Jump to content

Let's Talk Retractable Bed Covers

Transient
 Share

Recommended Posts

Transient Senior Enthusiast

Transient

Posted
Posted

My truck has the short bed. It also has the GM sport bar. I've been running the Rough Country hard trifold tonneau since I bought the truck. It works great! There's nothing wrong with it. As several ex-girlfriends have told me, "It's not you. It's me." That really is the case in this situation.

 

I wrote the book on social distancing before COVID ever became a thing. At my kids baseball practices and games I prefer to sit in the bed of my truck in a lawn chair and watch everything. I hate being around others. Problem is, I'm in Kommiefornia, and social distancing is still required. This means my wife now wants to sit in the back of the truck. She said it's the best seat at the game. However, with the sport bar the trifold cover I currently have only allows the first part of the cover to be opened. I'm now thinking about a retractable cover.

 

I've been looking at the various retractable covers, such as Embark Max by Advantage and the retractable cover by Roll-n-Lock. I'm curious what has and hasn't worked for others in the past and present? I'm considering power open/close models, but if they are a PITA to maintain functionality then i don't mind going with manual operation. The sport bar mounting flanges take up almost the entire width of the top plastic cover of the bed walls, so the tonneau cover weather gasket overlap is very important.

 

If everybody could share their opinions, experiences, thoughts, etc it would be greatly appreciated. Thanks in advance.

 

Sent from my SM-N960U using Tapatalk

 

 

Rackumrack Enthusiast

Rackumrack

Posted
Posted (edited)

I have a RETRAX and really like it.  I do not like the room it takes up at the front of the bed next to the cab but I understand that is the trade off for a roll up cover, it has to go somewhere.  I think roll-n-lock may not be as deep for the cover storage but I have no issues with the RETRAX.  I have the polycarbonate model, not the aluminum.  I have no issues with leaks.  If it comes a really hard rain I get a slight leak on the edges where the cover meets the tailgate.  It's very minimal I would not have an issue putting luggage back there during a hard rain.  We don't get much snow in SC so I can not attest for standing snow.  I think you will be happy with either the RETRAX or Roll-n-Lock compared to what you have.  You get a lot me versatility due to being able to lock the cover anywhere during the travel of retracting.

Edited by Rackumrack
Transient Senior Enthusiast

Transient

Posted
  • Author
Posted
I have a RETRAX and really like it.  I do not like the room it takes up at the front of the bed next to the cab but I understand that is the trade off for a roll up cover, it has to go somewhere.  I think roll-n-lock may not be as deep for the cover storage but I have no issues with the RETRAX.  I have the polycarbonate model, not the aluminum.  I have no issues with leaks.  If it comes a really hard rain I get a slight leak on the edges where the cover meets the tailgate.  It's very minimal I would not have an issue putting luggage back there during a hard rain.  We don't get much snow in SC so I can not attest for standing snow.  I think you will be happy with either the RETRAX or Roll-n-Lock compared to what you have.  You get a lot me versatility due to being able to lock the cover anywhere during the travel of retracting.
Thanks for the reply. I'm not concerned about the space the canister takes up at the front of the bed. With the sport bar that space is pretty much useless anyways. Can't sit in a camping chair all the way back there due to head clearance and the side panels making it impossible to see.

As for snow, that's not currently an issue due to living in San Diego, but that doesn't mean I shouldn't throw caution to the wind. I (meaning my wife) have been stationed in Chicago, Philadelphia, and Norfolk, VA throughout her career. I'm also from Salt Lake City. Therefore, snow is a reality later on down the road. The Roll-n-Lock is advertising a 500 lbs weight limit on top. I'll look more closely at the Retrax. One thing I'm leaning towards right now is mounting a rooftop tent on top of the tonneau cover via the Thule crossrails. With the ability to pack food, bedding, campfire supplies, and maybe an outdoor shower in the bed of the truck, I can make the Trail Boss a solid camping option. My neighbor has been asking me to go to Superstition Mountain with his family on an almost weekly basis (when his Custom TB isn't in the shop).

I'll take a look at Retrax and see what they are offering.

Sent from my SM-N960U using Tapatalk

redwngr Senior Enthusiast

redwngr

Posted
Posted (edited)

I'm on my second RetraxONE MX.   https://retrax.com/retraxone-mx

GM decided to change the standard box size between '18 HD and '21 LD or I would've transferred the first one to this truck. 

 

MX is the manually operated one, with poly slats.  I figured if there is a scratch if wont' as easy as the coated aluminum slats. Of course it's also cheaper. 

Not sure how it would fit around a sport bar.

 

I find walking beside the truck pulling/pushing the latch handle makes for easier opening than trying to fold the panels on a folding one I had on 15 thru 18 standard bed trucks. 

Also nice that it will retract without opening the tailgate, and tailgate will open without opening the cover.

It doesn't matter which is closed first. The folding one I had it was necessary to have the last fold lifted when closing the tailgate, and the tailgate had to be open to unlatch the cover for folding. 

It has a key lock in the latch.

Edited by redwngr
Transient Senior Enthusiast

Transient

Posted
  • Author
Posted

I've been doing a lot of research on which way to go with this  Every option has its pros and cons.  I was about to pull the trigger on a powerfold one that has the side rails for the Thule crossbars so I could install a roof mount tent over the bed.  But, when I did the math and then the measurements to see if it would work, it turned out it won't, so anything with the side rails for the crossbars is out.  Besides, I probably would've had to modify the side rails to make it work with the sport bar.  I was prepared to do that. 

 

Then, I started looking at the manually operated Retrax MX, but after measuring the side of the sport bar where it mounts to the bedside, I determined that wouldn't be a good idea either.  The sport bar is almost 4 feet long.  Even though the canister for the Retrax is about a foot forward from the front of the bed, it's still not close enough to reach around the sport bar and grab it to close.  This brings up the curiosity of modifying it, ie, could I mount one end of a strap to the end of the Retrax MX so I could pull it closed from the back of the truck, with the tailgate closed of course?

 

If easily installing a strap isn't viable, there is the remote operated power open/close version.  I'm confident I could handle the install.  Seems a lot easier than installing the upfitter switches.  I hate to spend $700 more for the powered version, but it seems like this may be the required direction to go.  I'll either use double-sided tape to mount one of the fobs onto the sidewall of the truck bed, are eliminate the remote signal receiver and mount switches inside the cab and inside the truck bed.

 

What are your thoughts on what I should do here?

Rackumrack Enthusiast

Rackumrack

Posted
Posted (edited)

With the sport bar being an issue I would opt for the power.  I just saw how the sports bar is made and it would pose quiet difficult to reach around and grab the manual handle with the height of the truck, unless you are 8' 6"! 😅 I will look when I get home to see if there is a  location to attach a lead to pull the Retrax shut unless someone can chime in before then.  I think you will be very happy with the cover.

Edited by Rackumrack
BossTaco2020 Enthusiast

BossTaco2020

Posted
Posted

I have the Roll-n-Lock M-Series on my 2020 TrailBoss. Love the looks and the canister box isn't too bad. I can still fit crap underneath it and bikes and such haven't been a problem when throwing them in my bed. Only thing I've had an issue with is the latch that locks it into place sometimes unlatches itself. It's like the locking bar gets wiggled loose by bumps and stuff on the road and it unlatches and rolls up to the next stop. Personally I think it's an installation issue as I had it installed by the dealer. I tried adjusting it but couldn't really change much. It doesn't happen much now, but I find myself constantly looking back to see if it's unlatched itself. Kind of annoying and it was a bit pricey. I probably would have been good with the ole folding tonneau covers I've used in the past.

Transient Senior Enthusiast

Transient

Posted
  • Author
Posted

I found a local authorized dealer for both Retrax and Roll-n-Lock.  Looking at their website they have a Retrax on display.  Hopefully the same can be said for the other brand.  My schedule is busy, and I'm trying to find an opportunity to go to the dealer and see what they have.  Leaning towards a powered Retrax with the poly finish. 

Charles Eline New Member

Charles Eline

Posted
Posted

I have the retrax and a roof top tent and freaking love it! So much so that I created an account just to reply to you! Here is my current setup...

 

swiilnjb49n61.jpg?width=1334&format=pjpg&auto=webp&s=63462a26f2b0ca5318f145463a775dfb3e5dd684

 

Parts list:

  • Retrax MX Pro Aluminum bed cover
  • 60" Yakima HD Crossbars and towers
  • Roofnest Falcon XL

The wife and I are avid outdoors people. We bike, hike, camp, climb, and paddle board. My old GMC tri-fold cover and tent were both destroyed in a 50+ MPH sand storm that turned into a snow storm last year in Colorado. So I took the opportunity to upgrade. My only regret is not doing it sooner. The cover is amazing. It takes up a little space at the front but its not bad. It's not 100% water and dust tight but its still better than the old trifold. The cross bars are super solid and silent. And the tent is the best part. It's super comfy, very easy to setup\breakdown, gives us a ton of room back in the bed, and only costs about 1/2 a mpg when its on the truck. Only down sides are you can't keep bedding in that particular tent and having 200lbs up that high does mess with the trucks COG. I HIGHLY recommend going this route if you're into camping.

  • Like 2
Charles Eline New Member

Charles Eline

Posted
Posted

Forgot to mention, the ONLY down sides to the cover are you have to drill small holes in the front of the bed for the drains and the lock core for the bed cover is not compatible with Yakima's SKS cores. I reached out to Retrax and they confirmed it.

Transient Senior Enthusiast

Transient

Posted
  • Author
Posted
On 4/29/2021 at 6:19 AM, Charles Eline said:

I have the retrax and a roof top tent and freaking love it! So much so that I created an account just to reply to you! Here is my current setup...

 

swiilnjb49n61.jpg?width=1334&format=pjpg&auto=webp&s=63462a26f2b0ca5318f145463a775dfb3e5dd684

 

Parts list:

  • Retrax MX Pro Aluminum bed cover
  • 60" Yakima HD Crossbars and towers
  • Roofnest Falcon XL

The wife and I are avid outdoors people. We bike, hike, camp, climb, and paddle board. My old GMC tri-fold cover and tent were both destroyed in a 50+ MPH sand storm that turned into a snow storm last year in Colorado. So I took the opportunity to upgrade. My only regret is not doing it sooner. The cover is amazing. It takes up a little space at the front but its not bad. It's not 100% water and dust tight but its still better than the old trifold. The cross bars are super solid and silent. And the tent is the best part. It's super comfy, very easy to setup\breakdown, gives us a ton of room back in the bed, and only costs about 1/2 a mpg when its on the truck. Only down sides are you can't keep bedding in that particular tent and having 200lbs up that high does mess with the trucks COG. I HIGHLY recommend going this route if you're into camping.

Charles, thank you for posting up.  I went to the local Retrax dealer I mentioned previously to take a look at the Retrax covers.  They believe there is going to be an issue with the setup I'm considering due to the sport bar I have, and want to keep.  They are investigating whether or not a modification would work.  For the time, I'll standby.  Do you have any pics of the Retrax along the bed rails?  That's where all the concern is right now. 

Transient Senior Enthusiast

Transient

Posted
  • Author
Posted
On 4/26/2021 at 1:00 PM, BossTaco2020 said:

I have the Roll-n-Lock M-Series on my 2020 TrailBoss. Love the looks and the canister box isn't too bad. I can still fit crap underneath it and bikes and such haven't been a problem when throwing them in my bed. Only thing I've had an issue with is the latch that locks it into place sometimes unlatches itself. It's like the locking bar gets wiggled loose by bumps and stuff on the road and it unlatches and rolls up to the next stop. Personally I think it's an installation issue as I had it installed by the dealer. I tried adjusting it but couldn't really change much. It doesn't happen much now, but I find myself constantly looking back to see if it's unlatched itself. Kind of annoying and it was a bit pricey. I probably would have been good with the ole folding tonneau covers I've used in the past.

I was able to look up the install instructions for the Roll-n-Lock.  It's a no-go, unless my is incorrect.  Installation requires use of the hole in the bed wall fitfully under the front stake pocket that has the round plug in it.  The sportbar from GM Accessories that I have on my truck already occupies that space.  I do not see a way that both the sportbar and tonneau cover canister can use that space together. 

swathdiver Senior Enthusiast

swathdiver

Posted
Posted
On 4/23/2021 at 6:13 AM, Transient said:

 

My truck has the short bed. It also has the GM sport bar. I've been running the Rough Country hard trifold tonneau since I bought the truck. It works great! There's nothing wrong with it. As several ex-girlfriends have told me, "It's not you. It's me." That really is the case in this situation.

 

I wrote the book on social distancing before COVID ever became a thing. At my kids baseball practices and games I prefer to sit in the bed of my truck in a lawn chair and watch everything. I hate being around others. Problem is, I'm in Kommiefornia, and social distancing is still required. This means my wife now wants to sit in the back of the truck. She said it's the best seat at the game. However, with the sport bar the trifold cover I currently have only allows the first part of the cover to be opened. I'm now thinking about a retractable cover.

 

I've been looking at the various retractable covers, such as Embark Max by Advantage and the retractable cover by Roll-n-Lock. I'm curious what has and hasn't worked for others in the past and present? I'm considering power open/close models, but if they are a PITA to maintain functionality then i don't mind going with manual operation. The sport bar mounting flanges take up almost the entire width of the top plastic cover of the bed walls, so the tonneau cover weather gasket overlap is very important.

 

If everybody could share their opinions, experiences, thoughts, etc it would be greatly appreciated. Thanks in advance.

 

Sent from my SM-N960U using Tapatalk

 

 

 

Our Sierra came with a Truxedo roll up cover.  Been on for about ten years and still looks great and doesn't leak.  It's the Lo Pro model I believe.

 

 

Transient Senior Enthusiast

Transient

Posted
  • Author
Posted
18 hours ago, swathdiver said:

Our Sierra came with a Truxedo roll up cover.  Been on for about ten years and still looks great and doesn't leak.  It's the Lo Pro model I believe.

 

 

Thanks, but I have my concerns about those types of covers.  Particularly security.  I'll often have firearms and ammo in the back of truck, in addition to the half dozen that are already in the cab.

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts

  • Member Statistics

    342,894
    Total Members
    8,960
    Most Online
    TopBo
    Newest Member
    TopBo
    Joined

  • Who's Online   0 Members, 0 Anonymous, 621 Guests (See full list)

    • There are no registered users currently online

  • Latest Articles

  • Posts

    • davester
      New to Me 2010 SLE (Quirks, Issues)

      By davester · Posted

      not all plugs will be used.  gm uses more generic harnesses that support most/all options, and if your truck doesn't have a specfiic option, the plug won't be used (commonly will have a dummy insert in the plug , or it'll be taped up, but some may just be left as is).  But it's sldo possible some p.o. has installed the wrong/cheaper parts that aren't correct for your vehicle...
    • fm2176
      New to Me 2010 SLE (Quirks, Issues)

      By fm2176 · Posted

      First off, I'm not trying to just get easy advice/fixes for the issues I've noticed so far.  I'll be combing through the site via searches and such, and if past experiences are any indication, should find what I need.  For the sake of conversation, though, I figured I'd post the handful of things I've noticed in the 12 hours since buying my 2010 SLE CCSB.     Indicator lights: Airbag and TPMS.  The tire pressures aren't reading for any of the wheels, so I'm pretty certain the sensors were either removed, are damaged, or are otherwise inoperable.  I used to mount and balance tires 25 years ago but am pretty much ignorant when it comes to TPMS.  My 2006 didn't have the sensors and this might be the fourth vehicle I've owned that does.     Radio: Rear speakers aren't working.  I removed the driver's side rear door panel and checked the speaker and wiring.  I also removed the sill and b-pillar covers to check the wiring.  A few minutes of Google Fu showed that this is potentially a head unit issue.    Switches: Power mirrors don't turn left/right.  I ordered replacement driver's door switches that should arrive tomorrow.  The windows and locks work but it was only about $20 for all of them.  The driver's side rear window switch lets the window down but won't put it back up.  I think the passenger rear doesn't work at all.  In the coming days/weeks, I'll break out my multimeter to check all of that.   Unknown wiring harness: There's a box attached to the front driver's side of the engine compartment, right where the second battery shelf is located.  There are three plugs, one of which looks like it fits a standard headlight-style bulb (9007 or similar).  It doesn't look like it's plugged into anything.  I'll do some digging and if I don't see anything elsewhere on the site, post some pictures here.   Unknown plugs on brake booster: There are at least two female plugs on the brake booster that aren't being used.  I think it might be a replacement/aftermarket, so maybe those are used for a different application, as there don't seem to be any unplugged harnesses and no indicator lights are on.   Little squeaks when turning: Sounds almost like a bushing around the bed of the truck.  I'll have to pay close attention as I get more familiar with the truck.   Clunk on acceleration: possibly the infamous drivetrain clunk.  My 2006 had it and I'm just not familiar enough with this truck yet to fully grasp what it is.   Anyway, my apologies for the vague and all over the place post.  This truck is new to me, and it's been four years since I drove my 2006.  With 200k miles, I know I'll need to learn this truck quickly to avoid having any major issues, despite being confident it's got much more life to it.  My 2006 had nearly 320k on it when I parked it (nearly 300k of which I put on the truck), and it was still drivable then, though I suspected the head gasket might have blown.  I'd hoped to have that truck back by now, but it's gone forever, as I detailed in my reintroduction thread.  
    • lowrider
      Range RA007 DFM Module

      By lowrider · Posted

      I always drive in Sport mode. With more driving, I am finding the initial response when accelerating is much quicker now🖕 Lou
    • Tyler Gibbs
      2022 2500HD with a new RSI SmartCap

      By Tyler Gibbs · Posted

      Is it an optical illusion in the pic or is the truck really squatting that much horribly?
    • fm2176
      It's Been a Long Time...

      By fm2176 · Posted

      My initial introduction was here.  It's hard to believe that I last posted in February 2013, having just deployed to Kyrgyzstan.  Since then, I've retired from the military and the 2006 Sierra SLT Z71 that first brought me to these pages was lost.  I went forward to Afghanistan in March 2013 and did a lot of sitting behind a computer on brigade staff.  Within 18 months of getting back to the States, I was selected for Drill Sergeant duty, after which I moved back to Virginia (my home state and where I served from 2004-2008).  That '06 Sierra did a lot of driving between Louisiana, Georgia, and Virginia, and ended up with nearly 320k miles by 2022.  By then, the registration had been expired for a couple of years, but the pandemic had all but eliminated tickets for such transgressions.  Admittedly too, I usually drove my wife's SUV or son's car the 2-3 times a week I had to report to work.  Teleworking sure was fun while it lasted.   I started my retirement leave four years ago and stored the Sierra at my sister's house.  A big mess was made when her fiancé passed while she was taking care of business out-of-state in late-2024, and his son pretty much mismanaged everything to do with the estate.  Even so, I was assured that my truck was safe... until it wasn't.  I found out that my truck had been scrapped about four months after the son took over everything.  There's nothing I could do; I'm 1000 miles away and it was technically abandoned property since he'd even trespassed my sister from her own house (she had no claim to it as she wasn't married, and the fiancé was the sole owner).     Anyway, today I got my second Sierra.  This is a 2010 SLE 2WB CCSB with a little over 200k miles on it.  It's got the 5.3L I'm familiar with and should handle what I need it for.  Hauling stuff that won't fit in the Transit Connect (yep, I sold out, but that's the wife's vehicle) and towing a few times a year tops.  The price seemed decent, considering how much people sell their trucks for in the Deep South: $4500.  I've seen similar trucks listed for more than double that.  I got it from a coworker who left his tag on until we transfer the title next week (Louisiana requires a notary for transfers), so I've been driving it all day.  The rear speakers don't work, which is one of the things that brought me back to these forums earlier.  I can't say how active I'll be as a poster, but I'll be scouring the archives while I find out every little thing I can about the 2010s and particular nuances/problems with my truck.   It's definitely not a GMC, but I got another Willys Jeep a few months back as well, so I'm almost at the same place I was when I first joined gm-trucks.com.  My old 1960 DJ3A was sold back around 2010 or 2011; my current Jeep is a 1946 CJ2A.  So, I've got a slightly newer GMC and a much older Jeep.  I kind of wish I still had that F-250 I had way back when too.  The Dakota is long gone and was technically my brother's truck, though I had it registered and insured.  The F-250 had to go when my grandmother's house was foreclosed on due to mismanagement around 2012 or so.     Hopefully anyone that made it this far isn't too annoyed.  I tend to be long-winded, but I'll be doing more reading than posting in the coming months.

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...