Jump to content

Park Assist

Phantom 4D
 Share

Recommended Posts

Phantom 4D Enthusiast

Phantom 4D

Posted
Posted

I know there have been some other topics on this. Here goes anyway. For the past two months, whenever I put the truck in drive I get the park assist blocked. When I start the truck the park assist button is lit. As soon as I put it in drive the light goes out and parks assist blocked shows. Here's the rub, yesterday the light stayed on and park assist worked fine. It was raining. Today, clear skies, the block message comes up. I have checked everything at least twice. Front and rear sensors are clean. No noticeable damage. All cameras work. 

So, why does it work in the rain and not on clear days? Anyone else having problems? I called and talked to the service manager at the dealer. Standard answer, we haven't seen this problem. Dealer is 3 hours round trip. Guess I have to make some time to take it in.  

  • 3 weeks later...
woychc Enthusiast

woychc

Posted
Posted
On 4/19/2022 at 7:22 PM, Phantom 4D said:

I know there have been some other topics on this. Here goes anyway. For the past two months, whenever I put the truck in drive I get the park assist blocked. When I start the truck the park assist button is lit. As soon as I put it in drive the light goes out and parks assist blocked shows. Here's the rub, yesterday the light stayed on and park assist worked fine. It was raining. Today, clear skies, the block message comes up. I have checked everything at least twice. Front and rear sensors are clean. No noticeable damage. All cameras work. 

So, why does it work in the rain and not on clear days? Anyone else having problems? I called and talked to the service manager at the dealer. Standard answer, we haven't seen this problem. Dealer is 3 hours round trip. Guess I have to make some time to take it in.  

I'm having the exact same issue.  The park assist on these trucks has always been crap.  I had a rear harness replaced a few weeks ago, and it worked for a couple days, now the same thing you said above is happening to mine.   I've reached out to my service advisor, I'll report back if i find a fix 

Phantom 4D Enthusiast

Phantom 4D

Posted
  • Author
Posted
On 5/5/2022 at 2:57 PM, woychc said:

I'm having the exact same issue.  The park assist on these trucks has always been crap.  I had a rear harness replaced a few weeks ago, and it worked for a couple days, now the same thing you said above is happening to mine.   I've reached out to my service advisor, I'll report back if i find a fix 

Thanks. Just saw this. I talked to the service manager at the dealer where I bought the truck. Of course I got the standard answer " We haven't seen any issues with park assist. Your sensors are probably dirty. I told him I cleaned them and it still won't work. I'll have to take it in when I get time. The dealer is 3 hours round trip. 

  • 4 weeks later...
woychc Enthusiast

woychc

Posted
Posted
On 5/9/2022 at 1:12 PM, Phantom 4D said:

Thanks. Just saw this. I talked to the service manager at the dealer where I bought the truck. Of course I got the standard answer " We haven't seen any issues with park assist. Your sensors are probably dirty. I told him I cleaned them and it still won't work. I'll have to take it in when I get time. The dealer is 3 hours round trip. 

just wondering if you've had any luck with this issue?  I'm still fighting it.  

Byrds8 Enthusiast

Byrds8

Posted
Posted

I have had issues with my randomly turning themselves off. I asked them to look into it and got the standard, "Cannot duplicate." Much like steering wheel controls stop working with CarPlay or CarPlay just blacks out lol. These days it seems like if it doesnt give them a light/code then they dont know how to find the issue.

Phantom 4D Enthusiast

Phantom 4D

Posted
  • Author
Posted
21 hours ago, woychc said:

just wondering if you've had any luck with this issue?  I'm still fighting it.  

I haven't been able to get to the dealer. I talked a friend who is a Chevy tech and he said there is a problem in the module. So, as soon as I get time, I'm going to take it to the dealer. 

 

  • 2 weeks later...
woychc Enthusiast

woychc

Posted
Posted
On 6/2/2022 at 10:45 AM, Phantom 4D said:

I haven't been able to get to the dealer. I talked a friend who is a Chevy tech and he said there is a problem in the module. So, as soon as I get time, I'm going to take it to the dealer. 

 

I have finally got mine fixed.  Dealer had to put in a new park assist module, which then gave them an error code for a front sensor.  Once they replaced the front sensor, all works fine now.  Good Luck

Byrds8 Enthusiast

Byrds8

Posted
Posted

They just gave me the standard, "Cannot duplicate." So mine still cut off randomly lol.

redwngr Senior Enthusiast

redwngr

Posted
Posted

I think this is the 4th truck we've had with park assist.

 

Haven't had issues with any of them.

 

Of course when sensors are covered with dirt/mud/snow/ice etc, the don't work.  

Clean 'em off and good to go.

 

Or go old school...

Phantom 4D Enthusiast

Phantom 4D

Posted
  • Author
Posted
21 hours ago, redwngr said:

I think this is the 4th truck we've had with park assist.

 

Haven't had issues with any of them.

 

Of course when sensors are covered with dirt/mud/snow/ice etc, the don't work.  

Clean 'em off and good to go.

 

Or go old school...

Mine are clean. still have issues.

Phantom 4D Enthusiast

Phantom 4D

Posted
  • Author
Posted
On 6/16/2022 at 9:14 AM, woychc said:

I have finally got mine fixed.  Dealer had to put in a new park assist module, which then gave them an error code for a front sensor.  Once they replaced the front sensor, all works fine now.  Good Luck

That's good news. Taking mine in next week. 

 

redwngr Senior Enthusiast

redwngr

Posted
Posted
6 hours ago, Phantom 4D said:

Mine are clean. still have issues.

Which probably means a sensor or wiring needs to be repaired/replaced. 

 

I was just trying to let you know that it is not 'normal' for clean sensors to not function correctly, and also not typical that they need to be serviced. 

 

Good that you're taking it in.

  • 5 weeks later...
Denali_956 New Member

Denali_956

Posted
Posted
On 6/17/2022 at 10:39 AM, Phantom 4D said:

That's good news. Taking mine in next week. 

 

Did you ever get it fixed? Ive been having the same exact issues and havent been able to get it resolved.. going on 2 months now and sensors havent worked what so ever.. please let me know of any possible solution.

Phantom 4D Enthusiast

Phantom 4D

Posted
  • Author
Posted
9 hours ago, Denali_956 said:

Did you ever get it fixed? Ive been having the same exact issues and havent been able to get it resolved.. going on 2 months now and sensors havent worked what so ever.. please let me know of any possible solution.

Not yet. Due to health issues and appointments, I've had to cancel my appointments with the dealer. I'm hoping to schedule it in this week. 

 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • Gkistler
      2015 Sierra Denali L86 cyl 5 misfire at idle

      By Gkistler · Posted

      Hi friends - first time poster. I have a 2015 sierra Denali with 150k miles, I’m the second owner and she’s given me 75k of great service. I run a pulse AFM disable device. Starting Thursday when I exited the freeway after a short local ride it started idling rough, with an obvious misfire shake and was down on low end power.  I got it home and hooked it up to my scannner and found no codes but in live data a pretty bad misfire on cylinder 5. I replaced the coil, plug and wire with all new OE replacements (Delphi gn10165 coil, acdelco wire and 41-168 plug). It’s still behaving the same way after firing the parts cannon at it.   I know cyl 5 is a non AFM cylinder so I am not thinking this is AFM related but I’m kinda at a loss. injector? Bent pushrod? It’s running too well over 1k rpm to suggest those IMO. Has anyone chase this issue before and what was it? Any suggestions? 
    • zibzer2
      Pulsating Noise 4Cyl Mode

      By zibzer2 · Posted

      2017 Silverado L83 5.3l 6speed transmission Hello, not a new member but havent posted in a while and my old signup info isnt working so had to create a new account. anyways, I have an issue with my truck and hope someone can spread some light on whats happening: -when it goes to 4cyl mode it makes a clunk sound (but not when coasting or going downhill) -when in 4 cyl mode and under load it makes a load pulsating sound (not a tick). -goes away completely when in M5 gear or when plugging in an AFM delete. Im guessing it is one of 2 things but im not convinced of either to be honest. 1. lifter stuck in v8 mode 2. torque converter shudder realistically it doesn't seem like the TC as there is no physical vibration , and it never happens in v8 mode. but maybe? and wouldnt a lifter make a sound whether with load or not? any ideas let me know please. thank you!  
    • Chuck FB
      Some Assembly is Required

      By Chuck FB · Posted

      Which has made me wonder with the various engine failures of a few brands in the last few years, is it sub par materials such as lifters etc causing failures, or bearing clearances on the crank etc or perhaps bad designing of an engine physically or causing too much load on the components due to the hp/torque they can push out of them. Or is the oil viscosity and additive package of current oils or a lack of oil flow by an oil pump not able to supply sufficient oil at idle or under high load at low rpm. Or is it every item I listed that combined together has pushed the limits so far to the left that there is hardly a margin of safety left and add in some fuel dilution and too long of an OCI and premature engine failure is the result ?. 
    • Grumpy Bear
      Some Assembly is Required

      By Grumpy Bear · Posted

      He is not saying that an SAE *W20 will have more viscosity than a *W40 due to MORE VII polymers. He is saying that although multiple *W40 may post in the PDS the same or similar 100 C and 150 C viscosities that the blenders choice of modifier TYPE and AMOUNT to get his chosen base to grade will not give identical real world viscosities in shear and at temperature. All will pass the SII test but not all will pass the 100 C HTHS (unpublished value) testing the blender does and relies on to get the required by law "percentage improvement' referenced to his last great work.    Tis the problem with the lie. Once told others are required to support it. 
    • PunchT37
      Parking Brake - Automatic Engagement Questions

      By PunchT37 · Posted

      I have a `25, 1500 that auto sets on incline. Never knew that at first. I have the electronic shifter. Just think if it didn`t do that? Unlike a mechanical shift that you can muscle out of park, how would you get this thing out? That would be a problem.   What I found out later is, I don`t have to push the button to release. Just put it in gear.   Setting parameters? Don`t know if it`s possible.

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...