Jump to content

GM part number needed

MaverickZ71
 Share

Recommended Posts

MaverickZ71 Senior Enthusiast

MaverickZ71

Posted
Posted (edited)

I need a replacement passenger side outside mirror for our 2009 Silverado Crew Cab 1500 LT Z71 4x4 after some igmo decided to play batter up and pound it repeatedly with a baseball bat or something.  Seems like there are lots of roving bands of punks these days, all up to no good. 

 

It had the black plastic mirror housing (not trailer mirrors) power fold, heated mirror, and built in turn signal.  I do not have all of the pieces from the housing/mirror, and I cannot find a part number(s) on what little was left hanging there.  Looking at some websites, I am seeing about 4 different options.  Apparently the part number the GM dealer gave me is for a manual mirror without turn signal.  2 different body shops gave me 2 other different numbers.  I want a direct replacement of the factory mirror, if possible.  I cannot find side mirrors on the AC Delco website.  

 

The truck has the optional side mirrors listed as "DL3 - OSRV MIRROR W/DRIVER SIDE AUTO DIMMING, PWR FOLD & ADJ, HEAT, TURN SIGNAL (REPLACES STD/PKG MIRROR)" on the "build sheet" that someone helped me get on this site when the truck was new.  

 

If somebody could find me the correct GM parts number for the mirror I need, I'd be much obliged.  Thanks!

Edited by MaverickZ71
chem_man Enthusiast

chem_man

Posted
Posted

Go to this website https://www.wholesalegmpartsonline.com/ and choose your options and you will see all the different mirrors for your truck.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • KARNUT
      What did you do to your "other" car (aka musclecar) today

      By KARNUT · Posted

      I get the same results with pictures. Then I figure it out. Then I forget. Screw it.
    • Jsdirt
      What did you do to your "other" car (aka musclecar) today

      By Jsdirt · Posted

      I guess I'm the only one on this forum who can't get effing pics to load here! Do you have to resize them to post, or am I just blocked from uploads?   I have the same luck with automotive electronics ... but this is the ONLY site on the net that I have this problem!   I'd post pics of what I'm working on ... but I CAN'T! 🤬       Just fabbed up the kickdown cable (had to extend the cable mount WAAAY out from the throttle shaft to get a full pull), and parts arrived for the fuel lines on the 940 carb conversion project. Should be able to drive this thing by the end of the day. If not for work, I'd have had this thing done SIX weeks ago.   Got the jetting sorted out last week. Had a real bad tip-in bog that I couldn't seem to correct. Friggin float height was over 11mm too HIGH! eBay purchase, so no wonder everything is screwed up right out of the box! I ended up with a larger dual-squirt accelerator pump jet anyway instead of the single. Also moved the 70 primary idle jet (4 sizes too big out of the box) to the secondary idle circuit, and installed a 57 in the primary. Runs great on the fuel bottle!    Still using the computer for ignition. Going to drive it first and see if I want to go through the project of installing an intermediate shaft with a distributor drive gear, so I can install a block-mounted distributor and run points, 100% computer free. I should do that anyway just from a simplicity / reliability / tunability standpoint. The electronics left me stranded last year a couple times! I can't tweak the timing to my liking right now because of the computer. Tried twisting the cam-driven distributor already ... and the damned thing just reverts back to where it was! That's infuriating. But if it runs well enough I might save that for next season.   Just driving it in and out of the shop to work on other projects, it feels 1,000% more responsive with the carburetor. Also fires MUCH faster when cranking. Can't wait to drive it and see if I got more than 114 ponies, lolol.
    • Atlas
      What did you do to your "other" car (aka musclecar) today

      By Atlas · Posted

      Triumph makes me think of cars not bikes. Especially with model names like the TR7, that was a Triumph car model too. Peak TR for me was the TR250. You could retain the post-war roadster looks, with an optional surrey hard top, but with an inline 6 engine instead of the TR4's anemic 4-cylinder, but still have a 4 speed, optional overdrive.   I know almost nothing about Triumph bikes, except that they exist. Good looking bikes though.   I don't know if I could just have one vehicle. The Silverado does it all except for fitting anywhere. But it leaves a void in real driving enjoyment, unless driving an extremely large sofa is your thing.   What did I do to my 'other' (muslce car - which one!?) vehicle lately. I took my '23 SS for a drive. It's only got 1600 miles. I keep reminding myself I shouldn't be so precious about this car. It likes to be driven. Needs to be driven. Life is short and if I don't enjoy it, someone else will. The other half calls it "the garage ornament".
    • mandrautomotive
      A Clean 40" Light Bar Setup for the 2022+ Silverado 1500

      By mandrautomotive · Posted

      Hey everyone, Thought we’d share our 40" SLIM Light Bar setup for the 2022+ Chevrolet Silverado 1500 for anyone looking at behind-the-grille lighting options.   The 40" bar sits behind the lower factory grille, so it stays pretty well hidden when it’s off. The mounting position is also adjustable, which helps with getting the bar positioned properly depending on the grille.   A few details on the setup:   40" SLIM LED light bar Fits 2022–2026 Silverado 1500 Spot + flood beam pattern White, amber, or white with amber DRL backglow Adjustable mounting position No cutting or drilling required Doesn't interfere with the active grille shutters Vehicle-specific mounting brackets       It’s a straightforward option for anyone who wants the coverage of a 40" bar but prefers to keep the front of the truck relatively stock-looking. Curious what the Silverado owners here prefer — hidden behind-the-grille lighting or an exposed bumper-mounted setup?  
    • Grumpy Bear
      What did you do to your "other" car (aka musclecar) today

      By Grumpy Bear · Posted

      Yes. Absolutely. That doesn't mean I don't like and enjoy a variety of machines. I went for a time with no other vehicle than a 1976 Triumph TR7-V Tiger. Loved that bike and rode it 365 in any and all weather. I did not feel deprived of anything.   

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...