Jump to content

2018 GMC DMax to 2025 Custom Gas

Icutmetl
 Share

Recommended Posts

Icutmetl Enthusiast

Icutmetl

Posted
Posted (edited)

Traded in my 2018 2500HD All-Terrain HD SLT diesel with 176k on a 2025 2500HD Custom gas with 1 mile. I bought the GMC new and it was good to me for the most part but I did have a few issues with it over the years and although I took very good care of it and it still looked awesome with no rust, it was starting to develop some quirks and I ultimately made the call to replace it vs. flying closer and closer to the sun. My wife cried because she really loved our GMC and I was a little upset to my stomach too (giving up memories and cost of replacement), but it was time.
 

I chose gas over diesel this time mainly because of initial cost (purchased off grid camp on 10ac last year and that eats into our finances), I really don’t NEED the diesel, and although I may miss the grunt, I’m not sure the juice will be worth the squeeze for how I’m using it most of the time. 
 

I landed on the Custom package because of overall value. I really liked my SLT All-Terrain’s interior and features but again, it really came down to cost and being honest with myself about needs vs. wants. I liked the leather and buckets/console but never used the heated seats & wheel and forgot I had a sunroof most days. I feel we got an average deal (not great, but reasonable), and the transaction at our dealer was easy which counts for something with me. 

 

I considered a half ton this time but by the time I optioned a 1/2t truck for real work, I kept ending up at around the same price for an equal trim package…and a truck that lacks capability vs an HD. I’m really only towing snowmobile trailers a few times per year, but in gnarly conditions and getting pushed around by wind on snow packed roads in a lighter truck is no fun. I’ll also have my bed full (like Beverly Hillbilly full) driving 8hrs+ to our cabin and refuse to do that with the rear end sagging. So those things and also being able to tow a heavier piece of rental equipment every now and then kept me in an HD. 
 

My first impressions of the 6.6 gas engine during my test drive and on the way home from our dealership is that it’ll be better for my day to day use than the Duramax was for how I drive. It’s much more responsive and doesn’t feel heavy or sluggish. I don’t expect any disappointment until I really pour the beef to it with a load…which isn’t that often in reality. I get a vehicle allowance thru work and they pay for my fuel & basic maintenance, so while I don’t take that for granted or abuse it, the fuel mileage disparity is less of an issue. 

IMG_7744.jpeg

Edited by Icutmetl
  • Like 3
CRApex Enthusiast

CRApex

Posted
Posted

Nice looking truck!  Sounds like you made a good decision, that 6.6 gas will handle anything you throw at it.

  • Like 1
BuckWallace Enthusiast

BuckWallace

Posted
Posted

Very nice, congrats! I think you made the right choice going gas. Unless you're towing heavy often, it really doesn't make sense to go diesel (unless money is no object). I've been very happy with my gasser over the last 18 months—enjoy!

  • Like 1
NaturallyAspirated Enthusiast

NaturallyAspirated

Posted
Posted

Beautiful truck. Wife wishes I got that color instead of mine. 
 

I switched from a diesel 3/4 Ram. You’ll love the gasser. No more def is a big deal. And it’s probably much more reliable. Love my truck as much as when I first bought it. 
 

My L8T is at 57k mi and has never run smoother. And it pulls so much stronger than previous model yr gassers. The Custom is really a dressed up work truck. Not like the 1/2 ton truck-cars. Rides a little more rough but it’s smooth when loaded up. I personally like the ride and the wife finds it barely acceptable, which is better than the Ford and good enough for me.
 

Someone else one this site was wondering about using a 2500 as a daily driver and I think this truck is great all around, even for that! …as long as long as you ain’t in the city…

 

HD trucks are just so practical and this one should turn out to be very reliable.

 

 

  • Like 1
Icutmetl Enthusiast

Icutmetl

Posted
  • Author
Posted
7 hours ago, Dunn said:

Yeah she looks really bummed, lol

Haha…my wife had a really hard time getting rid of our last truck because of all the memories attached to it and got pretty emotional a couple of times. It was my daily driver for the last 3-1/2 years, too. I Fluid-Filmed it 1-2x per year and was pretty ****** about keeping up to date on cleaning & maintenance. She’s really liking our new truck so far, though and do am I. I’m looking more and more forward to “making it mine.”

IMG_7729.jpeg

buelldude Enthusiast

buelldude

Posted
Posted

I have to ask, I think I may do the same, diesel to gas that is. How do you like it for towing, power wise and fuel use? We pulled the camper around more in the past, this year we only used it 3 times. 

   So here is my big issue with it, towing specs. It almost cuts the numbers in half for towing???? I have a gooseneck that is a bit on the heavy side but still falls into the specs of like trucks. I can't find any gas trucks with the pin weight over 2600. Can anyone post a pic of your door jam sticker????

bruceb58 Enthusiast

bruceb58

Posted
Posted (edited)
21 hours ago, buelldude said:

I have to ask, I think I may do the same, diesel to gas that is. How do you like it for towing, power wise and fuel use? We pulled the camper around more in the past, this year we only used it 3 times. 

   So here is my big issue with it, towing specs. It almost cuts the numbers in half for towing???? I have a gooseneck that is a bit on the heavy side but still falls into the specs of like trucks. I can't find any gas trucks with the pin weight over 2600. Can anyone post a pic of your door jam sticker????

You typically get larger payload numbers with gas. My 2024 GMC Denali 3/4T has 3346# of payload.

 

My max gooseneck tongue weight is 2760#

IMG_1604.JPG

Edited by bruceb58
Icutmetl Enthusiast

Icutmetl

Posted
  • Author
Posted
6 hours ago, bruceb58 said:

You typically get larger payload numbers with gas. My 2024 GMC Denali 3/4T has 3346# of payload

IMG_1604.JPG

Mine is similar…3,4XXlbs of payload. You’ve got to go 3500 to get that extra leaf for max payload in an SRA.

 

i have not towed with it yet…just got it the day after Christmas. For my needs, I think it will suit me fine…but I have realistic expectations. That 10spd is magic but don’t expect it to grunt it out like my D.Max. 

 

That black 2018 Duramax for example had just under 2k payload. 

Ry Guy Enthusiast

Ry Guy

Posted
Posted

My ‘24 gasser custom has a payload of close to 3600 lbs and the door sticker says rated for ~2750 lbs gooseneck pin weight 

buelldude Enthusiast

buelldude

Posted
Posted

my trailer is stopping me from the gas truck. Well the list of pros/cons points to diesel. Good thread!!!!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • Grumpy Bear
      OCI, not when but why?

      By Grumpy Bear · Posted

      10 Ford and Chevy engines proven to reach 300,000 miles   You may note a common 3K OCI on this list of gas motors. I skipped over the diesels. Dh'O. 
    • jake111
      Gasser Subforum Has Been Quiet - - So, Regenerative Braking and Using L10

      By jake111 · Posted

      Thanks newdude!  By the time manual selection is needed, I'm probably too much of a control-freak to depend on the transmission sensing braking to activate automatic downshifting.  I would be anticipating the situation and already be manually downshifting.   This truck replaced a 2004.5 LLY diesel with the Allison 5-speed.  Putting it in T/H made noticeable differences (when the torque converter locked, upshift points, downshift behavior).  On this 2024 gasser with the 10L1000 I haven't been able to detect much, if any, difference.  Ok, I can never tell now when the torque converter locks up.  But I also don't notice differences in shifting.  For downhills, I've probably already manually downshifted by then anyway.  Since it's also more awkward (than the 2004.5) to engage/disengage I don't even bother.  Or maybe it doesn't really matter with just a 3k lb. camper in the bed?   Thanks also for the list of reasons the charging system might select various voltages.  However, what I am seeing doesn't fall into any of those categories.  It very definitely, and very consistently, rises after coasting/braking.  Maybe not immediately, but not very long after coasting/braking.  Very consistently drops voltage when no longer coasting/braking.  It might also be interacting with the camper battery charging (I might disconnect the camper and see if it changes the charging behavior).  I also need to recheck turning on headlights for when I want to force it to charge the camper.   Another JR, in June I converted the camper to LiFePO4.  Since it's not a good idea to try to charge lithiums directly using truck, I installed a Victron Orion XS DC-DC charger (which BTW is AMAZING!!).  Being cheap, I only had to buy that one item (besides the battery, of course) to do the conversion.  The camper OEM 120v battery charger (only 19 years old and works perfectly) and the truck feed the input to the DC-DC charger (not at the same time).  But I didn't want the camper charger feeding back to the truck so I kept the old separator.  I considered replacing the separator with a 30amp diode but that means more work and might add another 1/2 volt drop.  One thing that surprised me was the voltage drop over the long 10awg wire run, so I can only charge smoothly at 8 amps (because the DC-DC charger is completely configurable).  Another reason I don't want an added voltage drop with the diode.  I might also be a little lazy but all this work is being done under the sink with a small cabinet opening.    
    • davester
      cam upgrade in CA

      By davester · Posted

      apparently CA smog is (or at least was)  checking that the vehicle is using the oem and/or a ca smog approved tune, so I expect you'll fail inspection doing it.
    • davester
      Possible lifter tick after DOD delete

      By davester · Posted

      yes, leaking exhaust will mess up o2 sensor readings, which in turn messes up fuel trims.
    • Grumpy Bear
      Sugar Bears 2015 GMC Terrain SLE-2 2.4 AWD

      By Grumpy Bear · Posted

      286,740 Mile Services   8/6/2026   New AC Compressor. Refrigerant oil and dye, evacuate and charge system.  New exhaust system from cat back.  New Iridium plugs plus replace #3 coil Repair/rewire headlamp wiring (passenger side) and replace all forward bulbs. Polish lenses of both assemblies.  Pull rear rotors, clean and adjust parking assembly. Inspect, clean and grease front calipers. Check pads and shoes.  4 wheel power bleed of brake system. Dot 4 Reset idle speed 50 rpm higher New Serpentine belt.    Will need new pads in the rear in about 5K more miles.    Tax Title and License out the door just short of a grand.    AC clutch had bitten the dust. 1 year warranty on the pick and save replacement. Thing will make a Polar Bear cry Uncle.  He spent quite some time on the wiring. It was in the harness and he does nothing half. I got off cheap. I have considerable more light down the road. Sylvania Silver Star replacements.  Gas seal between the porcelain and shell of plug #3 was blown, cooked the coil. That was the cold miss.  Love the new exhaust. I can sneak into the neighborhood again.  Nice to have a working parking brake again. Belle Tire never got it done. That was disappointing.    This was one of her bigger bills and still way cheaper than a payment even given the oil consumption. This thing cost me under a hundred a month in repairs and normal routine costs. What is my incentive to replace it? 🤔           

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...