Jump to content

Recommended Posts

Posted

Has anyone added a sub and amp to the Bose factory system. I want to add my own not the kicker package that gm sells. Just wondering how difficult wiring it in is and if it'll play nice with Bose?

Posted (edited)

I added an 8-channel JL amp and new front tweeters to my 2015 Denali HD with the Bose and it sounded great - 5X better than factory.  Really gave the existing factory sub the power it needed, and it was minimally intrusive to the truck.

 

In hindsight, I should have pulled it out and kept it for the new truck...

Edited by Tomato
Posted

I just got a 20 Trail Boss with Bose, also looking for Bose upgrade options.  I did a whole two amp custom box stereo in my 2015 Silverado LT Crew Cab. With the Bose I would like to be less intrusive and get the best upgrade without pulling all the wire for a full aftermarket amp install, etc.

 

SO far I have seen the GM Kicker and a JBL under console.

 

This Kicker looks decent and is a little less expensive than the GM Kicker, both 200 watts.

https://www.shopchevyparts.com/electronics/2018-sierra-1500-crew-cab-audio-upgrade-kicker-subwoofer-kit/19303118-p-92297288.html

 

I am a stereo guy and can do it all from custom box to passive crossovers but I really want to stay close to the Bose ( minimal wire disruption) and get the most upgrade I can starting with lows and then mids and highs if possible.

 

Also considering a sound processor like below to max what I have:

 

JL Audio FiX-86 OEM Integration Digital Sound Processor w/ Automatic Time Correction and Digital Equalizer

 

Appreciate any feedback especially reviews from those who have already upgraded Bose, Thanks!!

Posted

I'm interested in this too...I saw this and was wondered if it would solve the problem of most of the bass coming thru the door speakers...I am not an audio guy by any means so please excuse my ignorance...I just like to hear that bass drop when listening to the LACs or Snoop lol 

 

https://www.shopchevyparts.com/electronics/2020-silverado-1500-audio-upgrade-kickerreg-powered-subwoofer-kit-crew-cab-and-extended-cab/19417164-p-92305764.html

 

  • 5 months later...
Posted
On 3/5/2020 at 5:17 AM, drob999 said:

I just got a 20 Trail Boss with Bose, also looking for Bose upgrade options.  I did a whole two amp custom box stereo in my 2015 Silverado LT Crew Cab. With the Bose I would like to be less intrusive and get the best upgrade without pulling all the wire for a full aftermarket amp install, etc.

 

SO far I have seen the GM Kicker and a JBL under console.

 

This Kicker looks decent and is a little less expensive than the GM Kicker, both 200 watts.

https://www.shopchevyparts.com/electronics/2018-sierra-1500-crew-cab-audio-upgrade-kicker-subwoofer-kit/19303118-p-92297288.html

 

I am a stereo guy and can do it all from custom box to passive crossovers but I really want to stay close to the Bose ( minimal wire disruption) and get the most upgrade I can starting with lows and then mids and highs if possible.

 

Also considering a sound processor like below to max what I have:

 

JL Audio FiX-86 OEM Integration Digital Sound Processor w/ Automatic Time Correction and Digital Equalizer

 

Appreciate any feedback especially reviews from those who have already upgraded Bose, Thanks!!

This may be a late response.  However, look at LLJ Customs.  They have several wiring harnesses that are plug and play.  I just ordered one.  https://lljcustoms.com/store/ols/categories/gm-vehicles

Posted
On 3/4/2020 at 9:37 PM, Tomato said:

I added an 8-channel JL amp and new front tweeters to my 2015 Denali HD with the Bose and it sounded great - 5X better than factory.  Really gave the existing factory sub the power it needed, and it was minimally intrusive to the truck.

 

In hindsight, I should have pulled it out and kept it for the new truck...

Did you keep the bose speakers and just added tweets?  So basically no longer using the bose amp and using the JL amp to power everything including the new tweeters?

 

I'm in the process of putting in jl audio sub under the back seat of my 2020 High Country.  The Bose mids sounds ok, but their is basically no tweeters.  I want to add some tweeters to the mix.  I didn't want to add an aftermarket amp for the mids and tweets but I guess in order to add tweeters I will have to.

Posted
9 minutes ago, blyent said:

Did you keep the bose speakers and just added tweets?  So basically no longer using the bose amp and using the JL amp to power everything including the new tweeters?

 

I'm in the process of putting in jl audio sub under the back seat of my 2020 High Country.  The Bose mids sounds ok, but their is basically no tweeters.  I want to add some tweeters to the mix.  I didn't want to add an aftermarket amp for the mids and tweets but I guess in order to add tweeters I will have to.

Yes, I only changed out the dash tweeters - left all the other factory ones in. I had a shop do the install, but I am pretty certain they ran the JL after the factory Bose amp. I believe you need it for various controls of the system.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Latest Articles

  • Posts

    • I was around and remember that era very well, so I'm calling b/s on that statement. If they were that bad no police department or taxi company would've bought a single one ... but they were used in both services (and fire) for DECADES. They were bulletproof and proven. Even the early 21st century ones weren't too bad! The early models were legendary.   Mine is proof, but people like atlas are blinded by agenda and refuse to believe facts right before their very eyes.   Even decades after they were built, a new generation started driving them, posting all their builds and shenanigans on Grandmarq.net and Crownvic.net. The failures would show up then, since they all were deep past 100k-150k miles by that point, and younger drivers tend to be a little aggressive, especially with vehicles than can lay a one-tire fire for as long as you hold your foot in it. They've more than proven themselves over the decades.   The only thing that'll really take them out is road salt. The bodies and sheet metal were garbage. A victim of the cheapout FoMoCo and GM have been partaking in before then, and since.   Today it's the stuff that counts - the undercarriage that rots away first!    GMs Caprice was no slouch either. Reliable as a stone ax - the opposite of what they build now.    
    • Let me know how your vehicles do in 10 years. You don't know ******, kid. 😂    There's a reason that Panther platform was used as police, fire, and taxi service for DECADES ... long before you were born, apparently.
    • If your connector also has a big lever to get the connector on and off, you don't want to force the lever either way, as it becomes a bigger problem if you bust the lever or the mechanism it works.
    • It's just useful to disconnect the battery to prevent odd shorting out when unplugging/plugging stuff together.  I also  touch the two cable ends together (after disonnecting) to drain the small amount of stored battery energy in various modules.   I believe the main system where you need to be more concerned with, so you need to do the above and then wait some time, iss when you are working on the air bag system, to prevent inadvertent firing of the air bags.   The in-cab switches are just that, plain switches, it's generally not a problem to swap them in/out.  For my '12, I'll get an error message on the dash if I power up the truck w them unplugged, but that's it (power up= turn the ignition on).   The ITBC located above the spare tire is a computer that manages the trailer brake system.  That is probably more important to have the battery disconnected.  It does have to be programmed to the truck, either before or after it's installed, for it to work.  For my '12, I had a very hard time reinstalling the main connector to it (IDK if yours is the same or not), it turned out the silicon seal was jamming up, preventing it from going on all the way.  I finally got it fully installed by lubing the seal with a bit of dielectric grease, then it slid on and latched in place easily.
    • JR ! I just got the truck back from the Dealership today . The technician did a cold remote start on the truck this morning and it made the noise . It was determined that it was a starter issue and replaced it under warranty . Of course   it did not make the sound after a new starter was put in because the truck was not cold . We will we see what happens tomorrow morning when I start the truck cold  . Keep tuned !   Oh I found a video on YouTube of a cold start and it did the same thing your truck and mine do , I will see if I can find it and post it up
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...