Jump to content

What is going to happen if engines keep consuming oil?

Interleukin6
 Share

Recommended Posts

Interleukin6 Enthusiast

Interleukin6

Posted
Posted (edited)

I have a 2022 LTD LT 2.7T. It seems that these engines are well known to consume oil. I am adding 0.25 qt every 1000 miles. Otherwise, the truck has been good (currently at 58k miles). Also read other engines are also consuming oil too. What is going to happen in the future if engines keep eating up oil like this? Am I going to face major repairs requiring $xxxx to fix when more than 100k miles something? I think there is nothing I can do about this. I just change oil every 3500-4000 miles.

Edited by Interleukin6
redwngr Senior Enthusiast

redwngr

Posted
Posted

Be sure you are checking if cold, before first start of the day to get the most accurate level reading.

 

 

If it is going down at that rate you'll probably add a quart every 4000 miles and be none the worse for it. 

Used to be a quart in 4000 miles meant a quart between between oil changes and life was good.  

(Maybe you'd prefer to add 1/2 quart every 2000 miles)

 

 

Some engines that 'don't use any'  - it's because they aren't run long enough to get the condensation out and it is accumulating. 

Or they are collecting a little fuel in the oil.

Or the mystery coolant loss is ending up in the oil.

 

newdude Senior Enthusiast

newdude

Posted
Posted

Well within the limits per GM, that's for sure.  1 quart in 2000mi is the consumption limit.  You are 1/2 quart in 2000mi.  

 

Being its a 2.7, look for leaks first.  Oil pan, oil cooler, turbo lines.

 

I don't consume but I leak (oil cooler).  1/2 a quart in 3000mi is my leak rate.  

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • Tyler Gibbs
      Travel Trailer 2024 2500 HD 6.6 Gas Engine ?

      By Tyler Gibbs · Posted

      The curb weight on a 1 ton crew cab long bed is around 7k lbs.  Now, I don't know where you went to school but 9k is not more than 2x 7k lbs. More than 2x 7k lbs would be 14k+.   With that said, obviously yes you're going to feel a 9k lb trailer when slowing down.  I already said, when accelerating.  When changing lanes?  No.  But if you look at the context of what was quoted, the original person said, "after a mile or two..." which means that would be after the accelerating portion and you're driving a generally steady pace.  Please do learn to read and comprehend.
    • sFrank
      2026 Silverado Range AFM DFM ECU loaction

      By sFrank · Posted

      So I purchased the Range unit for my 2026 and I am seeing different locations suggested for the ECM . Can anyone confirm wither under hood, left side or right side or behind the wheelwell?
    • No F-bdy Bs
      Dave's Auto (custom engine builder) tear down of L8T

      By No F-bdy Bs · Posted

      Like I've said before. Di and Carbon buildup is not that big of a concern. Engine had minimal buildup, and that engine was obviously not super well maintained. Do regular oil changes, and you're gtg as long as the rest of the truck lasts. Also, the High Pressure FP that people ****** about, but can't tell you why.  Now, I wish they'd trash the variable oil pump. No real world issues with them, but I'll gladly eat whatever miniscule MPG it's saving me in favor of more oil at all RPMs.    Curious to see his assessment of the 7.3 compared to the 6.6. I expect he'll praise the port inj, but from a structural standpoint, the 6.6 is as robust as any engine out there.    Not to take away from the 7.3. I feel it's equally as good as the 6.6.     As to heat on the rear cyls, I'd have to see numerous examples before I'd say it's an issue. Especially not knowing the history of that engine. For all is known, they could have blown a rad hose, and ran it hot, and the 2 rear cyls may be the first to get hot in a low coolant situation, but not be an issue aside from that. 
    • Donstar
      Navigating senior years.

      By Donstar · Posted

      "Life is getting back to normal."    I'm driving again and all new joints are operating as expected for this stage of recovery.   My most recent joint replacement still requires a lot of attention but experience has taught me that time will quiet the remaining pain.  I joked with my surgeon that another joint replacement would take my mind off my most recent surgery and he responded by saying the next will be a hip!  There are no plans for another surgery but, unlike me, I don't think he was joking!  I certainly wouldn't refuse further replacement  if required but hope to spend time out of the "post-op"  period.  I can't stress enough that if you have been recommended for total hip, knee or shoulder replacement that you welcome the offer.  Post-op "recovery" may sound daunting and painful, however, this is far better than the insidious erosion of mobility you are currently experiencing.  Imagine what it would feel like to wake up most mornings feeling better and more mobile than you did the previous day!  Prior to my first surgery in June 2025, even getting out of bed was becoming a formidable task.  Since the day after my first surgery, I get out of bed everyday easily and unassisted.  Making the switch to feeling a little better each day rather than a little worse, is hugely motivating!
    • Coastie05
      ‘25 Silverado purchase- back to dealership for bumper/radio issue

      By Coastie05 · Posted

      Hope it all works out for you. 

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...