Jump to content

Loud humming noise when idling in cold temps

Taylor_S

By Taylor_S
in 6.6L Duramax Diesel (L5P)

 Share

Recommended Posts

Taylor_S New Member

Taylor_S

Posted
Posted (edited)

We recently purchased a 2022 GMC Sierra 3500HD diesel, and just noticed a loud, repetitive noise while idling. It starts, stops, and starts again in a rhythmic timing. It sounds like it’s coming from the air intake area, but I’m no mechanic so I’m not sure what it is. It doesn’t do it consistently, and I notice it more on colder days (30F or below) when letting it warm up in the morning. I’ve found similar discussion which mentioned it being the fan clutch, but others say they’ve replaced it and the sound continues. Is this just an annoyance or something that will wreck the vehicle if it’s not addressed? We haven’t even made the first payment on it yet so I’m pretty distraught over a potential costly repair. It only has 9k miles on it and is practically brand new. This truck was purchased to haul my living quarters horse trailer all over the country, so this has me concerned as I don’t want to have any major issues while on the road with a loaded trailer. 

Edited by Taylor_S
  • Like 1
ArrowsmithPML Enthusiast

ArrowsmithPML

Posted
Posted

Diesels make all sorts of noise in the cold. But around -2 C / 30  F there shouldn't be any significant noise with the exception of the wrong fluids, lose filters (check the air filter seat and housing) and the fuel pump and filter (on the frame rail below the fuel filler location).

 

These trucks need to be plugged in at -10 C to ensure the DEF tank doesn't freeze. I plug my '21 in for nearly 4 months straight but...

GMCustomerService Senior Enthusiast

GMCustomerService

Posted
Posted
On 3/21/2025 at 6:34 AM, Taylor_S said:

We recently purchased a 2022 GMC Sierra 3500HD diesel, and just noticed a loud, repetitive noise while idling. It starts, stops, and starts again in a rhythmic timing. It sounds like it’s coming from the air intake area, but I’m no mechanic so I’m not sure what it is. It doesn’t do it consistently, and I notice it more on colder days (30F or below) when letting it warm up in the morning. I’ve found similar discussion which mentioned it being the fan clutch, but others say they’ve replaced it and the sound continues. Is this just an annoyance or something that will wreck the vehicle if it’s not addressed? We haven’t even made the first payment on it yet so I’m pretty distraught over a potential costly repair. It only has 9k miles on it and is practically brand new. This truck was purchased to haul my living quarters horse trailer all over the country, so this has me concerned as I don’t want to have any major issues while on the road with a loaded trailer. 

We would like to learn more about this mysterious sound coming from your Sierra, Taylor. So that we can assist, we ask that you send us an email at [email protected] with your full VIN, mileage, and the name and address of your dealership. Once we have this, we can reach out to the team at your dealership directly! By sending us a message, you consent to the information you provide being monitored and recorded by GM or those acting on GM’s behalf, subject to the GM Privacy Statement: https://www.gm.com/privacy-statement.

  • 3 weeks later...
Crazy Canuck Enthusiast

Crazy Canuck

Posted
Posted
On 3/21/2025 at 9:20 AM, ArrowsmithPML said:

Diesels make all sorts of noise in the cold. But around -2 C / 30  F there shouldn't be any significant noise with the exception of the wrong fluids, lose filters (check the air filter seat and housing) and the fuel pump and filter (on the frame rail below the fuel filler location).

 

These trucks need to be plugged in at -10 C to ensure the DEF tank doesn't freeze. I plug my '21 in for nearly 4 months straight but...

I could be mistaken but I don't believe the DEF is heated when plugged in.  DEF freezes at -11C and it just freezes until the heater thaws it (powered by the truck when running).  It does not expand like water.  Agree though when cold, the Diesels make all sorts of noise as the idle up, drag the torque converter or whatever.

newdude Senior Enthusiast

newdude

Posted
Posted
On 3/21/2025 at 9:20 AM, ArrowsmithPML said:

Diesels make all sorts of noise in the cold. But around -2 C / 30  F there shouldn't be any significant noise with the exception of the wrong fluids, lose filters (check the air filter seat and housing) and the fuel pump and filter (on the frame rail below the fuel filler location).

 

These trucks need to be plugged in at -10 C to ensure the DEF tank doesn't freeze. I plug my '21 in for nearly 4 months straight but...

 

 

DEF heater has nothing to do with the block heater.  The DEF heaters are their own thing that are powered by the truck when running.  Heater in the tank and then one or two in the fluid supply line.

Sonny R Enthusiast

Sonny R

Posted
Posted

I am having the same sound. No good answer on what it could be. Sounds like a cow mooing. Goes away once the engine warms up. Very aggravating noise.

Maher Usman New Member

Maher Usman

Posted
Posted
On 3/21/2025 at 4:34 PM, Taylor_S said:

We recently purchased a 2022 GMC Sierra 3500HD diesel, and just noticed a loud, repetitive noise while idling. It starts, stops, and starts again in a rhythmic timing. It sounds like it’s coming from the air intake manifold area, but I’m no mechanic so I’m not sure what it is. It doesn’t do it consistently, and I notice it more on colder days (30F or below) when letting it warm up in the morning. I’ve found similar discussion which mentioned it being the fan clutch, but others say they’ve replaced it and the sound continues. Is this just an annoyance or something that will wreck the vehicle if it’s not addressed? We haven’t even made the first payment on it yet so I’m pretty distraught over a potential costly repair. It only has 9k miles on it and is practically brand new. This truck was purchased to haul my living quarters horse trailer all over the country, so this has me concerned as I don’t want to have any major issues while on the road with a loaded trailer. 

Could be the fan clutch, but since it's mostly on cold mornings, it might just be normal. If others have replaced it and the noise still happens, it could be something like the turbo or air intake. With only 9k miles, you’re probably still under warranty, so get it checked out. It’s likely not a big issue, but better to be safe, especially with towing.

GMCustomerService Senior Enthusiast

GMCustomerService

Posted
Posted
On 4/9/2025 at 5:23 PM, Sonny R said:

I am having the same sound. No good answer on what it could be. Sounds like a cow mooing. Goes away once the engine warms up. Very aggravating noise.

Have you connected with your dealership regarding this noise concern, Sonny? They are our eyes and ears in the field, and are best equipped to take a look and address your concerns. We are happy to act as an extra layer of assistance, and we ask that you reach out via email to [email protected] we can help. We look forward to your email. By sending us a message, you consent to the information you provide being monitored and recorded by GM or those acting on GM’s behalf, subject to the GM Privacy Statement: https://www.gm.com/privacy-statement. 

  • 2 months later...
Sonny R Enthusiast

Sonny R

Posted
Posted

Yes, brought it to a GM dealer one morning. Cold temps, engine was not warmed up and it was "mooing". Tech said he never heard that before. That was this past winter. Hot now and the cow has left for the summer.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • Aimatdeer
      Ac not keeping up

      By Aimatdeer · Posted

      Monday looks like a good day for the dealer to test an ac issue. Hopefully it all turns out good.
    • CamGTP
      Gas Prices

      By CamGTP · Posted

      Paid $2.72 for E85 today.
    • Atlas
      Gas Prices

      By Atlas · Posted

      Welcome back! No, it definitely doesn't pass the sniff test. Even "ceasefire" needs an alternative definition these days.    $5.29 at Kroger today
    • bluev8
      Intermittent no-code issues on 2022.5+ V8 trucks — what did the shop fail to capture?

      By bluev8 · Posted

      That makes sense, and I think you are describing the real product problem. Capturing data is the easy part. If the owner or technician has to manually dig through five minutes of millisecond-level logs, the product has already failed. The device would be at the ECM harness, not at the OBD port, so I agree that data retrieval and event marking need to be thought through carefully. The way I am thinking about the architecture is: The recorder itself should not depend on a phone, app, Bluetooth, Wi-Fi, or cloud connection to capture the event. It should always keep a local rolling buffer and lock the event locally. A button, phone app, or small cabin device would only act as an event marker. If the driver feels a stumble and presses the button 10–30 seconds later, the pre-buffer has to already contain the useful data. For data retrieval, the practical options would be a sealed service USB lead, Wi-Fi download, or a phone/cabin companion device. I would not expect the owner to remove the ECM-side module or work with raw files directly. The cloud or AI side would be for interpretation, not for capturing the event. The truck may have no connection when the issue happens, so the evidence has to be saved locally first. After that, cloud processing could help decode the data, compare it against baselines, and generate a readable report. For the first version, I would keep the automatic triggers conservative and objective: driver event marker bus-off error passive voltage drop / brownout device reset FIFO or queue overflow a normally periodic message disappearing side-to-side communication mismatch, if the topology supports that For “learning normal,” I agree with your point, but I would not want to overclaim it as automatic root-cause diagnosis at first. A realistic first step would be learned baseline comparison for that specific vehicle and operating condition. For example, a value would only be compared against similar conditions: RPM range load / MAP throttle position gear / vehicle speed coolant and oil temperature battery voltage AFM/DFM state, if decoded and validated Then the report could flag things like: this periodic message disappeared compared with its normal timing this value deviated from this vehicle’s normal range under similar conditions the same abnormal pattern repeated after the same type of event the anomaly occurred together with voltage, oil-pressure, misfire, or communication changes But I would still call that “abnormal pattern detected,” not “replace this part,” unless there is enough validated repair data behind it. So the intended product would not be “here is a huge log.” It would need to be an event package: what triggered the capture how much pre/post data was preserved what changed before and after the event whether the device itself reset, overflowed, or saw a bus error selected graphs around the event raw data only as supporting evidence From your perspective, what would make this kind of report useful instead of just another datalog? For example: What are the top 5 parameters or events you would want highlighted first? Would you trust a learned baseline for that specific vehicle, or would you prefer fixed thresholds? How much false-positive flagging would be acceptable before you stopped looking at the reports? What would a one-page report need to show for an independent shop to take it seriously? For misfire, AFM/DFM, oil pressure, or U-code complaints, what would you want the tool to flag automatically?
    • scotthvac.net
      2022-24 halogen - led grille swap

      By scotthvac.net · Posted

      2024 Silverado 2500 HD LTZ grille no camera Parts list   84603331 84913656 84913657 84913654 84913655 84911567 84911568 85646092 85646093 85797921 85797922   11570637  x10-15   grille/bumper bolts 11546500  x10      grille clips 11571006  x10      push/retainer clips 11546454  x6       nut retainers 11611609  x6       M5 bolts 11610700  x6       molding/trim retainers

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...