Jump to content

Recommended Posts

Posted

I think the first thing you will notice is the motor will be quieter, that's been my experience with Amsoil.

  • Like 1
Posted (edited)

..............................

Edited by elcamino
Posted (edited)
3 hours ago, diyer2 said:

I think the first thing you will notice is the motor will be quieter, that's been my experience with Amsoil.

 

That's with every oil change and any oil. I always hear a nice difference after the initial start with an oil change. I would hope one would notice a quieter sounding engine, my wife does...

 

And this thread couldn't have been posted in the other Amsoil 0w20 oil thread you started with just an update; it needs its own thread? 

 

 

Tyler

Edited by Amcguy1970
Posted
1 hour ago, Diamond817 said:

Just curious, what engine do you have that requires 0w-20? I have a 21' 5.3l and it calls for 5w-20.

 

 

Your truck takes 0w20, not 5w20.  All the Gen V V8 truck engines from 2014-current use 0w20.

Posted (edited)

No 2021 uses 5W-20..

 

Edited by elcamino
Posted

6.2L  0w20  im sure 5w20 is ok even 5w30 is ok to run, only reason gm go thin is toga better MPG,  corvette 6.2 take 0w40 , my ram ask for 5w20 and I run 0w40 in it and that hemi love that oil.

Posted

I haven't used Amsoil or changed my oil myself in at least 15yrs, but back then Amsoil synthetic was a 25,000 mile oil. Now I see they have a couple different levels of each grade but I dont' see any mileage claims for any of them. Even Mobile 1 is making mileage claims on their oils. So, how many miles is Amsoil good for nowadays?

Posted
9 minutes ago, Diamond817 said:

I haven't used Amsoil or changed my oil myself in at least 15yrs, but back then Amsoil synthetic was a 25,000 mile oil. Now I see they have a couple different levels of each grade but I dont' see any mileage claims for any of them. Even Mobile 1 is making mileage claims on their oils. So, how many miles is Amsoil good for nowadays?

signature is good for 25k, I would never go that far with any oil.

Posted
26 minutes ago, Big_Kahuna said:

signature is good for 25k, I would never go that far with any oil.

Ok, I just looked again. I see:

 

Signature = 25,000mls (this is what I used to use)

XL = 12,000mls

OE = I guess whatever your manual calls for?

 

 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.4k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,782
    Total Members
    8,960
    Most Online
    ShowMeShooter1332
    Newest Member
    ShowMeShooter1332
    Joined
  • Who's Online   3 Members, 0 Anonymous, 5,823 Guests (See full list)

  • Latest Articles

  • Posts

    • I was around and remember that era very well, so I'm calling b/s on that statement. If they were that bad no police department or taxi company would've bought a single one ... but they were used in both services (and fire) for DECADES. They were bulletproof and proven. Even the early 21st century ones weren't too bad! The early models were legendary.   Mine is proof, but people like atlas are blinded by agenda and refuse to believe facts right before their very eyes.   Even decades after they were built, a new generation started driving them, posting all their builds and shenanigans on Grandmarq.net and Crownvic.net. The failures would show up then, since they all were deep past 100k-150k miles by that point, and younger drivers tend to be a little aggressive, especially with vehicles than can lay a one-tire fire for as long as you hold your foot in it. They've more than proven themselves over the decades.   The only thing that'll really take them out is road salt. The bodies and sheet metal were garbage. A victim of the cheapout FoMoCo and GM have been partaking in before then, and since.   Today it's the stuff that counts - the undercarriage that rots away first!     
    • Let me know how your vehicles do in 10 years. You don't know ******, kid. 😂    There's a reason that Panther platform was used as police, fire, and taxi service for DECADES ... long before you were born, apparently.
    • If your connector also has a big lever to get the connector on and off, you don't want to force the lever either way, as it becomes a bigger problem if you bust the lever or the mechanism it works.
    • It's just useful to disconnect the battery to prevent odd shorting out when unplugging/plugging stuff together.  I also  touch the two cable ends together (after disonnecting) to drain the small amount of stored battery energy in various modules.   I believe the main system where you need to be more concerned with, so you need to do the above and then wait some time, iss when you are working on the air bag system, to prevent inadvertent firing of the air bags.   The in-cab switches are just that, plain switches, it's generally not a problem to swap them in/out.  For my '12, I'll get an error message on the dash if I power up the truck w them unplugged, but that's it (power up= turn the ignition on).   The ITBC located above the spare tire is a computer that manages the trailer brake system.  That is probably more important to have the battery disconnected.  It does have to be programmed to the truck, either before or after it's installed, for it to work.  For my '12, I had a very hard time reinstalling the main connector to it (IDK if yours is the same or not), it turned out the silicon seal was jamming up, preventing it from going on all the way.  I finally got it fully installed by lubing the seal with a bit of dielectric grease, then it slid on and latched in place easily.
    • JR ! I just got the truck back from the Dealership today . The technician did a cold remote start on the truck this morning and it made the noise . It was determined that it was a starter issue and replaced it under warranty . Of course   it did not make the sound after a new starter was put in because the truck was not cold . We will we see what happens tomorrow morning when I start the truck cold  . Keep tuned !   Oh I found a video on YouTube of a cold start and it did the same thing your truck and mine do , I will see if I can find it and post it up
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...