Jump to content

Light bar mount

Jeffy5044
 Share

Recommended Posts

Jeffy5044 Enthusiast

Jeffy5044

Posted
Posted

I have a 19 RST looking for a light bar mount for the bumper/grill. I found zroadz has one but it's 150 bucks. Is there any others out there or have anyone made ones and can show me what they did. I have a 30 in straight led bar from my old truck I wanna use

Jeffy5044 Enthusiast

Jeffy5044

Posted
  • Author
Posted

Mine has the active shutters and I have a 30 inch double row straight bar. Not sure if that will work for me. I really don't wanna mess with the shutters 

nlindste Enthusiast

nlindste

Posted
Posted
1 minute ago, Jeffy5044 said:

Mine has the active shutters and I have a 30 inch double row straight bar. Not sure if that will work for me. I really don't wanna mess with the shutters 

 

Mine has the active shutters too. From what I have read, if I had picked up a curved bar I wouldn't have had to modify the active shutters.  I only had to trim a little bit on the lowest row of shutter.

 

nlindste Enthusiast

nlindste

Posted
Posted
5 minutes ago, Jeffy5044 said:

You think a double row would fit in there nicely

I am not sure if it would fit, because the bracket lines up perfectly with a spot where one of the tabs clip in, the double row would put the bar in the way of the tab in the center.

nlindste Enthusiast

nlindste

Posted
Posted
3 minutes ago, Jeffy5044 said:

I like the look of it and it's like impossible to steal but I don't think my bar will fit in there

There is definitely no way to get it without ripping the grill off.  Yeah the light that you have I really don't think would fit without major modification.

 

  • 3 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • Coastie05
      2027 GMC Sierra: Official Discussion

      By Coastie05 · Posted

      Sure, but they do have some affordable options like the Trax, Trailblazer, Envista, and Encore. Some of these have a cheaper base price than the Civic, though the fuel economy isn’t as high. The main problem is that people WANT the highest trim with all the goodies and finance for like 7 years. That’s how ppl “afford” the more expensive vehicles. 
    • Jsdirt
      07 yukon xl 6.2 stalls at hot idle and wont restart

      By Jsdirt · Posted

      Holy s**t - not much of a parts thrower you say? You BLASTED that thing with the parts cannon!  You'd have been probably $1,000 ahead if you had just brought it to a competent shop rather than shotgunning a bunch of parts it clearly didn't need.   Just FYI - oil additives are really, REALLY good at ONE thing ... and that's emptying your wallet. They're ALL useless gimmicks.   If that has the L94 or L99, then #7 is an AFM cylinder. I'd suspect a failed lifter in that case.   If you leaned on wiring, sensors, and/or connectors while changing the oil, you'll have to check all that to be sure pins didn't get pulled out, connectors broken, etc.. Old wire loom that was barely adequate when new is certainly brittle by year 19 - make sure wires aren't chaffed and shorting out somewhere where you might have leaned. or supported yourself on it.   If your a mechanic, why didn't you just find out what you were missing and troubleshoot from there??  TIMED spark, fuel PSI / injector pulse, air, compression.  Can't make ANY money going the parts cannon route.
    • Jsdirt
      2027 GMC Sierra: Official Discussion

      By Jsdirt · Posted

      LOL! Are you joking?? That wax SUCKS! 100% gimmick made to "look" good.    After just TWO winters I had severe surface rusting in patches over 90% of the frame. Only reason it looks great in the pics is because I SATURATED the frame every single fall with used motor oil for 14 of the 16 years I owned it. Otherwise it would've been sent to the crusher 8 years earlier with the speed it was rusting prior!    I sold that POS 3 years ago. Was a gigantic headache the second it rolled off the showroom floor. Brakes pulsated on the TEST DRIVE. Door trim fell off the 1st week! Interior squeaked and rattled, and the drivetrain clunked after 2k miles. 4x4 switch failed shortly after. Front end - ball joints, struts, hub bearings - all failed between 38k-50k. Engine started burning oil at 50k. Rear and and transmission failed before 100k. Nothing but problems, and frustration with the piss-poor engineering designed to make you give up. Well, it worked! Nothing on that truck was easy to remove ... except the wheels. They haven't figured out how to screw that up yet. Give 'em time ...   I won't make that mistake again. EVER.   Such fond memories ... https://postimg.cc/K1qf23tS  https://postimg.cc/gallery/X02z64J  https://postimg.cc/gallery/mHSRXZv  https://postimg.cc/gallery/D4mMRfL
    • davester
      OBD not ready?

      By davester · Posted

      Different monitors do their test only under conditions specific to that monitor.  you MIGHT find the drive cycle conditions for the monitor that isn't ready on this site: https://lemon-manuals.la/   If it's not there, then it should be on alldata.com for your truck, but it requires a paid subscription.   And you need to know which specific monitor isn't ready.
    • RW2018GMC
      Me too……..

      By RW2018GMC · Posted

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...