

All of that said, the truck runs fine. Has anyone else had similar symptoms or issues?

 

2022 Silverado 1500 Custom Crew Cab. Inline 4, 2.7 liter, turbo. Assembled in Mexico.

It's 2022-Brand-Stinkin-New...dangit!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,920
    Total Members
    8,960
    Most Online
    Frank V
    Newest Member
    Frank V
    Joined
  • Who's Online   6 Members, 0 Anonymous, 1,398 Guests (See full list)


  • Latest Articles

  • Posts

    • Folks, Have a great new 2026 WT  (std cab, 2.7/4WD) w/base 40/20/40 mech adj bench "fake buckets"  (with lower and upper center console) heavy vinyl seats.  Overall the seats are very comfortable and the vinyl is heavy and appears less likely to 'split out'. Am very tall (6'5")  + a bad back/osteporosis/former hyperparathyroidism so ease/range of movement is a bit restricted.  The truck rides a bit high and I use a nerf step bar w/my left foot to step in, then I put right foot/leg in, drag my butt in  & get seated.  Worked fine in my 2018 RAM quadCab. But I end up dragging my butt over the left raised sidecushsion area of vinyl seat, and due to texture there's fair amount of traction on slide inward.  (ArmorAll didn't improve.) If the seat were even ~1/2" - 3/4" lower it'd be helpful, but base seats just have the forward/backward underseat bail and the side lever for tilt which really doesn't affect seat height.   I really don't want to 'de-puff' the left side sidecushion forming the  fake 'bucket'. I know one company sells 'seat elevator blocks':  but is there a simple way of lowering the height of the driver seat instead?   Thanks Bill W San Jose  
    • I have a basic 2026 1500 WT  (2.7L/4WD reg cab shorttbed). Comfy, generally happy with electronics/radio - but is there a way I can add switches to steering wheel right-side position (curr. empty) so I can adjust volume, push phone button to voice dial, etc? Bill W San Jose  
    • The curb weight on a 1 ton crew cab long bed is around 7k lbs.  Now, I don't know where you went to school but 9k is not more than 2x 7k lbs. More than 2x 7k lbs would be 14k+.   With that said, obviously yes you're going to feel a 9k lb trailer when slowing down.  I already said, when accelerating.  When changing lanes?  No.  But if you look at the context of what was quoted, the original person said, "after a mile or two..." which means that would be after the accelerating portion and you're driving a generally steady pace.  Please do learn to read and comprehend.
    • So I purchased the Range unit for my 2026 and I am seeing different locations suggested for the ECM . Can anyone confirm wither under hood, left side or right side or behind the wheelwell?
    • Like I've said before. Di and Carbon buildup is not that big of a concern. Engine had minimal buildup, and that engine was obviously not super well maintained. Do regular oil changes, and you're gtg as long as the rest of the truck lasts. Also, the High Pressure FP that people ****** about, but can't tell you why.  Now, I wish they'd trash the variable oil pump. No real world issues with them, but I'll gladly eat whatever miniscule MPG it's saving me in favor of more oil at all RPMs.    Curious to see his assessment of the 7.3 compared to the 6.6. I expect he'll praise the port inj, but from a structural standpoint, the 6.6 is as robust as any engine out there.    Not to take away from the 7.3. I feel it's equally as good as the 6.6.     As to heat on the rear cyls, I'd have to see numerous examples before I'd say it's an issue. Especially not knowing the history of that engine. For all is known, they could have blown a rad hose, and ran it hot, and the 2 rear cyls may be the first to get hot in a low coolant situation, but not be an issue aside from that. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...