Jump to content

Recommended Posts

Posted

When I had my 2020 LTZ I had to put some colored wrap on the trim in the center part of the dash and on a few console parts because of the blinding glare when the sun reflected off the chrome pieces. Yesterday I had to drive 200 miles to get my refreshed 2022 LTZ. Was all excited about the new set up but suddenly as I was driving back home an old friend called blinding sun reflection decided to join me in my new truck. Darn trim on the bottom of the radio display area was causing quite the blind spot. Time to order some more Satin Vampire Red wrap (closest match to Cherry red tint coat I could find) or go with Carbon Fiber look. Oh well, still loving the new truck

 

image.thumb.png.e3359cc8d30c5bcbd6d8a2563caba6ba.png

  • Thanks 1
  • 2 weeks later...
Posted
On 5/22/2022 at 3:57 PM, big loser said:

When I had my 2020 LTZ I had to put some colored wrap on the trim in the center part of the dash and on a few console parts because of the blinding glare when the sun reflected off the chrome pieces. Yesterday I had to drive 200 miles to get my refreshed 2022 LTZ. Was all excited about the new set up but suddenly as I was driving back home an old friend called blinding sun reflection decided to join me in my new truck. Darn trim on the bottom of the radio display area was causing quite the blind spot. Time to order some more Satin Vampire Red wrap (closest match to Cherry red tint coat I could find) or go with Carbon Fiber look. Oh well, still loving the new truck

 

image.thumb.png.e3359cc8d30c5bcbd6d8a2563caba6ba.png

I have/had the same problem with mine pre-refresh. The bezels around the vents and the ones at the side of the console got me. I wrapped the ones on the console. 

Posted

I was able to get some clear 3M matte paint protection film to try on Friday but nothing but clouds and rain this weekend. Just put a few inch strip for now to see how it works. I like the factory look just really need to kill the glare. Maybe when this tropical system moves out of south Florida and the sun comes back out I can see how it does.  

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Latest Articles

  • Posts

    • I do have the 8 speed.  Interestingly enough, after driving my truck for the past 2 days now, I have not had the clunking issue at all!  I am beginning to think it may have been suspension/leaf spring related, and somehow when the shop put my truck on the lift to do their initial inspection, it relieved some built up tension/pressure that was causing my problem.  I swear it felt I was a bull rider on a bucking bull the way the truck would almost rock back and forth slightly before the big thud/clunk when coming to a stop.  I am hoping I got lucky here and it's gone for good.
    • Bring it to discount tire. They do free rotations even if you didn’t buy your tires there. I didn’t believe it until I tried and they did. You can tip the employee if you would like 
    • Best part of this video is how it resets expectations. Wonderfully done piece. It also made clear a few points I've made from day one. Detergent oils DO NOT KEEP A MOTOR CLEAN at the recommended or longer change intervals. They just get dirty slower than a non-detergent oil and there isn't spits difference between them on this point if they carry the DEXOS license. Great thing about the license that gets missed is it assures CONFORMITY even it that means a low bar.    One thing he did not talk about that I paused on an magnified was the condition of the oil ring separator. Besides a stuck ring a plugged separator and land drain back is huge when it comes control. We see in short order improvement in control IF that is the problem.    Another item I took exception to and he did not make plain was the condition of the timing chest and under valve cover having something to do with indicating piston cleanliness. Schaeffer's Oil makes that same omission in their million mile Ford video. I'm guessing he has never torn down a Red Line HP, AMSOIL SS motor that has been on that diet from the get. What he showed in the video was a good deal of varnish. Something totally absent in Peppers 165K cover off look. I smiled because he did his at the same milage.    He also makes the mistake of assuming oil temperatures in the pan are the temperature all over the motor even though he makes note of the piston being the hottest part of the engine. that baffled me a bit.    I can tell you from personal experience and witnessing teardowns of family motors that even oils of the 1960's would keep them squeaky clean when OCI's were 1500 to 2000 miles without exception. At 3K and above you get what he experienced and the longer you leave it the quicker to gets to the junkyard.    I think his is missing a opportunity not tearing it down again when he's done killing it. Time would be his only cost. 
    • Very often the part number on the trim part is just for the vendor order/assembly plant and will not show up in the parts system.  They won't make a bunch of extra parts that were not ordered. Keep in mind, lots of these parts were made to be "just in time" parts meaning they were dedicated to a vehicles ordered and sequenced for assembly.       Also, trim parts will often say, paint to match.     
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...