Jump to content

2019 5.3L ECOTEC3 V8 Silverado Engine Tick/Chirp

RSVolcom
 Share

Recommended Posts

RSVolcom Enthusiast

RSVolcom

Posted
Posted (edited)

Just wanted to through it out for you to hear for input.  Just starting hearing this noise Friday when I picked up my daughter from daycare.  Didn't drive it all weekend & dropped it off at the dealership this morning.  Basically making a Tick/Chirp .

 

This just started friday afternoon.  I did not hear it Friday morning when I am loading my daughter it or over the days prior to that.

 

Adding the videos for you to hear this & give thoughts on the possible scenarios.   Thank you for any ideas.

 

Video 1.movVideo 2.mov

Edited by RSVolcom
RSVolcom Enthusiast

RSVolcom

Posted
  • Author
Posted

No luck on of this afternoon on the diagnostic report from the dealers tech team at Simpson in Lake Forest CA.  

newdude Senior Enthusiast

newdude

Posted
Posted (edited)

Lifter and possible bent rod.  Sounds like that if its not that, its a bad cam.  Probably has a trashed lobe.  

Edited by newdude
RSVolcom Enthusiast

RSVolcom

Posted
  • Author
Posted
On 10/5/2021 at 12:54 PM, newdude said:

Lifter and possible bent rod.  Sounds like that if its not that, its a bad cam.  Probably has a trashed lobe.  

Just spent a hour with the Tech/Manager.  Based on my two videos, in their eyes it the lifter.  However since they can not duplicate it or get a code issued, I am basically out of luck.  Drove it of the lot & will drive it until it finally seizes up of I hear heaver clunking going on.  At 48k right now, under warranty until 60k so basically a year left.  

 

Supper bummed since they even stated they agree what it is but hands are tied with cooperate.  

 

So it's not a if, it's a when I go back with it.

newdude Senior Enthusiast

newdude

Posted
Posted
27 minutes ago, RSVolcom said:

Just spent a hour with the Tech/Manager.  Based on my two videos, in their eyes it the lifter.  However since they can not duplicate it or get a code issued, I am basically out of luck.  Drove it of the lot & will drive it until it finally seizes up of I hear heaver clunking going on.  At 48k right now, under warranty until 60k so basically a year left.  

 

Supper bummed since they even stated they agree what it is but hands are tied with cooperate.  

 

So it's not a if, it's a when I go back with it.

 

 

Man, they gave you a line of BS right there.  When they had it they couldn't get it to make that noise?  If it starts doing it again, take it while its doing it and have them listen right then and there.  

RSVolcom Enthusiast

RSVolcom

Posted
  • Author
Posted
19 minutes ago, newdude said:

 

 

Man, they gave you a line of BS right there.  When they had it they couldn't get it to make that noise?  If it starts doing it again, take it while its doing it and have them listen right then and there.  

Trust me I'm upset, I do not have the time for this at all.  Just found out my dad has terminal pancreatic cancer stage 4 when I heard this noise & was headed to the ER to visit him.

 

The video I posted here was loud & clear Friday night.  Didn't drive it all weekend.  When I dropped in of to them Monday morning, it wasn't making the noise for me as well.  Even after the 30 minute drive to the dealership.  

 

They've had it for 3 days now trying to replicate.  Watching it all on my app to see if they are starting/stopping the vehicle throughout the day.  I was with them in the back for an hour this morning.  Even drove it for about 15 minutes with the tech.  3 of them were right their when we returned, still no noise.

 

Got back to work, still nothing with it.

 

I'm sure it will hit tonight when I pick up my daughter from daycare.  

RSVolcom Enthusiast

RSVolcom

Posted
  • Author
Posted

Well that didn't take long at home.  5 hours after I picked up my truck, I tried to drive to pick up my daughter.  Pulled out, drove up a little hill is what I would call it & all hell broke loose.  Sounded like a hammer hitting my engine & every light went on my dash board.  Engine basically gave out.  

 

It's back at the dealership & the team is reviewing.  Very helpful last night & stayed after hours to help me get it checked in & into a rental.  

 

Lets see what comes back.  Regardless if its lifters or more (probably is) things are on back order for 1.5 months.  

Sjwoei Enthusiast

Sjwoei

Posted
Posted

There’s huge lifter problems with these your cam is almost certainly fine. If the pushrod bent and is hitting the side of the head it will sound really bad. 

RSVolcom Enthusiast

RSVolcom

Posted
  • Author
Posted

Lifters failed.  Have not told me what ones or side.  Asking for all 16 to be replaced since we all know I'll be back after they just replace the failed ones.  Looks like I'm in a Rav4 for a few months.  Bright side of things only $45 vs $85 to fill my truck.

 

RSVolcom Enthusiast

RSVolcom

Posted
  • Author
Posted

Update, 1 Lifter failed, passenger side bank 2.  No bent rods as of now.

 

Parts on back order including lifters & head gasket.  

 

Living in CA, I see the over 100 container ships waiting to port from PCH.  Going to be awhile for this repair to be completed.

RSVolcom Enthusiast

RSVolcom

Posted
  • Author
Posted

Received a call from the service director yesterday stating that the parts are in & my truck should be completed (not using the word fixed.) by next week.

 

  • Like 1
RSVolcom Enthusiast

RSVolcom

Posted
  • Author
Posted

Update as of this morning.  Just received the below from the Service Department. 

 

Good morning, I just spoke to the technician and he informed me, that he has to order a camshaft. He said that the procedure that GM makes them go is piece by piece.
This what they make them do.  I will keep you posted.

 

So I replied with this.  Thoughts?

 

That's disappointing considering the tech more than likely diagnosed the camshaft needed replacement with his initial review & diagnose. 

Just want to confirm.  Lifters along with Head Gasket were confirmed damaged on initial tech review & these parts were ordered/received per our text correspondence on 10-19-2021.  With possible completion this week. 

With today's update the camshaft will now need to be replaced & part ordered.  

With this being mention after this step there is a likely high percentage that a new part may identified as damaged & need to be replaced for example a rod after the camshaft is replaced. 

Is it possible that the parts that were ordered & are currently on hand for my vehicle needs may now be utilized for another vehicle in need for repair hence extending the repair time of my vehicle?

I do understand GMs SOP, but to see parts are now only being identified as approved to replace now is somewhat unacceptable.  

I do understand this is out of both yours & the techs hands at this time.  Thanks again for providing all of the details.  I appreciate it. 
 

 

 

  • 2 weeks later...
RSVolcom Enthusiast

RSVolcom

Posted
  • Author
Posted

Month update today.  

 

Was told at the beginning of the week, that the tech believes that my truck will be completed by tomorrow Friday.  Not holding my breath but hopping for it to happen.  

 

Turned in my rental today & received a loaner truck from the dealership.  At least I have truck for my camping trip coming up in a few weeks regardless.

 

Still super disappointed that others on this forum have had the repairs completed in a week while mine is not at a month due to part availability.  OK, it is what it is.  Dealership has been great with keeping me updated daily regardless of the long delay in completing the repair.

 

  • Sad 1
KARNUT Senior Enthusiast

KARNUT

Posted
Posted (edited)

I was at my local Hyundai, GMC dealership this week for service. I commented to the parts guy after seeing they seemed pretty stocked with cars. Doesn’t look like they were adversely affected. His comment was they can’t get parts like there’re use to. Went to Sams to pick up some new glasses today. We decided while there to check out IPads. My wife’s recently stopped working. They didn’t have a single one. Shopping season Is fast approaching. It appears it’s going to be a lean one. Let’s go Brandon.

Edited by KARNUT
  • Like 1
RSVolcom Enthusiast

RSVolcom

Posted
  • Author
Posted (edited)

Just picked up my repaired truck.

 

Passenger side lifter failed on cylinder 3.

 

Replaced all 8 lifters on passenger side.

Replaced 1 damaged push rode.

Replaced 1 damaged camshaft.

Along with some bolts, plugs, gaskets, & so on.

 

Covered by warranty.  All said & done probably around 10,000. with over a month of rental car charges.

 

As of now, very happy with the repair & both the Service Director & main tech that worked on it were great to deal with.  No issues on customer service at all.  I understand SOPs & with delays it parts it was what is was.

 

Oh, also replaced my leather steering wheel that was started to tear.

 

Edited by RSVolcom

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • asilverblazer
      Intermittent no-code issues on 2022.5+ V8 trucks — what did the shop fail to capture?

      By asilverblazer · Posted

      Length/amount of data capture will be important to consider, sifting through 5 minutes of a data log can be enormous when it is stored in milliseconds. Being able to find the 'event' let alone decipher it.   Presumably the driver would notice something and hit a button to capture the 'window' of data. That window has to be large enough for the operator to recognize the event and react accordingly.    The data has to be able to be retrieved easily.   The data has to be able to be understood. Which is the biggest challenge, dealer techs won't even know what most of it is and would likely not even look at it if an owner brought it to them. Meaning the owner, the least educated/qualified, trying to understand it.    How will the data be presented? Could specific PIDs be selected and a timelapse graph be watched? How will a specific value be noted as abnormal? Additionally, a good data logger would be able to 'learn' normal values for a specific vehicle and flag abnormalities automatically. It could in theory watch parameters degrade over time and suggest maintenance as needed. (If the MAF reading begins tapering off for a given set of other readings - MAP, throttle position, Ambient, etc.. a flag to check air filter.) With the amount of data available, a device (really the vehicle rather than an additional accessory) should be able to do more than issue a DTC. It should be able to run the full diagnostic suite automatically and present a solution rather than a code. (It's not the 90's anymore). The technology is available for the vehicle to not just say "P0087", it should know low fuel pressure, check other PIDs to narrow down the problem itself, and determine if it is a lift pump, high pressure pump, regulator, leak in the fuel line, clogged filter, etc. Even if it can't narrow it down, it should be able to guide the user to the likely problems.   This would be a major problem for dealer service departments, which are the manufacturers customers it is in their collective best interest to NOT have this available to the consumer.   Further, if the owner is going to be the primary consumer of the data, it's got to be at a consumer price point vs. dealer only specialty tool price.   This group is more 'involved' in their vehicle than general public/consumer and will have knowledge, experience, needs and desires that are quite different from the market at large.   
    • KARNUT
      OCI, not when but why?

      By KARNUT · Posted

      I put the prof up. If you read what I posted. You can see that housing, cars and income are in line with the era we were talking about. It’s harder in some places easier in others. Let’s agree to disagree and put this back on track, OK? We both are pretty stubborn and hard headed. But I bring receipts. If you wish I will not respond to you in the future. 
    • Grumpy Bear
      OCI, not when but why?

      By Grumpy Bear · Posted

      Lets see if I can sum up two pages of nothing useful.    You want to refute your own governments data of the "Purchasing Power" Index FOR THE ENTIRE USA and its territories replacing it with the experience of a single family and its business and label that reality?  Then pound on that for a week hoping it will find traction?    Stan, I've told you several times. I don't do irrational. There are more people in the USA than your family.    I'm pretty sure this tread is so blown up. I'll give you a few days or months if need be to post yourself silent then I'll see if I can find enough parts of the train to reassemble it. 
    • asilverblazer
      VSE CCV Bypass - Anyone have this installed in their L5P?

      By asilverblazer · Posted

      Facebook groups hate VSE, poor customer service; their responses to criticisms are pretty poor for a reputable company. I'm not a customer, haven't bought anything from them, but how they handle themselves on social media is a definite "No" for me. 
    • asilverblazer
      Transmission Woes :-(

      By asilverblazer · Posted

      $10,000 for a transmission?   Pretty sure I could buy all the parts, tools, and education to rebuild it myself for a quarter of that amount.   or swap it out with a new one...

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...