Jump to content

Recommended Posts

Posted

Just purchased a brand new Chevy 2500 Gasser. Has about 300 miles on it. Has a strong sulfur smell when driving with the windows down. Especially when accelerating quickly. No smell at idle or with the windows rolled up. No smell around exhaust pipe. Battery doesn't smell. No check engine light. Any ideas?

Posted

You sure it's not that normal "new engine" smell? New vehicles have a weird smell when oils/coatings on the engine burn off. It usually goes away after a month or so.

Posted (edited)

Most likely its from the catalytic converters breaking in.  Also, if you had any undercoating done that may bake off a bit as well.  

Edited by newdude
Posted

i had a weid smell tonight on way home from picking up my truck.....bought several before but this is first one I smelled something....IDK about rotten egg but a rotten something.......went away after awhile

  • 2 weeks later...
Posted

I only had the New Truck for about 100 miles. It's been at the dealership for service for a couple weeks now. Truck still smells like sulfur but they are denying the issue. General Motors advised me to take the truck to a different dealer for service.

Posted

I'm not sure of the composition of todays catalytic converters but in the old days the rotten egg smell was an inidcation it/they are failing/clogging up.

  • 4 weeks later...
Posted (edited)

My truck had that problem a month ago, around 10k miles on a 2024. It went away. I have no idea why this problem came about, but it only lasted for a tank of diesel (really a tank and a half) so  maybe it was bad fuel? Not sure!? I've driven 2k miles and many tanks since (big road trip with trailer) and had zero issues since. EDIT: I just re-read that you had a gasser...maybe it is a CAT issue then, hopefully it will be a transient issue like mine was. 

Edited by davidm767
Posted

I wonder if it's the fuel? W/ my 2017 I'd notice sometimes that the exhaust smell was off.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Latest Articles

  • Posts

    • That should answer the maximum depth difference between the stock and the PPE so its not hugely lower. As to the PML pan, they don't make any claims that it fits the L8T with the same transmission and in fact leave their information confusing, however on the surface it says "for Duramax" and so its hard to say. I know a while back and not sure which brand it was that specifically stated that the extra capacity pan that particular company made did NOT fit the gas version. 
    • There are several versions of the 5100's. Some for stock height, some for leveled, some for lifted.    Side note. I finally had a chance to tow with my 30' gooseneck with about 10,000 lbs of material on it this past week. Hands down the 5100's made the trailer towing much more stable and comfortable. I even had 10 cmu blocks in the bed. What a difference over the stock shocks. 
    • According to PML, the stock pan is 4.3" deep - (PML info): Dimensions: at deepest area, PML pan is 7 inches, stock pan is 4.3 inches    PPE is 5.4" so roughly 1.1" deeper than stock
    • I had not realized that PPE has come out with a version of a cast aluminum oil pan specific to being able to fit onto the 10L1000 with the L8T engine sometime this spring. I was doubting that anyone would come out with something beyond what Dorman had in more of a direct factory pan swap. I see from one comment that is on the PPE site that they found the pan to be tighter to install then the factory unit and having to flex the exhaust down to fit it. I didn't lookup any specs if they have any as per how much lower it hangs but as it holds more oil and has fins outside the pan it would no doubt hang a certain amount lower.    I looked back at the site and they do have some depth measurements to get a rough comparison to the factory pan total height or hang down if you will at the front and rear of the pan so that will give a good idea how much further down this pan would end up being for ground clearance issues.    2024-2026 GM 6.6L Gas 10L1000 Heavy-Duty Cast Transmission Pan – Pacific Performance Engineering    
    • I'm in constant amazement over the number of people that do oil maintenance by how they feel, what they were told, what materials cost, what brand A claims vs brand B.     Come to think of it, this behavior isn't exclusive to oil. 🤔 They drive this way too. 😬   There is a 20 plus page thread on BITOG on Mobil 1 Advanced Clean vs Valvoline Restore and Protect it would be amusing if it were not so........humanly pitiful.   Last Sunday we were are sitting at services and listening to a speaker talk about Jesus parable of the wide and narrow gates and he said something that hadn't dawned on me but totally fit the way people in general are about just about everything. He said there are so few people on the narrow path leading to a good reward not because the the narrow gate was hidden or hard to find but because the wide gate leading to a bad end it so darn easy and uncomplicated to follow!!!             
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...