Jump to content

Recommended Posts

Posted

only if it's leaking.

maybe the serpentine and/or a/c belts if they are pretty cracked, and check/replace the idler/tensioner pulleys if they are making noise.

spark plug wires

 

  • Like 1
Posted
23 hours ago, countryguy1717 said:

Coming up on 120k. What's y'alls take on preventative maintenance besides oil spark plugs? Should I replace water pump?

 

My take? Routine maintenance is preventative maintenance. Routine maintenance is more frequent than the book "Normal" maintenance. In fact, IMO, there is no such thing as normal. All service is severe so use the "Severe" schedule and if you book hasn't such a table halve the normal schedule. Now that said....

 

You won't find in that book a replacement time or miles for most hard parts. Yes there are a few, like plugs. But water pumps, brakes, etc. have lives dependent on service/use and environment.

 

As Dave mentioned, Inspect and replace what needs replacing, service what does not and as diyer2 mentions, don't forget the fluids we don't routinely look at or change. (Brake fluid power flush, coolant ever 5 years and so on.)  

  • Like 1
Posted

Are u the original owner? Do you have the maintenance records on what has been done?

Personally, I do the fluids more frequently that GM says. If no previous records on fluid changes I would: 

1. drain & fill transmission ATF, about 4 quarts which can be sucked out the fill tube. Not sure which transmission u have but assume 6 speed. It take Dexron vi

2 drain & fill transfer case if 4x4. Dexron VI 

3. I'd also drain & fill front & rear differentials 

4 at the least, replace brake fluid in reservoir. 

5. Replace your air filter & cabin filter.

Just my opinion 

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.6k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,993
    Total Members
    8,960
    Most Online
    President Roberto
    Newest Member
    President Roberto
    Joined
  • Who's Online   2 Members, 0 Anonymous, 266 Guests (See full list)

  • Latest Articles

  • Posts

    • I don't wanna do major surgery/upgrades, behind-the-dash work, add amps, change radio etc. on my '26 std cab WT. On the WT, it has the base 7" IOR infotainment setup, and only two speakers (doors). Since I listen to classical, looked around for speakers that do well and dug thru reviews. Two-way speakers were found to be better than 3-way. So I've ordered a pair of  Infinity Reference REF-9632IX 2 way speakers.  [These may  or may not have been discontinued / succeeded by the 3-way ...9633 ones.]    These speakers are lauded for 3 ohm and 94db sensitivity spec so they'll work well for ordinary base car radios without amps and offer better performance (quality,  strength) than  default base paper-cone speakers. They'll be installed in a few days and I'll let y'all know what I think. Bill W San Jose      
    • Thanks!   Changed out the rear shocks today to Bilstein 5100s.  So far feel much better. The stock Rancho were wore out.  Lots of heavy hauling (2 moves, home renovations, etc).  Next up is new BFG tires Monday.  Cant wait the current tires have little to no wet traction and are super loud (hum)    
    • Ok, I got the all the codes. What do you all think would be a place to start?
    • How about I just point to the factory pans stand pipe little drain plug and claim its a pan with a real drain plug !. I just couldn't swallow the fact that a Dorman pan which at this point is probably the only pan out there that fits the gas version truck cost that much up here in Canada so I decided initially anyway to skip it and see what I thought of pulling the pan method and down the road if I felt inclined enough then I would either install a drain plug kit in the factory pan if there is enough room for it, or have a bung welded onto it, or put an aftermarket pan on. The thing is if the pan is not pulled then the magnets in the pan can't be inspected and cleaned or if wanting to change out the filter. However of course it certainly would make the job easier to be able to drop the oil first before having to handle the pan if dropping the pan that go around was the goal.    I knew a guy locally that was doing custom field spraying years ago with a pickup pulling a ground driven sprayer, I believe it was a GM pickup with an automatic trans. He had a drain plug in his pan and would drop the oil out of it once a week and top it back up through the dipstick tube to keep refreshing a portion of the oil often and that made the transmission last far longer than had he done nothing. Soft fields pulling 500 gallons of water at the start of each mixed up sprayer tank batch and in low range sucking along. I imagine he got some tips from other custom sprayer outfits doing the same thing at the time and learning from their blown up tranny mistakes. Transmissions then had no lock up converter so would cook the crap out of the fluid slipping that much and it would not have been synthetic fluid either. 
    • 3.39 Kroger’s in Montgomery Texas. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...