Jump to content

2022 2500HD with a new RSI SmartCap

c0wb0y84

By c0wb0y84
in Modifications & Accessories

 Share

Recommended Posts

c0wb0y84 Enthusiast

c0wb0y84

Posted
Posted (edited)

When I got the truck back in April I had originally planned to go the ARE or Leer route but with a 3+ month wait time, and being in the middle of a cross country move, I had to wait even longer.  After seeing the SmartCap for the first time back in June on a Ranger, I knew that this was the cap I wanted and was able to convince the wife, who wasn't a big fan of the bed cap idea to begin with because she thinks they're just for old men trucks.  Powder coated stainless and the large gull-wing side doors were big attractors to me.  Unfortunately, there is a long back-log on getting these as well.  I placed my order around the 2nd of July and it showed up to my door the 31st of October.  

 

Some assembly is required, but its like playing with a really advanced set of legos.  I've got three kids ages 3-8 so I've had ample opportunity to tune up my lego skills since I had been out of practice for a decade or two, and was able to assemble this in an afternoon and then recruit some neighbors to help lift it on the truck.

 

I wasn't able to find many good pictures of what it looks like on the 2500 prior to purchase so I thought I'd put these up here for anyone else considering one of these.

 

 

IMG_0284.jpg

 

IMG_0282.jpg

IMG_0295.jpg

IMG_0291.jpg

IMG_0290.jpg

Edited by c0wb0y84
  • Like 3
Pryme Senior Enthusiast

Pryme

Posted
Posted
1 hour ago, c0wb0y84 said:

When I got the truck back in April I had originally planned to go the ARE or Leer route but with a 3+ month wait time, and being in the middle of a cross country move, I had to wait even longer.  After seeing the SmartCap for the first time back in June on a Ranger, I knew that this was the cap I wanted and was able to convince the wife, who wasn't a big fan of the bed cap idea to begin with because she thinks they're just for old men trucks.  Powder coated stainless and the large gull-wing side doors were big attractors to me.  Unfortunately, there is a long back-log on getting these as well.  I placed my order around the 2nd of July and it showed up to my door the 31st of October.  

 

Some assembly is required, but its like playing with a really advanced set of legos.  I've got three kids ages 3-8 so I've had ample opportunity to tune up my lego skills since I had been out of practice for a decade or two, and was able to assemble this in an afternoon and then recruit some neighbors to help lift it on the truck.

 

I wasn't able to find many good pictures of what it looks like on the 2500 prior to purchase so I thought I'd put these up here for anyone else considering one of these.

 

 

IMG_0284.jpg

 

IMG_0282.jpg

IMG_0295.jpg

IMG_0291.jpg

IMG_0290.jpg

Looks very nice and well built. What does it do exactly? The website says it’s a five piece cap? I see it’s all stainless which is nice but 4k plus is a lot for a cap so what does it do exactly?

  • Like 1
c0wb0y84 Enthusiast

c0wb0y84

Posted
  • Author
Posted (edited)
2 hours ago, Pryme said:

Looks very nice and well built. What does it do exactly? The website says it’s a five piece cap? I see it’s all stainless which is nice but 4k plus is a lot for a cap so what does it do exactly?

It does pretty much exactly what fiberglass truck caps do but in stainless.  SmartCap is kind of a silly name for it.  It comes in five pieces so it can ship direct to my door for a lot less that trying to get a single piece cap to my door.  Since the closest place that I could get an A.R.E or Leer is two hours away and the base price of the fiberglass caps available to me from them start at $3,000 before adding sliding flip up windows $$, roof rack rails $ and such and then paying for installation $$, the cost difference was negligible and saved me the gas and time for a 4 hour round trip to get it $$$.  

Edited by c0wb0y84
  • Sad 1
Pryme Senior Enthusiast

Pryme

Posted
Posted
10 hours ago, c0wb0y84 said:

It does pretty much exactly what fiberglass truck caps do but in stainless.  SmartCap is kind of a silly name for it.  It comes in five pieces so it can ship direct to my door for a lot less that trying to get a single piece cap to my door.  Since the closest place that I could get an A.R.E or Leer is two hours away and the base price of the fiberglass caps available to me from them start at $3,000 before adding sliding flip up windows $$, roof rack rails $ and such and then paying for installation $$, the cost difference was negligible and saved me the gas and time for a 4 hour round trip to get it $$$.  

Makes sense. Should last forever being stainless. 

sheath Enthusiast

sheath

Posted
Posted

Man, that is a nice cap! I can see why you like it.  It looks really sturdy.  Almost like an enclosed truck rack.  Looks like you can put a pretty substantial rack on top if you want.

This hits a sweet spot for me, as I want a truck to work like a truck, otherwise I'd get an SUV.   Had never heard of this company before your thread.

And for something that requires assembly the shut lines look perfect.  Was that something you had to work at, or does it just go together that well?

 

Very nice! :cheers:

 

c0wb0y84 Enthusiast

c0wb0y84

Posted
  • Author
Posted

Thanks!  The claim is it can hold 700 lbs static and 350 dynamic.  It seems that they were designed with offroad camping in mind for people who like the roof mounted tents and such, based on the pics on the website.  I'm shopping for a wide heavy duty rack for hauling a couple of big canoes up there while camping.  Their rack bars aren't quite wide enough for what I'm looking for and as such whatever I end up with will probably have to be put on just when I need it so that it doesn't interfere with the side doors opening on a day to day basis.  That and I'll need a bar to go over the cab and match the height.  I'm not sure which direction I'll go for that yet.

 

Everything was pretty close tolerances fitting together.  Not too hard to screw up but it did take some effort working the pieces in together.  Their instructions are good so as long as you follow them then it will turn out good.

  • Like 1
  • 2 years later...
c0wb0y84 Enthusiast

c0wb0y84

Posted
  • Author
Posted (edited)

I still really like it and glad I went this route.  I've added some yakima HD bars for hauling canoes and the built in rails are nice for that.  I got the 78" wide bars and they don't interfere with the sides opening up, which was something I was concerned about.  While driving you're not gonna be able to see much out of the side windows so I don't think that would really matter much vs solid but I would still pick with the windows bc even though they're tinted I like being able to look in without having to open the door to see if what I'm looking for is there or not.  There's also some threaded anchor points on the roof inside which I've found pretty handy.  The thing is rock sold!

 

The locks are a bit stiff and can freeze when the temp drops but I usually leave them unlocked so it's not a big deal to me.  The wiring for the CHMSL was kind of a pain bc it had to run all the way back from under the drivers side dash.  RSI also recommends checking the torque on the nuts every so often but I put loctite on during assembly so no problem there for me.

 

I get lots of compliments and questions about it for sure.

IMG_2228.jpeg

Edited by c0wb0y84
  • 2 weeks later...
  • 1 year later...
cseaman Enthusiast

cseaman

Posted
Posted
On 1/24/2025 at 11:07 AM, c0wb0y84 said:

I still really like it and glad I went this route.  I've added some yakima HD bars for hauling canoes and the built in rails are nice for that.  I got the 78" wide bars and they don't interfere with the sides opening up, which was something I was concerned about.  

 

 

Thanks for the follow-up posts. I'm about to buy a second hand Smart Cap and have 78" Yakima HD bars in the garage. Did you need to buy anything besides the bars to mount them to the cap?

Tyler Gibbs Enthusiast

Tyler Gibbs

Posted
Posted
On 1/24/2025 at 1:07 PM, c0wb0y84 said:

I still really like it and glad I went this route.  I've added some yakima HD bars for hauling canoes and the built in rails are nice for that.  I got the 78" wide bars and they don't interfere with the sides opening up, which was something I was concerned about.  While driving you're not gonna be able to see much out of the side windows so I don't think that would really matter much vs solid but I would still pick with the windows bc even though they're tinted I like being able to look in without having to open the door to see if what I'm looking for is there or not.  There's also some threaded anchor points on the roof inside which I've found pretty handy.  The thing is rock sold!

 

The locks are a bit stiff and can freeze when the temp drops but I usually leave them unlocked so it's not a big deal to me.  The wiring for the CHMSL was kind of a pain bc it had to run all the way back from under the drivers side dash.  RSI also recommends checking the torque on the nuts every so often but I put loctite on during assembly so no problem there for me.

 

I get lots of compliments and questions about it for sure.

IMG_2228.jpeg

Is it an optical illusion in the pic or is the truck really squatting that much horribly?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • Atlas
      Wow I'm in a pickle. (Broke down truck) and a story.

      By Atlas · Posted

      So, do I go elbow-deep on this thing or list it for sale and play dumb? Seems to "runs good."   I'm about $1200 away from having: -a rebuilt injector ($300) -a new cat ($250) -a new cat back exhaust (OE style) ($300) -a new AC compressor ($200) -AC refrigerant charge ($150)   In theory, this should rectify the obvious detracting issues from its value and operability. Cold AC with a non-squeaking AC pulley both sounds and feels good. An exhaust that isn't cut/hacked in 17 different places and doesn't vibrate on a crossmember would make it sound and feel less janky. A working cat would help the stink, and will save the earth, but *if and only if* the fuel system is working properly, which would also address the intermittent "rich" CEL.   Heard a good one... CEL for "Rich condition" means you haven't spent enough money on the truck lately, and it's letting you know.   Rebuilding the injector would seem to be the most important part. Replacing the cat would be secondary. I don't think mine is plugged or overly restricted, but it might be a little restricted? I have no good way to tell other than seat of the pants feel. I hate the smell.   The current theory is I have a rich idle problem: A bad fuel pressure regulator, or a leaking injector(s) being the highest probabilities. I already replaced the FPR but that doesn't mean its replacement isn't also bad. It was a new part from Dorman, but the packaging looked like it had been sitting on a shelf for 20 years.   This is the (single) upstream O2 sensor shown at idle. I'm getting a lot of "rich" it seems. Sometimes it stays high like that and doesn't drop down. That makes me think it's processing injector leaks or a partially stuck open injector.     Other times it looks like this. Nice oscillations between rich and lean, which is what I think it should be. Under load and at speed, the oscillations are nice and tight and uniform looking, high and low.     Fuel trims suggest the PCM is compensating pretty hard at idle to pull fuel out. But it's not enough to trip a CEL. Something about slowing to a stop: brake vaccum booster, EGR, or the EVAP purge is delayed, or there's pooled fuel in the intake again that's draining into a cylinder is enough to set the CEL. Of course, in two days of driving, it hasn't set. I was hoping to actually look at the freeze-frame data when it sets. IAT is high because it's idling on an 83 degree day here.  
    • Another JR
      Gasser Subforum Has Been Quiet - - So, Regenerative Braking and Using L10

      By Another JR · Posted

      Have considered installing a DC to DC charger in your camper to replace your isolator?  
    • newdude
      Gas fill door

      By newdude · Posted

      Common failure.  You need to replace the fuel door housing.   The painted cover transfers over to the new housing.  To remove the old one there is 4 spots where you poke the plastic to release it.  
    • newdude
      Gasser Subforum Has Been Quiet - - So, Regenerative Braking and Using L10

      By newdude · Posted

      No such thing as regenerative braking on a pure ICE vehicle.     Regenerative braking is the re-capture of energy from electric motors and stores it in the battery pack.  So hybrids, PHEV and EVs have regenerative braking.     What you are seeing is the charging system changing modes is all.  Its likely entering charge mode for some sort of reason is all.  All of the charging modes will be listed below.   As for L10 vs D.  L10 turns off automatic grade braking.  L10 puts you in control of grade downshifts where in D it will automatically do it based on brake pedal position and other factors.  Otherwise L10 and D drive exactly the same aside from that one aspect.    Battery Sulfation Mode The BCM will enter this mode when the interpreted Generator output voltage is less than 13.2 V for 45 minutes. When this condition exists the BCM will enter Charge Mode for 2–3 minutes. The BCM will then determine which mode to enter depending on voltage requirements.   Charge Mode The BCM will enter Charge Mode when ever one of the following conditions are met:   Windshield wipers are ON for more than 3 s. Climate Control Voltage Boost Mode Request is true, as sensed by the HVAC control module via serial data. High speed cooling fan, rear defogger, and HVAC high speed blower operation can cause the BCM to enter the Charge Mode. The estimated battery temperature is less than 0°C (32°F). Battery State of Charge is less than 80%. Vehicle speed is greater than 145 km/h (90 mph) A current sensor malfunction exists. System voltage is determined to be below 12.56 V When any one of these conditions is met, the system will set targeted generator output voltage to a charging voltage between 13.9–15.5 V, depending on the battery state of charge and estimated battery temperature.   Fuel Economy Mode The BCM will enter Fuel Economy Mode when the estimated battery temperature is at least 0°C (32°F) but less than or equal to 80°C (176°F), the calculated battery current is less than 15 A and greater than −8 A, and the battery state-of-charge is greater than or equal to 80%. Its targeted generator output voltage is the open circuit voltage of the battery and can be between 12.5–13.1 V. When fuel economy mode is active, the generator is not charging, only maintaining open circuit battery voltage. The BCM will exit this mode and enter Charge Mode when any of the conditions described above are present.   Headlamp Mode The BCM will enter Headlamp Mode when ever the head lamps are ON (high or low beams). Voltage will be regulated between 13.9–14.5 V.   Start Up Mode When the engine is started the BCM sets a targeted generator output voltage of 14.5 V for 30 s.   Tow/Haul Mode (if applicable) Pressing the Tow/Haul Mode button located on the center stack, the vehicle system voltage is raised and the remote (non-vehicle) battery will be charged. Having the headlamps on will raise the system voltage and if the Tow/Haul button is applied it will not serve any purpose. The voltage is regulated between 13.9-14.5 V.      
    • jaszr2
      Active Grille Delete

      By jaszr2 · Posted

      Hello from Australia Just sharing that there is now a way to delete the active shutters entirely with just a plug in module. Opens up tons of room to light bars etc.

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...