Seat Upgrade . Will LTZ Seats Fit Sierra?

[NorthernX31]

I have a 2020 1500 SLE and have a chance to buy leather seats from a 2021 LTZ 1500.Will they bolt up? I'm hoping that this will be a bolt in.  What about wiring? The seats are in another town so I have to buy just seeing the pictures.

[JimCost2014]

Will they bolt up?

 

Yes.

[JimCost2014]

What about wiring? 

 

If your truck has the wiring looms for power, heat, cooling, and so on, yes, if not, no. You will just have leather power seats that do not move or adjust.

[NorthernX31]

10 hours ago, JimCost2014 said:

What about wiring? 

 

If your truck has the wiring looms for power, heat, cooling, and so on, yes, if not, no. You will just have leather power seats that do not move or adjust.

Thanks for this. I was concerned that there might have been a difference in floor shape or bracketry preventing a direct swap. My truck does have powered drivers seat and both front seats are heated,so I'm hoping that wiring will connect. As for the cooling and the power on the passenger side,I'm going to have to dig deeper. Do you know of anyone who has done this swap successfully?

[Brad Styan]

I went from manual to power. you can tell if your passenger seat has power by comparing it to the photo below. The harness DR sells a harness to power the passengers seat if yours is not powered . 2019 - 2022 Silverado/Sierra: Manual to Power (Passenger) Seat Retrofit Harness - Harness Dr. - DIY Done Right If your truck came with  heat/vent seats you the heat/vent will work on your new seats. If you only had heat that is all you will have working on your new seats. Heat /vent is controlled by the BCM and it has to be programed to add the vent function . To my knowledge  no one can or will do that for you 

 

 

[NorthernX31]

10 hours ago, Brad Styan said:

I went from manual to power. you can tell if your passenger seat has power by comparing it to the photo below. The harness DR sells a harness to power the passengers seat if yours is not powered . 2019 - 2022 Silverado/Sierra: Manual to Power (Passenger) Seat Retrofit Harness - Harness Dr. - DIY Done Right If your truck came with  heat/vent seats you the heat/vent will work on your new seats. If you only had heat that is all you will have working on your new seats. Heat /vent is controlled by the BCM and it has to be programed to add the vent function . To my knowledge  no one can or will do that for you 

 

 

Thanks for the detailed response that is what I was looking for.