Jump to content

Scan tool

Lpfm1990
 Share

Recommended Posts

Lpfm1990 Enthusiast

Lpfm1990

Posted
Posted

Quick question, and not sure if this is even the right sub section for it? But wanting to grab a scan-tool. Don’t need the most “pro-level” tool, but enough to read codes and get into the oem side menu to view various modules for codes. Also bonus points if it works on a Toyota car also (I have a chr I use as a work ride to save on gas and wear on the truck) 

 

now I know it’s the new global b system on my new truck. So is there suggestions of a reasonable one? Doesn’t need to have a Bluetooth dongle either. There’s like 10 different ones and I have no clue to what’s a good one or a waste. 
 

thanks guys 

  • Like 1
SoCal Angler Enthusiast

SoCal Angler

Posted
Posted

I have been considering a scan tool for my ‘23 6.6L gas with 6 speed and Toyota vehicles.  I believe bi directional scan tools are preferred to allow for more than just pulling codes.

 

The Car Care Nut over on YT has pretty good things to say about one that he reviews on his channel.  He discussed its uses on Toyotas, but it works on most vehicles. Vid is 3 years old and no updates on the tool.

 

 

Capt Bob Enthusiast

Capt Bob

Posted
Posted

Not sure if this even fits what you’re looking for but, I running the Scan Gauge III.

It will give you codes and the ability to clear same but its basic ability is to provide real time engine operation parameters. Maybe not what you are seeking. It’s hardwired and so far, has worked very well on my 2024.

 

 

revrnd Senior Enthusiast

revrnd

Posted
Posted (edited)

Make sure what ever you're looking @ works on the current GM vehicles. I bought a Creader Launch Elite G. It only partially worked w/ my 2024. i bought the adapter that supposedly would correct this, it didn't.

 

I wanted to be able to adjust the TPMS thresholds, but am unable to w/ this tool. Apparently there are scan tools that do permit this.

 

I guess I can use it for any code reading...

Edited by revrnd
  • Like 1
revrnd Senior Enthusiast

revrnd

Posted
Posted (edited)
On 4/12/2025 at 10:13 AM, Chopper_Man said:

I use the Autel MK900-BT, does everything I need on all my vehicles.

 

Do you have anything newer than the 2022? According to others on here, GM changed the 'architecture' w/ the '23s or '24s. What worked on previous model years may not be compatible.

Edited by revrnd
Handy Enthusiast

Handy

Posted
Posted

I have been using a BlueDriver for several years.  It is very small which makes it convenient to keep in my center console, and move it from vehicle to vehicle for trips.  It interfaces with your smartphone via Bluetooth.  I have been getting a nuisance code on my 2013 C3500 for years, and while driving, I am able to plug in the BlueDriver, open the app on my phone, clear the code, unplug the BlueDriver, and toss it back in the center console.  I had a turbo code on my 2005 K3500 and went into limp mode while towing a trailer on a narrow canyon road.  I almost came to a stop with traffic behind me.  I was able to quickly plug the BlueDriver in, clear the code, exit limp mode, and resume my drive.  There was nothing wrong with the turbo, and it never came up again.  https://a.co/d/4IiAABx

Handy Enthusiast

Handy

Posted
Posted
On 4/11/2025 at 3:46 PM, revrnd said:

I wanted to be able to adjust the TPMS thresholds, but am unable to w/ this tool. Apparently there are scan tools that do permit this.

I purchased the Autel TPMS Programming Tool TS508WF 2024 Version after reading advice on this forum.  I used it to reprogram my 2024 2500HD tire pressure threshold down to 50 psi because that is what I run my tires at, and the low tire pressure warnings were a pain every time I started the truck.  It worked great, and I have also been able to use it to relearn the tire locations after a rotation.  A little pricey, but the cheapest way to reprogram short of having a friend do it.

  • Thanks 1
revrnd Senior Enthusiast

revrnd

Posted
Posted
On 4/14/2025 at 10:01 PM, Handy said:

I purchased the Autel TPMS Programming Tool TS508WF 2024 Version after reading advice on this forum.  I used it to reprogram my 2024 2500HD tire pressure threshold down to 50 psi because that is what I run my tires at, and the low tire pressure warnings were a pain every time I started the truck.  It worked great, and I have also been able to use it to relearn the tire locations after a rotation.  A little pricey, but the cheapest way to reprogram short of having a friend do it.

 

Thanks. I checked online & that sounds like what I should've bought in the 1st place. Any Canucks interested in what I posted previously, PM me...

revrnd Senior Enthusiast

revrnd

Posted
Posted

I ordered the TS501. Not really sure what the difference is, but is priced cheaper than the TS508

 

Screenshot_20250418_162444_Chrome.thumb.jpg.b4a8b033a2a8ced426999e7f5f65715e.jpg

 

Screenshot_20250418_185716_Chrome.thumb.jpg.904b10486c0ed13063d200d4625670a0.jpg

  • Like 2
Chuck FB Enthusiast

Chuck FB

Posted
Posted

I had bought my TS508WF from Napa and I got a little off of it so it was 325.00, then early this month Princess puts it on sale for 280.00 and actually that sale ends tomorrow as per April 20th. However with Princess you can either possibly get a raincheck if they don't have one in stock or if you have that sale catalogue you can typically walk in after the sale and point to the price in your catalogue and they will sell it for that price. The regular price at Princess is 400.00 so that was a crap price.

 

Good question about the 501 vs the 508, I am guessing that the 508WF would be the wifi difference but a regular 508 I have no idea.

  • Like 1
revrnd Senior Enthusiast

revrnd

Posted
Posted
38 minutes ago, Chuck FB said:

I had bought my TS508WF from Napa and I got a little off of it so it was 325.00, then early this month Princess puts it on sale for 280.00 and actually that sale ends tomorrow as per April 20th. However with Princess you can either possibly get a raincheck if they don't have one in stock or if you have that sale catalogue you can typically walk in after the sale and point to the price in your catalogue and they will sell it for that price. The regular price at Princess is 400.00 so that was a crap price.

 

Good question about the 501 vs the 508, I am guessing that the 508WF would be the wifi difference but a regular 508 I have no idea.

I've never thought of looking for scan tools @ PA before. If I'm in Oshawa, I usually make a stop @ the 1 next door in Whitby.

 

  • Like 1
Chuck FB Enthusiast

Chuck FB

Posted
Posted (edited)
11 minutes ago, revrnd said:

I've never thought of looking for scan tools @ PA before. If I'm in Oshawa, I usually make a stop @ the 1 next door in Whitby.

 

You certainly didn't miss out on anything with their regular price, just a fluke they happened to have a sale on them just to piss me off LOL. Certainly not worth 20.00 for a special trip and find they don't have any as their tracking of what the store website says they have and what they actually have are pretty sad at times and part of that is there system and part of it is certain items that walk out under someone elses power.

 

Some of what Princess will have in the way of scan tools are there because they are out of date and on their way out, not made anymore etc and probably got a smoking deal on them to flog off. The 508 isn't there yet in that category though.

Edited by Chuck FB
  • Like 1
revrnd Senior Enthusiast

revrnd

Posted
Posted

Supposed to arrive next Fri'. I'm sure I'll be asking a few questions. I'm not really all that savvy w/ this stuff LOL

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • ryan35205
      Lets Talk Z60 Suspension

      By ryan35205 · Posted

      Did the KYBs keep it the same height in the front? I was concerned that pre-assembled assembly would raise it up an inch to standard non-z60 height.. I guess which it would make the rake 1 inch instead of 2 inches.
    • Grumpy Bear
      OCI, not when but why?

      By Grumpy Bear · Posted

      Thank you for keeping the train on the tracks and for a thoughtful engagement. I enjoyed the reflection on a previous stance to refine and improve your position. I like that inquisitive flexibility about you Atlas.    No the process isn't sterile. Hundreds, perhaps thousands of miles of piping, vessels, pumps. Chevron, the people I worked for, were keenly aware that there is a market for what is known as their "ISOCLEAN" line of lubricants. These are lubricants that are the same as those sold bulk that are further processed by filtration to a level your particular application demands. They will filter and package and provide lab documentation as required. Do not kid yourself. Every gallon of oil that goes into a Chevron Turbine, reciprocating compressor, generator is prefiltered and tested before being charged. Lest wise it was when I was there in the plants I worked in.    There are requirements set by manufactures for the cleanliness of the oils used in their equipment. OTR such as CUMMINS has standards shared with customers on this. Commercial interest selling to Ma and Pa do, but don't share that information. Not even upon request but internally, they do exist.    The GM study sited, (Graph from Machinery Lubrication in previous post) only shows "relative" importance.  I find that fascinating. By constructing the graph like this they admit there are dozens of factors in engine life and via scientific method determined the effect of 'relative cleanliness' on engine life not in miles but in 'FACTORS'. This allows a certain amount of reverse engineering does it not?   They even provided some touchstones. Beta 75 as a reference point. Wonderful stuff!!   Smaller blenders CAN and some DO take the time and effort to do better than a refinery or large bulk blender, like Warren Oil, in improving the "in the can" cleanliness. No I don't have a list but testing could generate that information.    Again, but one of several levers we can pull to improve engine life. The simplest is keeping a clean work station while doing your own oil changes.     
    • Mykel544
      New Guy from Oklahoma

      By Mykel544 · Posted

      Thank you. I'll give it a try 
    • Grumpy Bear
      OCI, not when but why?

      By Grumpy Bear · Posted

      I just spent the last 45K miles doing samples every oil change over more than a full year to get the data for seasons and break-in to broke in.    I found the same thing to be true. Something was always teetering on done or had stepped off the cliff long before the OLM was DOA. In fact, I found about a thousand mile difference between summer and winter. That is during the winter half the OLM was STILL too long. Even the severe schedule was to long in the winter.   Now having done the work I can say I was NOT DISAPOINTED. I saw nothing I didn't already know. Nothing my father hadn't already demonstrated in his 2K OCI's pushing dated iron on dated oils and weak filters to mileages well beyond 300K.   Building on his work through use of Lab testing it wasn't hard to find the correlation between 'sight/feel/odor, the things dad relied on, and test results. Use of current viscosity stable chemistries & filters has pushed that marker for my motors out to 3K summer, 4K winter.    So the early lies were 3K on conventional oil and the lie upon the lie was 7K+. turns out to be off by a factor of two.    So... it is true that modern chemistry has doubled the useful oil life. But the base milage that came from was off by double. It's how good lies work. Partly true, sometimes mostly true so that your meter isn't set off. It also means that non-shear-stable shelf oils are only now as good as the old oils were in their best case scenario.    So the question now is how do we improve on that? Thus the question into cleanliness among the other items listed in the post quoted below.    If this bores you, feel free not to participate.       
    • newdude
      2027 Chevrolet Silverado: Official Discussion

      By newdude · Posted

      Is it though?  Like LTZ, not a high take rate.  Current Sierra has AT4, Denali and Elevation as its main bread winners.  Each trim accounting for 25-35% of sales for Sierra.  SLT makes up about 10-15% at best.        Like others have predicted here for GMC, it will be:   - Pro (equal to WT Chevy)   - Elevation (replaces SLE and SLT)   - AT4 (and X)   - Denali (and Ultimate).  

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...