Jump to content

Anyone using ACDelco additives to avoid DFM issues?

Jimbeau
 Share

Recommended Posts

Jimbeau Enthusiast

Jimbeau

Posted
Posted

I have a 2023 Sierra 4x4 with the 5.3 DFM engine. Purchased new 13 months ago. 

After voicing my DFM concerns to my trusted independent mechanic he made a few suggestions: 
-Always run Top Tier fuel. I’m using Costco gas.

-Frequent oil changes. I’m only at 3,000 miles but the truck is a year old now. Guessing it’s about time for my first oil change… 
-Use ACDelco 10-3012 fuel treatment every 5,000 miles. 
He’s equally adamant about all 3 suggestions. 
 

Has anyone been using this 10-3012 fuel treatment in the new 5.3 engines? If so I’d appreciate feedback. 
 

Thanks. 
 

Bikerjon Enthusiast

Bikerjon

Posted
Posted
1 hour ago, Jimbeau said:

I have a 2023 Sierra 4x4 with the 5.3 DFM engine. Purchased new 13 months ago. 

After voicing my DFM concerns to my trusted independent mechanic he made a few suggestions: 
-Always run Top Tier fuel. I’m using Costco gas.

-Frequent oil changes. I’m only at 3,000 miles but the truck is a year old now. Guessing it’s about time for my first oil change… 
-Use ACDelco 10-3012 fuel treatment every 5,000 miles. 
He’s equally adamant about all 3 suggestions. 
 

Has anyone been using this 10-3012 fuel treatment in the new 5.3 engines? If so I’d appreciate feedback. 
 

Thanks. 
 

No I don't use the fuel additive. I do change oil between 2500 and 3000 miles. Oil is cheap insurance. Top Tier fuel is good but I just use 87 octane pump gas. I really wanted a 6.2 but they require premium fuel. My Trail Boss is almost identical mechanically to your Sierra 5.3 DFM, 10 speed trans, 4X4 of course and purchased new 13 months ago. That's how I run mine.

  • 3 weeks later...
repairman54 Enthusiast

repairman54

Posted
Posted

3k miles in a year, change it at least yearly. In fact a lot of the GM oil life monitors will go to zero life after a year. 

Only fuel additive I use is one with PEA in it to keep injectors clean. 

Real life story, my DIL '16 3.6 Equinox had erratic engine stuttering at highway speeds, nothing around town. About 110k miles on it. I told her to run 2 tanks of gas with Gumout all in one in it and the stuttering went away. No CEL or codes either. I've got her on the every oil change to toss a bottle in now. Who knows what brands of regular she is running in it. 

I only use fuel additives with PEA in my fleet, not sure if the GM one has it. Techron is good and the Gumout all in one is readily available and it does say PEA on the label. 

newdude Senior Enthusiast

newdude

Posted
Posted (edited)

Fuel treatments wouldn't have an affect on AFM/DFM that I can think of whatsoever.

 

Its the maintenance which is key.  A good oil and changed frequently.  Mind you, I only put about 50k on each of the two 5.3s I owned, but my 2012 I would change every 3000mi, no AFM lifters failed, and my 2019 LD (the old body like a 2018), same thing, changed every 3000mi, still ran 0w20 even and never had a lifter failure or camshaft failure.  

 

There could be arguments made on that change interval, sure.  The big thing I come back to is relying on the oil life monitor but using the bare minimum of oils on that.  You can see the internals of some of these engines and you can tell its from pushing the oils too far on drain (OLM to 0%) and using the bulk dealer oils (AC Delco Dexos 5w30 or 0w20).  

Edited by newdude
  • Like 1
customboss Senior Enthusiast

customboss

Posted
Posted
3 minutes ago, newdude said:

Fuel treatments wouldn't have an affect on AFM/DFM that I can think of whatsoever.

 

Its the maintenance which is key.  A good oil and changed frequently.  Mind you, I only put about 50k on each of the two 5.3s I owned, but my 2012 I would change every 3000mi, no AFM lifters failed, and my 2019 LD (the old body like a 2018), same thing, changed every 3000mi, still ran 0w20 even and never had a lifter failure or camshaft failure.  

 

There could be arguments made on that change interval, sure.  The big thing I come back to is relying on the oil life monitor but using the bare minimum of oils on that.  You can see the internals of some of these engines and you can tell its from pushing the oils too far on drain (OLM to 0%) and using the bulk dealer oils (AC Delco Dexos 5w30 or 0w20).  

I know this sounds odd but if the tune and fuel delivery is sub optimum fuel’s dilution will

make deposits on AFM components over time making a sticky translucent deposit that’s varnish or shellac like that IS impacted by polymeric fuel additives after they are EGR’d especially. 

  • Thanks 1
Jimbeau Enthusiast

Jimbeau

Posted
  • Author
Posted

Thanks for sharing your info. I recently noticed the Owner’s Manual recommends using only Top Tier fuels, which I always comply with. It also says that if not used Top Tier fuels a GM fuel additive should be used at certain intervals. Hmm…Seems to reason. 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Forum Statistics

    250.6k
    Total Topics
    2.7m
    Total Posts

  • Member Statistics

    342,993
    Total Members
    8,960
    Most Online
    President Roberto
    Newest Member
    President Roberto
    Joined

  • Who's Online   1 Member, 0 Anonymous, 252 Guests (See full list)

  • Latest Articles

  • Posts

    • bwiese
      upgrading speakers on 2026 std cab WT...

      By bwiese · Posted

      I don't wanna do major surgery/upgrades, behind-the-dash work, add amps, change radio etc. on my '26 std cab WT. On the WT, it has the base 7" IOR infotainment setup, and only two speakers (doors). Since I listen to classical, looked around for speakers that do well and dug thru reviews. Two-way speakers were found to be better than 3-way. So I've ordered a pair of  Infinity Reference REF-9632IX 2 way speakers.  [These may  or may not have been discontinued / succeeded by the 3-way ...9633 ones.]    These speakers are lauded for 3 ohm and 94db sensitivity spec so they'll work well for ordinary base car radios without amps and offer better performance (quality,  strength) than  default base paper-cone speakers. They'll be installed in a few days and I'll let y'all know what I think. Bill W San Jose      
    • RyanbabZ71
      RyanbabZ71's 2019 High Country

      By RyanbabZ71 · Posted

      Thanks!   Changed out the rear shocks today to Bilstein 5100s.  So far feel much better. The stock Rancho were wore out.  Lots of heavy hauling (2 moves, home renovations, etc).  Next up is new BFG tires Monday.  Cant wait the current tires have little to no wet traction and are super loud (hum)    
    • Snowcamo
      No high speed fans...

      By Snowcamo · Posted

      Ok, I got the all the codes. What do you all think would be a place to start?
    • Chuck FB
      Correct way to service 2024 l8t allison trans?

      By Chuck FB · Posted

      How about I just point to the factory pans stand pipe little drain plug and claim its a pan with a real drain plug !. I just couldn't swallow the fact that a Dorman pan which at this point is probably the only pan out there that fits the gas version truck cost that much up here in Canada so I decided initially anyway to skip it and see what I thought of pulling the pan method and down the road if I felt inclined enough then I would either install a drain plug kit in the factory pan if there is enough room for it, or have a bung welded onto it, or put an aftermarket pan on. The thing is if the pan is not pulled then the magnets in the pan can't be inspected and cleaned or if wanting to change out the filter. However of course it certainly would make the job easier to be able to drop the oil first before having to handle the pan if dropping the pan that go around was the goal.    I knew a guy locally that was doing custom field spraying years ago with a pickup pulling a ground driven sprayer, I believe it was a GM pickup with an automatic trans. He had a drain plug in his pan and would drop the oil out of it once a week and top it back up through the dipstick tube to keep refreshing a portion of the oil often and that made the transmission last far longer than had he done nothing. Soft fields pulling 500 gallons of water at the start of each mixed up sprayer tank batch and in low range sucking along. I imagine he got some tips from other custom sprayer outfits doing the same thing at the time and learning from their blown up tranny mistakes. Transmissions then had no lock up converter so would cook the crap out of the fluid slipping that much and it would not have been synthetic fluid either. 
    • KARNUT
      Gas Prices

      By KARNUT · Posted

      3.39 Kroger’s in Montgomery Texas. 

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...