Jump to content

Windshield Washer Odor


Recommended Posts

Posted

Whenever I use the windshield washer feature on my wipers, I can smell a distinct 'washer fluid' odor. Does the washer hose/mechanism pass through the inner cab?

 

P.S. Windows and doors are always closed when I operate the system.

Posted
Whenever I use the windshield washer feature on my wipers, I can smell a distinct 'washer fluid' odor. Does the washer hose/mechanism pass through the inner cab?

 

P.S. Windows and doors are always closed when I operate the system.

Dilute the fluid further with additional water, and the smell should be less noticeable. (I did the same thing to my truck by adding a whole gallon to the reservoir.) :P

Posted

Join the club!

 

I use Canadian Tire Motormaster windshield washer fluid with extra detergents and is rated to -45 C. Whenever I spritz the windshield, I just about puke. Really.

 

:P

 

My 1990 4Runner was like that too, though not quie as bad for some reason.

Posted

I got some washer fluid at walmart many years ago and peeyooo it stunk, so bad I had to get a turkey baster to suck it out ... after that I have always used gm's optikleen

Posted

funny ive never smelt anything, and i noticed somebody say water it down? dont even think about it unless u live in florida or something, its got anti freeze in it if u dulute it it will freeze and not only not work but maybe crack your storage tank and or hoses/pump can u say cha ching???? $$$$

Posted
funny ive never smelt anything, and i noticed somebody say water it down? dont even think about it unless u live in florida or something, its got anti freeze in it if u dulute it it will freeze and not only not work but maybe crack your storage tank and or hoses/pump can u say cha ching???? $$$$

I did suggest watering it down. Living in the south, we don't stop to consider the freezing aspect of the equation down here. Sorry! Guess there should have been a disclaimer on the water it down idea! Thanks for pointing that out. :cheers:

Posted

I've never smelled anything when using the washer fluid in my '01, dosen't matter if I am cruising or sitting still. I wondered why anyone would buy a fragranced washer fluid!

Archived

This topic is now archived and is closed to further replies.

  • Latest Articles

  • Posts

    • $5.19 for regular...
    • My office is slowly filling with Blazer parts. Getting ready to do the big bang of repairs. Intake (second time), water pump, radiator, hoses, and I'm going to re-seal the timing cover where someone went hog wild with silicone. Might as well, because I don't think that's done right.   There's a local tow yard that I didn't realize also has quite the inventory of junk vehicles. This is an old school junkyard. No waivers. Cash only, you were never here if anyone asks. Don't piss off the owner, or you'll end up in the back of one of those cars, headed for the shredder. And if you see something, don't snitch. Cars stacked double high, wasps nests, trip hazards and junk everywhere. I found a few little odds/ends for my Blazer. The $20 I spent was worth the experience alone. But I was never there. What yard?   I officially love/hate this truck. It's so out of my wheelhouse, roughest vehicle I've ever owned. Every. single. repair. -is so hard-fought, everything that can go wrong, goes wrong. Currently in a hate phase, and kind of wish I was closer to sending it down the road with a lucky new owner, to be honest. Preparing for the day when I tear into this thing...lots of pre-funk with Ibuprofen.   Rock Auto sent me a bad reman rear wiper motor. It was a bear to install. The tailgate in these things has about eleventy-billion fastners and pieces and things that need to be uninstalled/moved just to access the shoddy rear wiper motor. The casing on mine was cracked clean through, btw. Nice, GM, nice. SO I got this new motor installed, hit the switch, I see it wig-wag (without the arm installed) and think I'm golden. Reassemble everything. With the wiper arm installed I gave it one final test. Time to clean up and take the other half out to dinner, collect a paycheck, right?   Nope. I hear the plastic worm gear stripping as the arm hung up. Just like my broken motor. Weak/old and shredding itself internally. I can assist the arm and the range of motion is normal, and it parks correctly. It just doesn't have the poop to actually sweep the arm with a blade on it. Oh, hell. Turned the key off and shut the shop door behind me. I get to do that over again, too.
    • A complete delete is the most thorough mechanical solution, but it is also major engine work. On a quiet truck that is still under extended warranty, opening the engine purely as prevention is difficult to justify. A plug-in disabler stops commanded cylinder deactivation, but it does not remove or repair the collapsible lifters, so it should not be treated as failure insurance. I would keep the oil full, document the maintenance, and have any persistent tick, misfire, or loss of power diagnosed promptly. If the engine eventually has to come apart, that is the logical time to compare an OEM-style repair with a complete delete. The right choice depends on the truck’s symptoms, warranty status, expected ownership period, and whether the engine already needs to be opened. We explain that decision in more detail here—full disclosure, this is our own guide: https://www.bluev8.com/blogs/news/do-you-actually-need-an-afm-disabler   One exception: some 2021 L82/L84 trucks have RPO YK9, meaning cylinder deactivation was already disabled in the factory ECM; on those trucks a plug-in disabler is redundant, although the AFM/DFM hardware remains inside the engine.
    • Brought my 2015 Colorado into the dealership to check my touch screen issues, had that ghost touch thing happening. They said I needed a new touch screen and they could either order me one for $500. The lady at the service deck was nice enough to tell me I could order a touch screen online for less, she did stipulate that the touch screen had to be factory OEM, you can't pair an aftermarket screen to my radio seeing it was 2015, it had to be a GM factory OEM only. I found a few on Amazon and Ebay by the numbers on the back of the old screen, DJ080PA-01A GM# 22740886, Some said "OEM" in the description and others just said "Replacement". Would a replacement be the same as a OEM as long as it had the same numbers on the back of the screen? In some of the descriptions they also show different brand names but same numbers, is that an issue?  
    • I have both but typically use the 4 legged walker (wheels on front, ski's on back).   The four wheeler is starting to be used on "longer" outdoor walks.  The 4 legged walker is particularly helpful in practicing good walking posture.  Both of my knees are at different stages of recovery and I'm trying to not develop poor habits.  I can actually manage with a cane but it's very difficult not to favor one leg over the other.  My PT recommends I continue with my 4 legged walker for a while.  Yesterday was four weeks since my last knee replacement and I'm excited about my progress to date.  It has been a hell of a rough journey so far but it is exciting to witness  systematic and continuous improvement.  I went for years watching the decline of my "mobility".  It seems that everyday now I am alerting my wife to something I can do now that I couldn't a day or two ago!  I encourage anyone facing the prospect of knee replacement to share any concerns with others who have had the surgery.  It isn't an instant fix but rather is a considerable amount of short term pain for long term gain.  Recovery time and pain levels vary for individuals post surgery but the end results are typically very positive and I've never encountered anyone regretting having had the surgery. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...