Jump to content

Looking for a 1 1/2 top mount spacer...

SILVER SLED

By SILVER SLED
in Modifications, Wheels & Tires

 Share

Recommended Posts

SILVER SLED Senior Enthusiast

SILVER SLED

Posted
Posted

Just like the title says.  I tried the 1 1/2 motofab bottom spacer and it pushed the shock against the cv boot.  So I'm thinking I'll have to go with a top spacer, but can't seem to find a 1 1/2" top spacer.  Right now I have barely an 1" of rake in the truck, and think 2" may be a bit too much lift.  2" made my 18 look too high in the front at times.  So any help would be greatly appreciated.  

xsquid Enthusiast

xsquid

Posted
Posted

Took my motofab 1.5 lowere spacer out right away after seeing how close it was. Hit on full droop. Try Rough Country leveling strut.

Worth to extra cash rides better the stock. My seem to settle at 1.5 . Also have a 1.25 block in rear. 

SILVER SLED Senior Enthusiast

SILVER SLED

Posted
  • Author
Posted
1 hour ago, xsquid said:

Took my motofab 1.5 lowere spacer out right away after seeing how close it was. Hit on full droop. Try Rough Country leveling strut.

Worth to extra cash rides better the stock. My seem to settle at 1.5 . Also have a 1.25 block in rear. 

Thanks.   Good info. 

sweatandsteel Enthusiast

sweatandsteel

Posted
Posted

I went with the 1.75" top mount kit from Zone Offroad. I haven't installed it yet as I decided to swap out the upper control arms at the same time and just ordered some from Camburg.

SILVER SLED Senior Enthusiast

SILVER SLED

Posted
  • Author
Posted
47 minutes ago, sweatandsteel said:

I went with the 1.75" top mount kit from Zone Offroad. I haven't installed it yet as I decided to swap out the upper control arms at the same time and just ordered some from Camburg.

Do you have a link?  I only see a 2” top mount spacer.  Please and thanks.  

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • bwiese
      on-wheel cellphone control: 2026 1500 WT (2.7L 4WD std cab)

      By bwiese · Posted

      I have a basic 2026 1500 WT  (2.7L/4WD reg cab shorttbed). Comfy, generally happy with electronics/radio - but is there a way I can add switches to steering wheel right-side position (curr. empty) so I can adjust volume, push phone button to voice dial, etc? Bill W San Jose  
    • Tyler Gibbs
      Travel Trailer 2024 2500 HD 6.6 Gas Engine ?

      By Tyler Gibbs · Posted

      The curb weight on a 1 ton crew cab long bed is around 7k lbs.  Now, I don't know where you went to school but 9k is not more than 2x 7k lbs. More than 2x 7k lbs would be 14k+.   With that said, obviously yes you're going to feel a 9k lb trailer when slowing down.  I already said, when accelerating.  When changing lanes?  No.  But if you look at the context of what was quoted, the original person said, "after a mile or two..." which means that would be after the accelerating portion and you're driving a generally steady pace.  Please do learn to read and comprehend.
    • sFrank
      2026 Silverado Range AFM DFM ECU loaction

      By sFrank · Posted

      So I purchased the Range unit for my 2026 and I am seeing different locations suggested for the ECM . Can anyone confirm wither under hood, left side or right side or behind the wheelwell?
    • No F-bdy Bs
      Dave's Auto (custom engine builder) tear down of L8T

      By No F-bdy Bs · Posted

      Like I've said before. Di and Carbon buildup is not that big of a concern. Engine had minimal buildup, and that engine was obviously not super well maintained. Do regular oil changes, and you're gtg as long as the rest of the truck lasts. Also, the High Pressure FP that people ****** about, but can't tell you why.  Now, I wish they'd trash the variable oil pump. No real world issues with them, but I'll gladly eat whatever miniscule MPG it's saving me in favor of more oil at all RPMs.    Curious to see his assessment of the 7.3 compared to the 6.6. I expect he'll praise the port inj, but from a structural standpoint, the 6.6 is as robust as any engine out there.    Not to take away from the 7.3. I feel it's equally as good as the 6.6.     As to heat on the rear cyls, I'd have to see numerous examples before I'd say it's an issue. Especially not knowing the history of that engine. For all is known, they could have blown a rad hose, and ran it hot, and the 2 rear cyls may be the first to get hot in a low coolant situation, but not be an issue aside from that. 
    • Donstar
      Navigating senior years.

      By Donstar · Posted

      "Life is getting back to normal."    I'm driving again and all new joints are operating as expected for this stage of recovery.   My most recent joint replacement still requires a lot of attention but experience has taught me that time will quiet the remaining pain.  I joked with my surgeon that another joint replacement would take my mind off my most recent surgery and he responded by saying the next will be a hip!  There are no plans for another surgery but, unlike me, I don't think he was joking!  I certainly wouldn't refuse further replacement  if required but hope to spend time out of the "post-op"  period.  I can't stress enough that if you have been recommended for total hip, knee or shoulder replacement that you welcome the offer.  Post-op "recovery" may sound daunting and painful, however, this is far better than the insidious erosion of mobility you are currently experiencing.  Imagine what it would feel like to wake up most mornings feeling better and more mobile than you did the previous day!  Prior to my first surgery in June 2025, even getting out of bed was becoming a formidable task.  Since the day after my first surgery, I get out of bed everyday easily and unassisted.  Making the switch to feeling a little better each day rather than a little worse, is hugely motivating!

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...